High-Temperature Compressive Resistance and Mechanical Properties Improvement of Strain-Induced Melt Activation-Processed Al-Mg-Si Aluminum Alloy
Open Access
Abstract
Even though the high-temperature formability of Al alloys can be enhanced by the strain-induced melt activation (SIMA) process, the mechanical properties of the formed alloys are necessary for estimation. In this research, a modified two-step SIMA (TS-SIMA) process that omits the cold working step of the traditional SIMA process is adopted for the 6066 Al-Mg-Si alloy to obtain globular grains with a short-duration salt bath. The high-temperature compressive resistance and mechanical properties of TS-SIMA alloys were investigated. The TS-SIMA alloys were subjected to artificial aging heat treatment to improve their mechanical properties. The results show that the TS-SIMA process can reduce compression loading by about 35%. High-temperature compressive resistance can be reduced by the TS-SIMA process. After high-temperature compression, the mechanical properties of the TS-SIMA alloys were significantly improved. Furthermore, artificial aging treatment can be used to enhance formed alloys via the TS-SIMA process. After artificial aging treatment, the mechanical properties of TS-SIMA alloys are comparable to those of general artificially-aged materials.Keywords
This publication has 12 references indexed in Scilit:
- High-temperature deformation resistance and forming behavior of two-step SIMA-processed 6066 alloyMaterials Science and Engineering: A, 2016
- The effect of strain-induced melt activation process on the microstructure and mechanical properties of Ti-refined A6070 Al alloyMaterials & Design (1980-2015), 2013
- An investigation on the microstructural evolution and mechanical properties of A380 aluminum alloy during SIMA processJournal of Alloys and Compounds, 2011
- Characterization of Globular Microstructure in NMS Processed Aluminum A356 Alloy: The Role of Casting SizeAdvanced Materials Research, 2011
- Recrystallization Behavior of 7175 Al Alloy during Modified Strain-Induced Melt-Activated (SIMA) ProcessMATERIALS TRANSACTIONS, 2006
- Semi-solid behavior of new Al–Si–Mg alloys for thixoformingMaterials Science and Engineering: A, 2005
- Semisolid metal processingInternational Materials Reviews, 2002
- Evolution of near-equiaxed microstructure in the semisolid stateMaterials Science and Engineering: A, 2000
- A comparative characterization of near-equiaxed microstructures as produced by spray casting, magnetohydrodynamic casting and the stress induced, melt activated processMaterials Science and Engineering: A, 2000
- Precipitation behaviour of Al-Mg-Si alloys with high silicon contentJournal of Materials Science, 1997