A study on effects of a new two-step strain induced melt activation process on characteristics of Al 7075 alloy
- 25 November 2017
- journal article
- research article
- Published by Walter de Gruyter GmbH in International Journal of Materials Research
- Vol. 108 (12) , 1073-1080
Abstract
It is well-known that the strain induced melt activation process results in a globular microstructure which improves the hardness and the ultimate tensile stress. However, its disadvantage is degrading some other properties such as elongation and formability due to the presence of continuous and brittle intermetallic compounds along with the formation of eutectic structures at grain boundaries. Hence, the aim of this research is to introduce a new process called two-step strain induced melt activation to overcome these drawbacks and to improve the microstructure and the formability of Al 7075 alloy. This new process yielded a globular structure and modified the microstructure. Also, the resultant precipitates were discontinuous with a more homogeneous distribution and the eutectic mixture was eliminated. Moreover, the alloy formability and the hardness were effectively enhanced by performing a rolling process.Keywords
This publication has 20 references indexed in Scilit:
- High-Temperature Compressive Resistance and Mechanical Properties Improvement of Strain-Induced Melt Activation-Processed Al-Mg-Si Aluminum AlloyMetals, 2016
- Microstructure Evolution and High-Temperature Compressibility of Modified Two-Step Strain-Induced Melt Activation-Processed Al-Mg-Si Aluminum AlloyMetals, 2016
- Solidification of pure aluminium affected by a pulsed electrical field and electromagnetic stirringJournal of Materials Science, 2015
- Effects and on-line prediction of electromagnetic stirring on microstructure refinement of the 319 Al–Si hypoeutectic alloyJournal of Alloys and Compounds, 2009
- Cooling slope casting to obtain thixotropic feedstock II: observations with A356 alloyJournal of Materials Science, 2008
- Influence of grain refinement and modification on microstructure and mechanical properties of Al–7Si and Al–7Si–2.5Cu cast alloysMaterials Characterization, 2008
- Microscopic observation of cold-deformed Al–4Cu–Mg alloy samples after semi-solid heat treatmentsMaterials Characterization, 2005
- Semisolid microstructure evolution of the predeformed AZ91D alloy during heat treatmentJournal of Alloys and Compounds, 2005
- Liquid formation and microstructural evolution during re-heating and partial melting of an extruded A356 aluminium alloyActa Materialia, 2005
- Casting of aluminum alloy ingots for thixoforming using a cooling slopeJournal of Materials Processing Technology, 2001