Abstract
The article considers the specifics of reduced rigidity impact of damaged structures on the main dynamic characteristics of the structural system using the example of a reinforced concrete residential building for the further development of recommendations for planning dynamic monitoring of the technical condition of similar buildings. A dynamic calculation was performed for a building with a cohesive monolithic reinforced concrete frame with 10 above-ground floors and standard architectural, planning, and structural solutions for earthquake-resistant buildings. Considering that the impact of damage to individual structures (including individual sections of walls) on the dynamic characteristics of the building as a whole is, as a rule, insignificant, to assess the impact of damage at different levels (floors) of the structural system, their distribution was assumed for all wall structures (diaphragms) within one floor. It has been found that the greatest effectiveness of dynamic monitoring using the “free vibration” method for residential and public buildings can be achieved when determining significant areas of damage to load-bearing structures that significantly affect the overall rigidity of the structural system at the lower height levels of the system (base and foundation, lower floors of the building). At the same time, provided that the equipment has sufficient accuracy and resolution in terms of the energy and amplitude of free vibrations of the structure, the parameters of the second mode of vibrations should be determined, which can provide a significantly larger amount of data on the spread and intensity of damage along the height of the building. From an applied point of view, the following main areas of wide use of dynamic monitoring by the “free vibration” method for residential and public buildings have been identified: for structures under dynamic loads that cause damage and deformation of load-bearing structures; detection of significant weakening of large sections of the “base-foundation” system; assessment of the impact of significant uneven deformations of the foundation on load-bearing structures; in general (regardless of the characteristics of loads and influences), to identify significant areas of structural damage that significantly affect the overall rigidity of the structural system at the level of the lower floors