Ammonia emissions from a dairy housing and a wastewater treatment plant quantified with an inverse dispersion method accounting for deposition loss
Author:
Preprint
- 22 October 2023
- preprint
- Published by California Digital Library (CDL) in EarthArXiv
Abstract
Ammonia (NH3) emissions negatively impact air, soil, and water quality, hence human health and biodiversity. Significant emissions, including the largest sources, originate from single or multiple structures, such as livestock facilities and wastewater treatment plants (WWTPs). The inverse dispersion method (IDM) is effective in measuring total emissions from such sources, although depositional loss between the source and point of measurement is often not accounted for. We applied IDM with a deposition correction to determine total emissions from a representative dairy housing and WWTP during several months in autumn and winter in Switzerland. Total emissions were 1.19 ± 0.48 and 2.27 ± 1.53 kg NH3 d-1 for the dairy housing and WWTP, respectively, which compared well with literature values, despite the paucity of WWTPs data. A concurrent comparison with an inhouse tracer ratio method at the dairy housing indicated an offset of the IDM emissions by <20%. Diurnal emission patterns were evident at both sites mostly driven by changes in air temperature with potential lag effects such as following sludge agitation. Modelled deposition corrections to adjust the concentration loss detected at the measurement point with the associated footprint were 22-28% of the total emissions and the cumulative fraction of deposition to emission modelled with distance from the source was between 7-12% for the measurement distances (60-150 m). Although estimates of depositional loss were plausible, the approach is still connected with substantial uncertainty, which calls for future validation measurements. Longer measurement periods encompassing more management activities and environmental conditions are required to assess predictor variable importance on emission dynamics. Combined, IDM with deposition correction will allow the determination of emission factors at reduced efforts and costs, thereby supporting the development and assessment of emission reducing methods and expand the data availability for emission inventories.Keywords
All Related Versions
- Published version: Journal of the Air & Waste Management Association, 73 (12), 930.
This publication has 63 references indexed in Scilit:
- Using the inverse dispersion method to determine methane emissions from biogas plants and wastewater treatment plants with complex source configurationsAtmospheric Environment: X, 2022
- Ammonia and greenhouse gas emissions from slurry storage - A reviewAgriculture, Ecosystems & Environment, 2020
- Ammonia emissions from liquid manure storages are affected by anaerobic digestion and solid-liquid separationAgricultural and Forest Meteorology, 2018
- Ammonia Abatement with Manure Storage and Processing Techniques2015
- Data filtering for inverse dispersion emission calculationsAgricultural and Forest Meteorology, 2014
- Land Use Specific Ammonia Deposition Velocities: a Review of Recent Studies (2004–2013)Water, Air, & Soil Pollution, 2014
- Ammonia emissions from anaerobic treatment lagoons at sow and finishing farms in OklahomaAgricultural and Forest Meteorology, 2013
- Assessment of the backward Lagrangian Stochastic dispersion technique for continuous measurements of CH4 emissionsAgricultural and Forest Meteorology, 2009
- Performance of an industrial biofilter from a composting plant in the removal of ammonia and VOCs after material replacementJournal of Chemical Technology & Biotechnology, 2009
- Determining ammonia emissions from a cattle feedlot with an inverse dispersion techniqueAgricultural and Forest Meteorology, 2007