Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications
- 2 August 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Kerntechnik
- Vol. 88 (5) , 543-555
Abstract
The present research aims to enhance heat transfer in straight and wavy profile heat sinks using the same length and hydraulic diameter with different microchannel geometries (triangular, rectangular, trapezoidal, semi-circular, and circular) for uses in electronics, inkjet printing, high heat flux cooling of lasers, and other domains. The nanofluid employed is water/aluminum oxide (water/Al2O3), and the flow regime is laminar. The range of Reynolds number (Re) in this study was 220 ≤ Re ≤ 550, and the concentrations of nanoparticle Al2O3 with Heavy Water (2H2O) were 1.2 % volume. This investigation uses 3-dimensional Computational Fluid Dynamics (CFD) simulation software to investigate the heat transfer characteristics of several cross-sectioned microchannels. The numerical investigation utilizes the finite volume approach, and the CFD analysis is validated with accessible literature with different wavy profiles. According to the CFD simulation results, the microchannel with a circular cross-section has the highest heat transfer performance (up to 18 %) among the other cross-sections. The circular cross-section microchannel seemed to have the most significant increase in coolant temperature (by 9–22 %). The analysis outcomes prove that the microchannel with a circular cross-section has the highest performance for heat transfer; the triangular channel has the lowest performance under the same geometric parameters and boundary conditions. So, it is suggested that a circular microchannel can be used for a heat-carrying capacity of 150 W/cm2, a hydraulic diameter of 500 µm, and a Reynolds number equal to 500.Keywords
This publication has 38 references indexed in Scilit:
- Comparative Study of Rectangular and Trapezoidal Microchannels Using Water and Liquid MetalProcedia Engineering, 2013
- Numerical Investigation of Heat Transfer in Rectangular Microchannels Under H2 Boundary Condition During Developing and Fully Developed Laminar FlowJournal of Heat Transfer, 2011
- Eulerian–Eulerian two-phase numerical simulation of nanofluid laminar forced convection in a microchannelInternational Journal of Heat and Fluid Flow, 2011
- Heat transfer in trapezoidal microchannels of various aspect ratiosInternational Journal of Heat and Mass Transfer, 2010
- Numerical investigation of nanofluids forced convection in circular tubesApplied Thermal Engineering, 2009
- Numerical investigation into the convective heat transfer of TiO2 nanofluids flowing through a straight tube under the laminar flow conditionsApplied Thermal Engineering, 2009
- Forced convective heat transfer of nanofluids in microchannelsInternational Journal of Heat and Mass Transfer, 2009
- Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling—Thermohydraulic Performance Enhancement and Fabrication TechnologyHeat Transfer Engineering, 2004
- Heat transfer for water flow in trapezoidal silicon microchannelsInternational Journal of Heat and Mass Transfer, 2000
- User's guide to safe computing : Laura Didio LAN Times, 14 September 1992, p. 1, 110 & 111.Computers & Security, 1992