Performance optimization for solar photovoltaic thermal system with spiral rectangular absorber using Taguchi method
Open Access
- 11 October 2024
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 14 (1) , 1-13
Abstract
Solar collector systems efficiently transform sunlight into energy that may be used to meet various needs. This research aimed to use the Taguchi method to determine the ideal operating parameters for a solar thermal collector with a rectangular spiral absorber. Controllable parameters including mass flow rate, solar radiation, and absorber design were manipulated during the energy recovery process, and features like PV temperature and outlet water temperature were used to assess the system’s effectiveness. The findings indicate that certain criteria significantly affect response indicators. The observed percentage contribution of absorber design, solar radiation, and the mass flow rate was 69.19%, 27.99%, and 2.83% in PV surface temperature. In comparison, the individual percentage contributions were 73.63%, 13.51%, and 10.57% for absorber design, solar radiation and mass flow rate for water output temperatures. The present model’s R2 values for PV and outlet water temperatures are 97.24% and 99.67%, respectively. The Predictive regression model was found in fine harmony and the maximum percentage error is limited to 0.68%. The maximum analytical electrical efficiency was observed with a spiral rectangular absorber of 14.57% at the lowest mass flow rate of 0.04 kg/s at the lowest radiation level of 600 W/m2. In comparison, maximum analytical thermal efficiency was observed with a spiral rectangular thermal absorber of 63.56% at the highest flow rate of 0.06 kg/s and the highest solar radiation level of 1000 W/m2. The analytical and experiment findings were in better agreement in this study, with the highest relative error of 7.52%. According to the study’s findings, the rectangular absorber-based PVT system is at its best at a higher mass flow rate to lower PV temperature and boost thermal energy recovery via water. The present research work can be extended for exergy, environmental, and economic feasibility analysis.Keywords
This publication has 44 references indexed in Scilit:
- Thermodynamic and exhaust emission studies of CI engine powered by neem oil methyl ester blends doped with nickel oxide nano additivesEnvironmental Progress & Sustainable Energy, 2024
- Relative exergy and energy analysis of DI‐CI engine fueled with higher blend of Azadirachta indica biofuel with n‐butanol and NiO as fuel additivesEnvironmental Progress & Sustainable Energy, 2023
- Modelling and real time performance evaluation of a 5 MW grid-connected solar photovoltaic plant using different artificial neural networksEnergy Conversion and Management, 2023
- Proposing and optimization of a parabolic trough solar collector integrated with a photovoltaic module layerApplied Thermal Engineering, 2023
- Investigation of waste cooking oil–diesel blend with copper oxide additives as fuel for diesel engine under variations in compression ratioInternational Journal of Energy and Environmental Engineering, 2022
- Multi-objective optimization of a photovoltaic thermal system with different water based nanofluids using Taguchi approachApplied Thermal Engineering, 2022
- Simulation CFD and experimental investigation of PVT water system under natural Malaysian weather conditionsEnergy Reports, 2020
- Lattice geometry controlled synthesis of Cu – Doped nickel oxide nanoparticlesCeramics International, 2018
- Thermal performance investigation and optimization of buildings with integrated phase change materials and solar photovoltaic thermal collectorsEnergy and Buildings, 2016
- Optimization and practical verification of system configuration parameter design for a photovoltaic thermal system combined with a reflectorJournal of Intelligent Manufacturing, 2015