AUAlmasbek U. Utegenov

Almasbek U. Utegenov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Almasbek U. Utegenov has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Plasma–assisted methane activation using a nickel foam–supported nanostructured ZnO catalyst

    by Dias Ye. Yelubayev, Zhanserik Ye. Ongaibergenov, Aiymkul Markhabayeva, Almasbek U. Utegenov, Jiaqi Liu, Tao Liu, Tlekkabul S. Ramazanov, Bin Pan, Yerassyl Yerlanuly, Maratbek T. Gabdullin, et al.

  • Open Access

    Plasma-Assisted and Green Routes to Silicon and Carbon Quantum Dots: A Critical Comparison of Synthesis–Structure–Property Relationships

    by Sagi Orazbayev, Almasbek Utegenov, Assan Abdirakhmanov, Sultan Ussenkhan, Yerassyl Yerlanuly, Didar Batryshev, Moldir Nurusheva, Maratbek Gabdullin, Laifa Boufendi, Holger Vach, et al.

    Silicon quantum dots (SiQDs) and carbon quantum dots (CQDs) are often discussed as related heavy-metal-free luminescent nanomaterials, although the mechanisms governing their formation and emission differ fundamentally. Rather than combining two parallel bodies of literature, this review uses SiQDs and CQDs as contrasting model systems to determine which synthesis–structure–property relationships are transferable and which remain material-specific. We critically compare nonthermal gas-phase plasma, plasma–liquid, and solution-phase synthesis, including green routes, with respect to precursor activation, nucleation and growth, crystallinity, surface chemistry, purification, photoluminescence, reproducibility, and scalability. Low-pressure continuous-flow radio-frequency capacitively coupled plasma (RF-CCP) is treated as the reference plasma architecture for free-standing Si nanocrystals, while atmospheric-pressure and plasma–liquid approaches are discussed according to their distinct product forms, formation mechanisms, and technological maturity. For crystalline SiQDs, quantum confinement provides a physically defined framework for interpreting size-dependent optical behavior, although oxidation, ligands, and interfacial defects remain critical. In CQDs, emission may arise from carbon-core states, surface or defect states, and molecular fluorophores, making structural assignment and fraction-resolved characterization essential. Across both material families, reported record photoluminescence efficiencies are less informative for technological translation than reproducibility, purified product yield, long-term stability, and application-specific performance. Hybrid plasma–liquid processing, operando diagnostics, standardized optical characterization, and data-guided process optimization are identified as promising directions toward scalable and reproducible quantum-dot manufacturing.

  • Open Access

    Enhanced Plasma–Assisted Methane Conversion Using a Nickel Foam–Supported Nanostructured ZnO Catalyst

    by Dias Ye. Yelubayev, Zhanserik Ye. Ongaibergenov, Aiymkul Markhabayeva, Almasbek U. Utegenov, Jiaqi Liu, Tao Liu, Tlekkabul Ramazanov, Bin Pan, Yerassyl Yerlanuly, Maratbek Gabdullin, et al.

    Plasma catalysis offers a promising route for methane conversion by enhancing plasma–surface interactions through nanostructured catalysts. Here, methane conversion over nickel foam and ZnO nanorods grown on nickel foam was comparatively investigated in a low-pressure radio-frequency dielectric barrier discharge reactor at 0.5 Torr and 10–25 W. Optical emission spectroscopy of Ar/CH₄ plasma revealed CH, C₂ Swan bands, H₂, and Hα emissions, confirming methane dissociation. ZnO nanorods/Ni foam more strongly affected active plasma species than bare nickel foam, particularly at 25 W. Surface analyses showed that carbon deposits formed locally on nickel foam but were distributed more uniformly over ZnO nanorods/Ni foam, following the nanorod morphology. The deposited layer was amorphous, while the crystalline ZnO structure remained preserved. A 60 min test at 25 W, 0.5 Torr, and Ar 75 sccm + CH₄ 25 sccm demonstrated stable discharge operation and sustained plasma–surface interaction during long-term plasma-catalytic methane conversion under these conditions.

  • AUTOMATION OF NANOPARTICLE SYNTHESIS PROCESSES IN A PLASMA ENVIRONMENT USING LABVIEW

    by A. U. Utegenov, S. S. Ussenkhan, Ye. A. Ussenov, S. A. Orazbayev

    This work presents an automated control system for the synthesis of nanomaterials by plasma-enhanced chemical vapor deposition (PECVD), implemented using the LabVIEW software environment. The main objective of the study is to develop an integrated hardware-software platform that enables sequential control of the key stages of the PECVD process, including vacuum chamber preparation, pressure monitoring, working gas supply, plasma ignition, power matching, cyclic nanomaterial growth, and optical monitoring of nanoparticles in the plasma environment. The use of LabVIEW made it possible to integrate actuator control, experimental parameter acquisition, and realtime process visualization within a single automated system. The automated cycle begins with evacuation of the reaction chamber to a predefined base pressure. Transition to the next stage is permitted only after the specified pressure threshold has been reached, ensuring reproducible initial conditions for each experiment. The program then controls the supply of the working gas through mass flow controllers (MFCs). In this work, two gas-flow control modes were considered: analog control using a 0÷5 V voltage signal and digital communication via RS-232 interface. It was shown that the analog approach requires accurate scaling of the control voltage, since applying 5 V corresponds to full-scale opening of the controller and results in the maximum gas flow. In contrast, the RS232 interface enables the gas flow rate to be specified directly in sccm, improving the accuracy, flexibility, and convenience of gas-environment control. After pressure stabilization, LabVIEW initiates RF plasma ignition and executes the RF matching algorithm aimed at minimizing reflected power and improving the stability of the plasma process. A separate software module implements the cyclic nanomaterial growth mode, in which the plasma-on time, plasma duration, and total number of synthesis cycles are predefined. This approach makes it possible to control material accumulation on the substrate and to correlate the process parameters with the morphological characteristics of the resulting nanostructures. The final module of the system is designed for optical monitoring of the nanoparticle cloud density in dusty plasma. For this purpose, the change in the intensity of laser radiation passing through the plasma region is recorded using a photodetector and a Keithley 2401 measuring unit connected to LabVIEW via RS-232 interface. The difference between the initial and modified optical signal intensity is used as a diagnostic parameter characterizing the formation and temporal evolution of nanoparticles. The developed system demonstrates that LabVIEW can be effectively applied not only for the automation of individual instruments, but also for the implementation of a complete digital control cycle for PECVD-based nanomaterial synthesis.

  • Open Access

    PREPARATION OF TRANSPARENT SUPERHYDROPHOBIC COATINGS WITH ANTI-ICING, ANTI-FOGGING AND SELF-CLEANING PROPERTIES BY PLASMA POLYMERISATION AT ATMOSPHERIC PRESSURE

    by B.A. Kyrykbay, S.S. Ussenkhan, N.YE. Akhanova, A.U. Utegenov, M.T. Gabdullin, S.A. Orazbayev

    This study analyses the stability of superhydrophobic coatings produced by plasma polymerisation at atmospheric pressure using argon (Ar) as the base gas and hexamethyldisiloxane (HMDSO) as the precursor. The evaluation was aimed at determining the strength and durability of these coatings when exposed to various environmental factors such as fogging, anti-icing and temperature fluctuations. The superhydrophobic properties of the coatings were investigated by measuring contact angles and surface roughness values. The results show that the coatings obtained by the above mentioned method have significant water repellent property and retain their superhydrophobic characteristics for a long time. The results indicate that the combination of Ar and HMDSO in plasma polymerisation at atmospheric pressure is a promising approach to create stable and durable superhydrophobic surfaces suitable for various applications. The main focus is on the stability of coatings, their ability to resist icing and fogging. The study showed that the hydrophobic properties of the coatings can be improved by optimising the process parameters, resulting in coatings with a water contact angle of more than 154±2 degrees and high transparency of up to 98.5% in the visible range. The obtained results testify to the high efficiency of the proposed method of obtaining coatings, which opens up prospects for their application in various fields where high resistance and transparency to external influences are required. Keywords: plasma polymerization, atmospheric pressure, superhydrophobic coatings.

  • Open Access

    One‐Step Fabrication of Highly Transparent Superhydrophobic Coatings Via Atmospheric Pressure Radio Frequency Plasma Deposition

    by Sultan S. Ussenkhan, Baglan A. Kyrykbay, Almasbek U. Utegenov, Sagi A. Orazbayev, Assanali T. Sultanov, Maratbek T. Gabdullin, Tlekkabul S. Ramazanov, Yerassyl Yerlanuly

    This work investigates the influence of pulse frequency, precursor concentration, and linear substrate translation speed on the morphology, optical transparency, and wetting behaviour of coatings deposited by an atmospheric‐pressure radiofrequency (RF) plasma jet. Optimised conditions yield coatings that are highly transparent in the visible range while maintaining superhydrophobicity (water contact angle > 150°). The coatings exhibit high resistance to thermal treatment, UV irradiation, and organic solvents, as well as a pronounced self‐cleaning effect; however, the mechanical durability is currently limited under repeated tape peeling. In several cases, the relative optical transmittance exceeds 100% with respect to bare glass. This apparent enhancement is attributed to the anti‐reflective action of the nanostructured surface, consistent with reduced reflectance and angular redistribution of light, as supported by integrating‐sphere measurements of total transmittance and reflectance and by SCOUT thin‐film modeling. Photovoltaic validation on three independent silicon PV devices of different formats showed a consistent positive efficiency change, with an average relative gain of 3.58% across the tested devices. The atmospheric‐pressure RF plasma jet process is simple, environmentally benign, and compatible with roll‐to‐roll manufacturing, making it a promising route for large‐area transparent superhydrophobic and anti‐reflective coatings for photovoltaic and optoelectronic applications.

  • Open Access

    STUDY OF RF-DBD DISCHARGE IN AR/CH4 MIXTURE IN THE PRESENCE OF NICKEL FOAM AT LOW PRESSURE

    by D. Ye. Yelubayev, Z. Е. Ongaibergenov, A. U. Utegenov, Bin Pan, R. Ye. Zhumadilov, Д. Е. Елубаев, Ж. Е. Оңайбергенов

    This paper investigates the effect of nickel foam on the structure and properties of Radio-Frequency Dielectric Barrier Discharge (RF-DBD) in an Ar/CH4 mixture at a low pressure of 0.5 Torr. Experiments were conducted by varying the supplied power, gas flow, and distance between the catalyst and the RF electrode. It has been shown that an increase in plasma power and a change in CH4 gas flow in the presence of a catalyst leads to a noticeable shortening of the plasma glow length in a quartz tube. It was found that increasing the distance between the catalyst and the RF electrode reduces the ability to maintain plasma in the region downstream of the catalyst. The analysis of optical emission spectra revealed a decrease in the intensity of carbon-containing radicals, atomic and molecular hydrogen after the catalyst, which indicates its active participation in plasma-catalytic processes. Raman analysis confirmed the formation of amorphous carbon deposits on the nickel foam surface. It has been established that nickel foam not only modifies the structure of the RF-DBD discharge, but also significantly affects the distribution of active particles in the plasma, changing the conditions for plasma-catalytic reactions. The results obtained provide a deeper understanding of the mechanisms of interaction between low-temperature plasma and porous metal catalysts and can be used in the development of effective plasma-catalytic systems for the conversion of hydrocarbon gases.

  • Open Access

    Optical diagnostics of low-pressure RF-DBD Ar/CH₄ plasma: mapping electron temperature and density versus power, pressure, and gas flow

    by Dias Ye. Yelubayev, Zhanserik Ye. Ongaibergenov, Almasbek U. Utegenov, Sagi A. Orazbayev, Yerassyl Yerlanuly, Tlekkabul S. Ramazanov, Pan Bin, Maratbek T. Gabdullin, Rakhymzhan Ye. Zhumadilov

    This paper presents an experimental study of an RF-DBD plasma, establishing how variations in operational parameters affect its characteristics and discharge behavior. The study identified the optimal parameters for plasma ignition – including pressure, applied power, and gas flow rate – and quantified their influence on key plasma characteristics, namely electron temperature, electron density, and Hα emission intensity as an optical indicator of hydrogen-containing species. Emission spectroscopy was employed to characterize the argon and argon-methane plasmas, with particular attention paid to the hydrogen Hα line (656.2 nm) in the mixture. For argon plasma, the electron temperature increased from ~ 0.98 eV to ~ 1.08 eV as the pressure was raised from 0.5 to 1.0 Torr at a constant discharge power of 4 W. Under the same pressure and power conditions, the electron temperature for an argon-methane plasma was approximately ~ 1.2 eV. A further increase in both power and gas flow rate leads to a decrease in electron temperature. Concurrently, the electron density was found to be on the order of 1014– 1015 m− 3. Material properties were examined using scanning electron microscopy (SEM) for morphology and Raman spectroscopy for structural analysis and defect characterization. The deposited carbon-based materials – films on the RF electrode and particles on the reactor wall – exhibited an amorphous structure. These findings elucidate the fundamental relationship between plasma parameters and gas conversion efficiency, providing a valuable framework for the controlled hydrogen production for energy applications.


  • Open Access

    Spectral characteristics of argon and argon-methane plasma obtained in an RF-DBD reactor at low pressure

    by R.YE. Zhumadilov, D.YE. Yelubayev, Z.е. Ongaibergenov, A.U. Utegenov

    This paper investigates the properties and spectral characteristics of low-temperature argon plasma and argon-methane mixture plasma formed in a high-frequency dielectric barrier discharge (RF-DBD) at various powers and pressures. The experiments were conducted at an argon flow rate of 100 sccm for argon plasma and at a ratio of Ar:CH₄ = 95:5 for argon-methane plasma in the power range from 2 to 12 W and pressures of 0.5 and 1.0 Torr. It is shown that with an increase in the supplied power, the discharge area expands and the intensity of spectral lines increases, which is due to an increase in plasma density and the degree of ionisation. When the pressure increases, there is a decrease in the overall intensity of radiation due to a reduction in the free path length of electrons and an increase in collision losses. The introduction of methane leads to a decrease in the intensity of the spectral lines of molecular nitrogen and hydroxyl radicals (OH) compared to argon plasma, which indicates a redistribution of electron energy in favour of the excitation of argon atoms and active methane particles. The results obtained contribute to a deeper understanding of the physicochemical processes in Ar–CH₄ plasma and open up prospects for the application of RF-DBD discharges in plasma chemistry and materials science.

  • Open Access

    Plasma treatment for producing hydrophobic and hydrophilic coatings on Fabric Surfaces

    by Baglan Kyrykbay, Sultan Ussenkhan, Zhanseriк Onaibergenov, Nazym Akhanova, Almasbek Utegenov, Sagi Orazbayev

    This study investigates methods for forming hydrophilic and superhydrophobic surfaces using plasma jets at atmospheric pressure. The primary focus is on ensuring the waterproofing of fabrics by creating superhydrophobic coatings. The influence of plasma on the structural and chemical characteristics of the treated materials was analyzed, along with the impact of key technological parameters, including discharge power and the composition of the plasma-forming gas. In the experiments, argon (Ar) was used as the main gas flow, while hexamethyldisiloxane (HMDSO) vapor served as the precursor. The hydrophilic properties of the surface were examined after one and ten treatment cycles using plasma in an argon flow at a rate of 40 mL/s with a power of 200 W under atmospheric pressure. The experimental parameters for the formation of the superhydrophobic coating included a discharge power of 200 W, an Ar flow rate of 40 mL/s, and a gas mixture flow rate of Ar + HMDSO at 20 mL/min. After plasma treatment, the contact angle was measured to evaluate changes in surface hydrophilicity and superhydrophobicity depending on the treatment parameters.The results confirmed the effectiveness of plasma modification for controlling the hydrophobic properties of materials. Furthermore, the stability of the coatings in contact with various liquids was investigated.