Effect of superstructure characteristics on seismic response of an RC building retrofitted with lead rubber bearings
Open Access
- 28 April 2026
- journal article
- research article
- Published by Springer Nature in Bulletin of Earthquake Engineering
- p. 1-29
Abstract
This paper investigates the change in seismic demands of a reinforced concrete (RC) building retrofitted by seismic isolation technique, due to change in superstructure characteristics. First, an RC building that possesses the general characteristics of fixed-base building stock in Türkiye is identified. Then, it is retrofitted by means of Lead Rubber Bearings (LRBs) and subjected to bidirectional ground motion excitations through nonlinear response history analyses (NRHA). Concrete compressive strength, dimensions of both beams and columns, and first story height are the parameters considered in the analyses. Two different numerical models are established by considering both linear and nonlinear element definitions for the superstructure. In either case, LRBs are represented by deteriorating hysteretic force-displacement relations that consider the effect of heating in the lead core during cyclic motion. Results indicate that increasing the beam dimensions is the most effective approach in retrofitting of the analyzed structural model to reduce inter-story drift ratios (ISDRs). An increase in beam dimensions led to an approximately 30% reduction in ISDRs, while enhancements in concrete compressive strength and dimensions of columns yielded reductions of nearly 20%. The elastic superstructure model may lead to underestimated ISDRs by more than 1.5 folds compared to its nonlinear counterpart.Keywords
Funding Information
- Bursa Technical University
This publication has 51 references indexed in Scilit:
- Developing collapse fragility curves for base‐isolated buildingsEarthquake Engineering & Structural Dynamics, 2018
- An alternative approach for the seismic rehabilitation of existing RC buildings using seismic isolationEarthquake Engineering & Structural Dynamics, 2015
- An advanced numerical model of elastomeric seismic isolation bearingsEarthquake Engineering & Structural Dynamics, 2014
- Lead core heating in lead rubber bearings subjected to bidirectional ground motion excitations in various soil typesEarthquake Engineering & Structural Dynamics, 2013
- Inelastic response of RC frame buildings with seismic isolationEarthquake Engineering & Structural Dynamics, 2012
- Effect of lead core heating on the seismic performance of bridges isolated with LRB in near‐fault zonesEarthquake Engineering & Structural Dynamics, 2012
- Successful performance of a base-isolated hospital building during the 17 January 1994 Northridge earthquakeThe Structural Design of Tall Buildings, 1996
- Seismic Design of Reinforced Concrete and Masonry Buildings1992
- Random vibration of hysteretic systems under bi‐directional ground motionsEarthquake Engineering & Structural Dynamics, 1986
- Lead‐rubber hysteretic bearings suitable for protecting structures during earthquakesEarthquake Engineering & Structural Dynamics, 1982