Ammonia emissions from a dairy housing and wastewater treatment plant quantified with an inverse dispersion method accounting for deposition loss
Open Access
- 13 November 2023
- journal article
- research article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 73 (12) , 930-950
Abstract
Ammonia (NH3) emissions negatively impact air, soil, and water quality, hence human health and biodiversity. Significant emissions, including the largest sources, originate from single or multiple structures, such as livestock facilities and wastewater treatment plants (WWTPs). The inverse dispersion method (IDM) is effective in measuring total emissions from such sources, although depositional loss between the source and point of measurement is often not accounted for. We applied IDM with a deposition correction to determine total emissions from a representative dairy housing and WWTP during several months in autumn and winter in Switzerland. Total emissions were 1.19 ± 0.48 and 2.27 ± 1.53 kg NH3 d-1 for the dairy housing and WWTP, respectively, which compared well with literature values, despite the paucity of WWTPs data. A concurrent comparison with an inhouse tracer ratio method at the dairy housing indicated an offset of the IDM emissions by < 20%. Diurnal emission patterns were evident at both sites mostly driven by changes in air temperature with potential lag effects such as following sludge agitation. Modeled deposition corrections to adjust the concentration loss detected at the measurement point with the associated footprint were 22-28% of the total emissions and the cumulative fraction of deposition to emission modeled with distance from the source was between 7-12% for the measurement distances (60-150 m). Although estimates of depositional loss were plausible, the approach is still connected with substantial uncertainty, which calls for future validation measurements. Longer measurement periods encompassing more management activities and environmental conditions are required to assess predictor variable importance on emission dynamics. Combined, IDM with deposition correction will allow the determination of emission factors at reduced efforts and costs, thereby supporting the development and assessment of emission reducing methods and expand the data availability for emission inventories.Keywords
All Related Versions
Funding Information
- Swiss Federal Office for the Environment (Contract 00.5082.P2I R254-0652)
This publication has 91 references indexed in Scilit:
- Eddy covariance flux measurements of ammonia by high temperature chemical ionisation mass spectrometryAtmospheric Measurement Techniques, 2011
- Three-dimensional characterization of the ammonia plume from a beef cattle feedlotAtmospheric Environment, 2009
- Assessment of the backward Lagrangian Stochastic dispersion technique for continuous measurements of CH4 emissionsAgricultural and Forest Meteorology, 2009
- Quantifying Ammonia Emissions from a Cattle Feedlot using a Dispersion ModelJournal of Environmental Quality, 2007
- A coupled dispersion and exchange model for short-range dry deposition of atmospheric ammoniaQuarterly Journal of the Royal Meteorological Society, 2006
- SE—Structure and EnvironmentJournal of Agricultural Engineering Research, 2001
- Ammonia dry deposition over grassland‐micrometeorological flux‐gradient measurements and bidirectional flux calculations using an inferential modelQuarterly Journal of the Royal Meteorological Society, 2001
- Resistance modelling of ammonia exchange over oilseed rapeAgricultural and Forest Meteorology, 2000
- Development of resistance models to describe measurements of bi-directional ammonia surface–atmosphere exchangeAtmospheric Environment, 1998
- A variable-resolution transport model applied for NHχ in EuropeAtmospheric Environment. Part A. General Topics, 1992