AUTOMATION OF NANOPARTICLE SYNTHESIS PROCESSES IN A PLASMA ENVIRONMENT USING LABVIEW
- 27 June 2026
- journal article
- Published by Kazakh-British Technical University in Herald of the Kazakh-British technical university
- Vol. 23 (2)
Abstract
This work presents an automated control system for the synthesis of nanomaterials by plasma-enhanced chemical vapor deposition (PECVD), implemented using the LabVIEW software environment. The main objective of the study is to develop an integrated hardware-software platform that enables sequential control of the key stages of the PECVD process, including vacuum chamber preparation, pressure monitoring, working gas supply, plasma ignition, power matching, cyclic nanomaterial growth, and optical monitoring of nanoparticles in the plasma environment. The use of LabVIEW made it possible to integrate actuator control, experimental parameter acquisition, and realtime process visualization within a single automated system. The automated cycle begins with evacuation of the reaction chamber to a predefined base pressure. Transition to the next stage is permitted only after the specified pressure threshold has been reached, ensuring reproducible initial conditions for each experiment. The program then controls the supply of the working gas through mass flow controllers (MFCs). In this work, two gas-flow control modes were considered: analog control using a 0÷5 V voltage signal and digital communication via RS-232 interface. It was shown that the analog approach requires accurate scaling of the control voltage, since applying 5 V corresponds to full-scale opening of the controller and results in the maximum gas flow. In contrast, the RS232 interface enables the gas flow rate to be specified directly in sccm, improving the accuracy, flexibility, and convenience of gas-environment control. After pressure stabilization, LabVIEW initiates RF plasma ignition and executes the RF matching algorithm aimed at minimizing reflected power and improving the stability of the plasma process. A separate software module implements the cyclic nanomaterial growth mode, in which the plasma-on time, plasma duration, and total number of synthesis cycles are predefined. This approach makes it possible to control material accumulation on the substrate and to correlate the process parameters with the morphological characteristics of the resulting nanostructures. The final module of the system is designed for optical monitoring of the nanoparticle cloud density in dusty plasma. For this purpose, the change in the intensity of laser radiation passing through the plasma region is recorded using a photodetector and a Keithley 2401 measuring unit connected to LabVIEW via RS-232 interface. The difference between the initial and modified optical signal intensity is used as a diagnostic parameter characterizing the formation and temporal evolution of nanoparticles. The developed system demonstrates that LabVIEW can be effectively applied not only for the automation of individual instruments, but also for the implementation of a complete digital control cycle for PECVD-based nanomaterial synthesis.Keywords
This publication has 43 references indexed in Scilit:
- Fabricating durable and stable superhydrophobic coatings by the atmospheric pressure plasma polymerisation of hexamethyldisiloxaneHeliyon, 2023
- Achieving stable photodiode characteristics under ionizing radiation with a self-adaptive nanostructured heterojunction CNWs/CdZnTeCarbon, 2023
- Carbon nanoparticles characteristics synthesized in pulsed radiofrequency discharge and their effect on surface hydrophobicityContributions to Plasma Physics, 2022
- Real-time measurement device of RF impedance and power for HUST RF negative ion sourceFusion Engineering and Design, 2022
- An automated chemical vapor deposition setup for 2D materialsHardwareX, 2020
- Synthesis of carbon and copper nanoparticles in radio frequency plasma with additional electrostatic fieldContributions to Plasma Physics, 2018
- Pulsed PECVD for Low-temperature Growth of Vertically Aligned Carbon NanotubesChemical Vapor Deposition, 2014
- Plasma‐enhanced Chemical Vapor Deposition of Aluminum Oxide Using Ultrashort Precursor Injection PulsesPlasma Processes and Polymers, 2012
- Data acquisition and real-time signal processing of plasma diagnostics on ASDEX Upgrade using LabVIEW RTFusion Engineering and Design, 2010
- Boron doped amorphous carbon thin films grown by r.f. PECVD under different partial pressureDiamond and Related Materials, 2005