Mykhailo Bozhynskyi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mykhailo Bozhynskyi has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Denys Khokhlin4 shared publications
- Vladyslav Basanskyi
SE «Research Institute of Construction Production named after V.S. Balytsky
3 shared publications - Andrii Kozak
Kyiv National University of Construction and Architecture
1 shared publication D.S. Yalovyi
Association of Alternative Electric and Hydrogen Energy, Kyiv
1 shared publication- Dmytro Prusov
Kyiv National University of Construction and Architecture
1 shared publication G.O. Kravchenko
Association of Alternative Electric and Hydrogen Energy, Kyiv
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Using the finite element method to determine the possibility of application and improvement of organizational and technological solutions for localization of destroyments caused by influences not foreseeed during design
The article examines the impact of off-design loads on the structures of an industrial building that was damaged but retained its overall stability. The generalized predictive and computational model is considered as a simplified transition from the physical system of an industrial building to a mathematical model used to assess the current state of structures and predict the possible development of damage. An effective approach to building such a model involves the use of the finite element method (FEM), which allows for the formalization of complex spatial systems by dividing them into components of simple geometry. The predictive and computational model, built based on FEM, provides the ability not only to analyze the current state of damaged structures, but also to predict their further behavior under the influence of variable loading conditions. This allows it to be used as a tool for making informed technical decisions in the process of eliminating the consequences of off-design impacts. An algorithmic sequence of actions for building an information and mathematical predictive and calculation model (using the example of a reinforced concrete truss of an industrial structure) in the environment of a calculation complex is proposed, which allows assessing the change in the technical condition of structural elements after the action of an off-design impact. An example of a corresponding calculation of a predictive and calculation model of a truss with a span of 24 m is given, the main tasks of which were: checking the absence of general destruction of its structure in the event of loss of an element at different stages of temporary reinforcement using an assembly platform and steel risers; determining the efficiency of unloading a damaged truss with this reinforcement, taking into account the limitation of the total allowable load transmitted by the risers to the assembly platform. A significant advantage (in the required total effort in the unloading risers) of the one-rise variant compared to two was found. This advantage increases from approximately 5% to 3 times when changing the location of the missing truss element from the edge to the middle of the truss. The planned level of truss unloading can be fully achieved with the use of a single riser for two of the four damage patterns and 88% for the other two. The options using 2 risers are significantly less effective (33-85% of the planned level of unloading). No cases of total truss failure were identified for any option and at any stage of the calculation.
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Strength of Materials and Theory of Structures
- No. 116
Open AccessUsing the finite element method to determine the possibility of application and improvement of organizational and technological solutions for localization of destroyments caused by influences not foreseeed during design
The article examines the impact of off-design loads on the structures of an industrial building that was damaged but retained its overall stability. The generalized predictive and computational model is considered as a simplified transition from the physical system of an industrial building to a mathematical model used to assess the current state of structures and predict the possible development of damage. An effective approach to building such a model involves the use of the finite element method (FEM), which allows for the formalization of complex spatial systems by dividing them into components of simple geometry. The predictive and computational model, built based on FEM, provides the ability not only to analyze the current state of damaged structures, but also to predict their further behavior under the influence of variable loading conditions. This allows it to be used as a tool for making informed technical decisions in the process of eliminating the consequences of off-design impacts. An algorithmic sequence of actions for building an information and mathematical predictive and calculation model (using the example of a reinforced concrete truss of an industrial structure) in the environment of a calculation complex is proposed, which allows assessing the change in the technical condition of structural elements after the action of an off-design impact. An example of a corresponding calculation of a predictive and calculation model of a truss with a span of 24 m is given, the main tasks of which were: checking the absence of general destruction of its structure in the event of loss of an element at different stages of temporary reinforcement using an assembly platform and steel risers; determining the efficiency of unloading a damaged truss with this reinforcement, taking into account the limitation of the total allowable load transmitted by the risers to the assembly platform. A significant advantage (in the required total effort in the unloading risers) of the one-rise variant compared to two was found. This advantage increases from approximately 5% to 3 times when changing the location of the missing truss element from the edge to the middle of the truss. The planned level of truss unloading can be fully achieved with the use of a single riser for two of the four damage patterns and 88% for the other two. The options using 2 risers are significantly less effective (33-85% of the planned level of unloading). No cases of total truss failure were identified for any option and at any stage of the calculation.
- Open Access
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
Impact of reduced rigidity of damaged structures on the main dynamic characteristics of reinforced concrete residential building
The article considers the specifics of reduced rigidity impact of damaged structures on the main dynamic characteristics of the structural system using the example of a reinforced concrete residential building for the further development of recommendations for planning dynamic monitoring of the technical condition of similar buildings. A dynamic calculation was performed for a building with a cohesive monolithic reinforced concrete frame with 10 above-ground floors and standard architectural, planning, and structural solutions for earthquake-resistant buildings. Considering that the impact of damage to individual structures (including individual sections of walls) on the dynamic characteristics of the building as a whole is, as a rule, insignificant, to assess the impact of damage at different levels (floors) of the structural system, their distribution was assumed for all wall structures (diaphragms) within one floor. It has been found that the greatest effectiveness of dynamic monitoring using the “free vibration” method for residential and public buildings can be achieved when determining significant areas of damage to load-bearing structures that significantly affect the overall rigidity of the structural system at the lower height levels of the system (base and foundation, lower floors of the building). At the same time, provided that the equipment has sufficient accuracy and resolution in terms of the energy and amplitude of free vibrations of the structure, the parameters of the second mode of vibrations should be determined, which can provide a significantly larger amount of data on the spread and intensity of damage along the height of the building. From an applied point of view, the following main areas of wide use of dynamic monitoring by the “free vibration” method for residential and public buildings have been identified: for structures under dynamic loads that cause damage and deformation of load-bearing structures; detection of significant weakening of large sections of the “base-foundation” system; assessment of the impact of significant uneven deformations of the foundation on load-bearing structures; in general (regardless of the characteristics of loads and influences), to identify significant areas of structural damage that significantly affect the overall rigidity of the structural system at the level of the lower floors
- 28 May 2026
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 18
Open AccessImpact of reduced rigidity of damaged structures on the main dynamic characteristics of reinforced concrete residential building
The article considers the specifics of reduced rigidity impact of damaged structures on the main dynamic characteristics of the structural system using the example of a reinforced concrete residential building for the further development of recommendations for planning dynamic monitoring of the technical condition of similar buildings. A dynamic calculation was performed for a building with a cohesive monolithic reinforced concrete frame with 10 above-ground floors and standard architectural, planning, and structural solutions for earthquake-resistant buildings. Considering that the impact of damage to individual structures (including individual sections of walls) on the dynamic characteristics of the building as a whole is, as a rule, insignificant, to assess the impact of damage at different levels (floors) of the structural system, their distribution was assumed for all wall structures (diaphragms) within one floor. It has been found that the greatest effectiveness of dynamic monitoring using the “free vibration” method for residential and public buildings can be achieved when determining significant areas of damage to load-bearing structures that significantly affect the overall rigidity of the structural system at the lower height levels of the system (base and foundation, lower floors of the building). At the same time, provided that the equipment has sufficient accuracy and resolution in terms of the energy and amplitude of free vibrations of the structure, the parameters of the second mode of vibrations should be determined, which can provide a significantly larger amount of data on the spread and intensity of damage along the height of the building. From an applied point of view, the following main areas of wide use of dynamic monitoring by the “free vibration” method for residential and public buildings have been identified: for structures under dynamic loads that cause damage and deformation of load-bearing structures; detection of significant weakening of large sections of the “base-foundation” system; assessment of the impact of significant uneven deformations of the foundation on load-bearing structures; in general (regardless of the characteristics of loads and influences), to identify significant areas of structural damage that significantly affect the overall rigidity of the structural system at the level of the lower floors
- Open Access
- 28 May 2026
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 82,p. 107-113
ASPECTS OF IMPLEMENTING ASH AND SLAG WASTE FROM W2E ENTERPRISES INTO THE PRODUCTION OF CONCRETE PRODUCTS
Problem. The article addresses the issue of incorporating ash and slag waste from Waste-to-Energy (W2E) facilities, generated during the incineration of municipal solid waste, into the production of concrete products. The relevance of the study is determined by the increasing volume of waste, the need to reduce landfilling, the shortage of natural raw materials, the necessity of environmental modernization in construction, and the formation of an additional resource base for the recovery of Ukraine. Methodology. The study was carried out through the generalization of international experience in the use of MSWI/W2E bottom ash and fly ash in concrete and cementitious materials, comparison of their chemical composition with Portland cement, and assessment of technological, environmental, and regulatory limitations. Methods for determining pozzolanic activity, controlling hydrogen release, assessing volume stability, and evaluating the leaching of hazardous components were considered. Results. It was established that W2E ash and slag may be used as a partial replacement for cement or natural aggregates after appropriate additional preparation of the material for practical application. It was shown that the rational dosage of such materials can contribute to the densification of the cement stone structure, increase chemical resistance, reduce permeability, and improve durability. At the same time, the presence of chlorides, sulfates, heavy metals, and metallic aluminum requires mandatory laboratory control. Originality. The study systematizes international experience in the use of W2E ash and slag residues with regard to the possibilities of their adaptation to the conditions of Ukraine. A staged research framework is proposed, covering raw material certification, testing of concrete products, and pilot implementation. Practical value. The results may be used for the development of technological regulations for the production of paving slabs, curbstones, road base materials, wall blocks, non-pressure concrete pipes, and geopolymer materials containing W2E ash. The proposed approach will contribute to reducing construction costs, decreasing the consumption of natural resources, and forming a raw material base for the recovery of Ukraine’s infrastructure.
- 28 May 2026
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 82,p. 107-113
Open AccessASPECTS OF IMPLEMENTING ASH AND SLAG WASTE FROM W2E ENTERPRISES INTO THE PRODUCTION OF CONCRETE PRODUCTS
Problem. The article addresses the issue of incorporating ash and slag waste from Waste-to-Energy (W2E) facilities, generated during the incineration of municipal solid waste, into the production of concrete products. The relevance of the study is determined by the increasing volume of waste, the need to reduce landfilling, the shortage of natural raw materials, the necessity of environmental modernization in construction, and the formation of an additional resource base for the recovery of Ukraine. Methodology. The study was carried out through the generalization of international experience in the use of MSWI/W2E bottom ash and fly ash in concrete and cementitious materials, comparison of their chemical composition with Portland cement, and assessment of technological, environmental, and regulatory limitations. Methods for determining pozzolanic activity, controlling hydrogen release, assessing volume stability, and evaluating the leaching of hazardous components were considered. Results. It was established that W2E ash and slag may be used as a partial replacement for cement or natural aggregates after appropriate additional preparation of the material for practical application. It was shown that the rational dosage of such materials can contribute to the densification of the cement stone structure, increase chemical resistance, reduce permeability, and improve durability. At the same time, the presence of chlorides, sulfates, heavy metals, and metallic aluminum requires mandatory laboratory control. Originality. The study systematizes international experience in the use of W2E ash and slag residues with regard to the possibilities of their adaptation to the conditions of Ukraine. A staged research framework is proposed, covering raw material certification, testing of concrete products, and pilot implementation. Practical value. The results may be used for the development of technological regulations for the production of paving slabs, curbstones, road base materials, wall blocks, non-pressure concrete pipes, and geopolymer materials containing W2E ash. The proposed approach will contribute to reducing construction costs, decreasing the consumption of natural resources, and forming a raw material base for the recovery of Ukraine’s infrastructure.
- Open Access
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
METHODOLOGY FOR VIBRATION MONITORING OF RESIDENTIAL AND PUBLIC BUILDINGS FOR THE PURPOSE OF ASSESSING THEIR TECHNICAL CONDITION
A generalization of the existing basic standards allows us to identify three stages of each ite-ration of vibration monitoring: preparation; measurement; processing and analysis of results with the preparation of a report or other documentation. The components of vibration monitoring using the “free vibration” method for residential and public buildings, considering their specific features, are conside-red. At the same time, the nuances of the first test (monitoring iteration) for a structure, which is the basis for all subsequent ones, are highlighted. It is determined that the main objective of the first stage (preparation) is to create or correct a dynamic model of the building under study and obtain the results of its modal analysis, considering the effect of low intensity microseismic vibrations and determining or correcting the test parameters. The measurements themselves should provide experimental data (actual dynamic characteristics of the building), which will be the basis for further analysis, correction of the dynamic model, and assessment of the technical condition and its dynamics. It is noted that after pro-cessing and analyzing the results of calculations and measurements, it may be necessary to carry out additional clarifying work (investigation or measurements) to obtain additional data and identify possible causes of significant differences in the results of calculations and measurements. The features of dynamic tests of residential and public buildings are highlighted. A brief example of an iteration of vibration monitoring carried out with the participation of the authors for a masonry residential building that was impacted during operation by significant uneven deformations of the basement, primarily associated with new building work nearby, is provided. The data obtained confirmed the presence of sig-nificant damage to the wall structures in the longitudinal direction of the building and the absence of significant weakening of the structures in the transverse direction.
- 1 December 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 81
Open AccessMETHODOLOGY FOR VIBRATION MONITORING OF RESIDENTIAL AND PUBLIC BUILDINGS FOR THE PURPOSE OF ASSESSING THEIR TECHNICAL CONDITION
A generalization of the existing basic standards allows us to identify three stages of each ite-ration of vibration monitoring: preparation; measurement; processing and analysis of results with the preparation of a report or other documentation. The components of vibration monitoring using the “free vibration” method for residential and public buildings, considering their specific features, are conside-red. At the same time, the nuances of the first test (monitoring iteration) for a structure, which is the basis for all subsequent ones, are highlighted. It is determined that the main objective of the first stage (preparation) is to create or correct a dynamic model of the building under study and obtain the results of its modal analysis, considering the effect of low intensity microseismic vibrations and determining or correcting the test parameters. The measurements themselves should provide experimental data (actual dynamic characteristics of the building), which will be the basis for further analysis, correction of the dynamic model, and assessment of the technical condition and its dynamics. It is noted that after pro-cessing and analyzing the results of calculations and measurements, it may be necessary to carry out additional clarifying work (investigation or measurements) to obtain additional data and identify possible causes of significant differences in the results of calculations and measurements. The features of dynamic tests of residential and public buildings are highlighted. A brief example of an iteration of vibration monitoring carried out with the participation of the authors for a masonry residential building that was impacted during operation by significant uneven deformations of the basement, primarily associated with new building work nearby, is provided. The data obtained confirmed the presence of sig-nificant damage to the wall structures in the longitudinal direction of the building and the absence of significant weakening of the structures in the transverse direction.
- Open Access
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Evaluation of alternative organizational and technological solutions for temporary supporting damaged structures based on multi-criterion decision-making methods
The article addresses the problem of improving organizational and technological solutions for temporary shoring of damaged structures in cases of accidental failures caused by impacts not anticipated at the design stage. It emphasizes that timely and efficient temporary shoring is a critically important stage that ensures the structural stability of a building prior to the implementation of permanent repair works. Traditional approaches to the selection of technologies have predominantly relied on single-factor technical inspections, which do not fully account for the complexity, contradictions, and multi-criteria nature of the task. At the same time, recent scientific developments in the field of construction demonstrate a transition towards the application of multi-criteria decision-making (MCDM) methods, which make it possible to develop transparent, well-founded, and reproducible selection algorithms. The aim of the study is to test the potential of MCDM for assessing alternative methods of temporary shoring and identifying the most effective solutions considering technical, organizational, and technological factors. The paper proposes a hierarchical structure of criteria covering more than forty parameters, characterizing safety, cost, duration, resource availability, degree of mechanization, and logistical constraints. Particular attention is given to the methods of determining the weights of criteria, ranging from classical pairwise comparison procedures (AHP) to group expert evaluations with consistency verification. For further ranking of alternatives, the TOPSIS method was applied, enabling the assessment of the relative closeness of actual shoring alternatives to the ideal solution. The practical value of the research lies in the application of the proposed methodology to four real-world scenarios of temporary shoring of damaged reinforced concrete roof structures of industrial buildings. The analysis of results demonstrated that the most effective option is the combination of using a mounting platform with an information-mathematical system for optimizing the shoring process, which minimizes enterprise downtime and enhances the reliability of construction works. The study also applied fuzzy evaluations and linguistic scales to incorporate qualitative parameters, which strengthen the adaptability of the approach under conditions of uncertainty. The conclusions emphasize that the integration of AHP and TOPSIS provides an effective toolkit for developing well-substantiated decisions in the field of emergency construction. The methodology can be applied to standardize decision-making processes in emergency situations, to prepare methodological guidelines for construction organizations, and to develop specialized software tools for engineering decision support. The results confirm the potential of multi-criteria methods for optimizing organizational and technological solutions aimed at eliminating the consequences of accidental structural failures, thereby improving the efficiency and safety of construction processes.
- 25 November 2025
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 1 (56)
Open AccessEvaluation of alternative organizational and technological solutions for temporary supporting damaged structures based on multi-criterion decision-making methods
The article addresses the problem of improving organizational and technological solutions for temporary shoring of damaged structures in cases of accidental failures caused by impacts not anticipated at the design stage. It emphasizes that timely and efficient temporary shoring is a critically important stage that ensures the structural stability of a building prior to the implementation of permanent repair works. Traditional approaches to the selection of technologies have predominantly relied on single-factor technical inspections, which do not fully account for the complexity, contradictions, and multi-criteria nature of the task. At the same time, recent scientific developments in the field of construction demonstrate a transition towards the application of multi-criteria decision-making (MCDM) methods, which make it possible to develop transparent, well-founded, and reproducible selection algorithms. The aim of the study is to test the potential of MCDM for assessing alternative methods of temporary shoring and identifying the most effective solutions considering technical, organizational, and technological factors. The paper proposes a hierarchical structure of criteria covering more than forty parameters, characterizing safety, cost, duration, resource availability, degree of mechanization, and logistical constraints. Particular attention is given to the methods of determining the weights of criteria, ranging from classical pairwise comparison procedures (AHP) to group expert evaluations with consistency verification. For further ranking of alternatives, the TOPSIS method was applied, enabling the assessment of the relative closeness of actual shoring alternatives to the ideal solution. The practical value of the research lies in the application of the proposed methodology to four real-world scenarios of temporary shoring of damaged reinforced concrete roof structures of industrial buildings. The analysis of results demonstrated that the most effective option is the combination of using a mounting platform with an information-mathematical system for optimizing the shoring process, which minimizes enterprise downtime and enhances the reliability of construction works. The study also applied fuzzy evaluations and linguistic scales to incorporate qualitative parameters, which strengthen the adaptability of the approach under conditions of uncertainty. The conclusions emphasize that the integration of AHP and TOPSIS provides an effective toolkit for developing well-substantiated decisions in the field of emergency construction. The methodology can be applied to standardize decision-making processes in emergency situations, to prepare methodological guidelines for construction organizations, and to develop specialized software tools for engineering decision support. The results confirm the potential of multi-criteria methods for optimizing organizational and technological solutions aimed at eliminating the consequences of accidental structural failures, thereby improving the efficiency and safety of construction processes.
- Open Access
- 1 October 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 80
BUILDING STRUCTURES UNDER SEISMIC LOADS AND SIGNIFICANT UNEVEN BASE DEFORMATIONS
The article summarizes the results of research on the study of the specifics on the sequential combined effects of significant differential foundation settlements of various origins and seismic loads on reinforced concrete and masonry buildings, as well as on the development of corresponding analyti-cal methods and structural protection systems. The main results of the conducted studies include: a pro-posed methodology for determining the foundation stiffness amplification coefficient for dynamic cal-culations; identification of specific aspects of accounting for the foundation behavior in dynamic ana-lyses of masonry and other rigid buildings without constructing a finite-element soil model; development of recommendations for dynamic analysis to reproduce the experimentally measured dynamic charac-teristics of buildings under microseismic excitations; determination of the main effects of substantial differential foundation settlements on the natural vibration periods, stress–strain state, and seismic resistance of structural systems; advancement of static nonlinear analysis for seismic effects using the load-bearing capacity spectrum (LCS) method; and a methodology for assessing structural systems under the sequential action of DDFS and seismic loads based on nonlinear analysis by the LCS method. Furthermore, a general protection system for both new and existing buildings under complex engineering and geological conditions has been developed. It has been established that further improvement is required for efficient time-integration computatio-nal methods capable of modeling building structures and their soil foundations as a detailed nonlinear finite-element (FE) array. Such methods should simultaneously account for the nonlinear behavior of the soil mass, through which seismic waves propagate, and the nonlinear response of the structural system, while also ensuring a justified simplification of these calculations.
- 1 October 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 80
Open AccessBUILDING STRUCTURES UNDER SEISMIC LOADS AND SIGNIFICANT UNEVEN BASE DEFORMATIONS
The article summarizes the results of research on the study of the specifics on the sequential combined effects of significant differential foundation settlements of various origins and seismic loads on reinforced concrete and masonry buildings, as well as on the development of corresponding analyti-cal methods and structural protection systems. The main results of the conducted studies include: a pro-posed methodology for determining the foundation stiffness amplification coefficient for dynamic cal-culations; identification of specific aspects of accounting for the foundation behavior in dynamic ana-lyses of masonry and other rigid buildings without constructing a finite-element soil model; development of recommendations for dynamic analysis to reproduce the experimentally measured dynamic charac-teristics of buildings under microseismic excitations; determination of the main effects of substantial differential foundation settlements on the natural vibration periods, stress–strain state, and seismic resistance of structural systems; advancement of static nonlinear analysis for seismic effects using the load-bearing capacity spectrum (LCS) method; and a methodology for assessing structural systems under the sequential action of DDFS and seismic loads based on nonlinear analysis by the LCS method. Furthermore, a general protection system for both new and existing buildings under complex engineering and geological conditions has been developed. It has been established that further improvement is required for efficient time-integration computatio-nal methods capable of modeling building structures and their soil foundations as a detailed nonlinear finite-element (FE) array. Such methods should simultaneously account for the nonlinear behavior of the soil mass, through which seismic waves propagate, and the nonlinear response of the structural system, while also ensuring a justified simplification of these calculations.
- Open Access
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 35-41
ESTIMATING THE DURATION OF SCENARIOS FOR ELIMINATING EMERGENCY DESTRUCTION OF BUILDING STRUCTURES USING THE PERT METHOD WITH THE USE OF AN INFORMATION AND MATHEMATICAL OPTIMIZATION SYSTEM
The article examines the application of the PERT method (Program Evaluation and Review Technique) for expert-based duration assessment in analyzing alternative scenarios for eliminating the consequences of emergency structural failures. The study focuses on selecting the optimal organizational and technological solution for restoring damaged critical infrastructure under conditions of time constraints, uncertainty, and limited initial information. The PERT method, based on three-point time estimates (optimistic, most likely, and pessimistic), enables modeling of the time boundaries for each stage of emergency recovery operations. The study proposes and analyzes four scenarios: the use of traditional scaffolding, a scissor lift, a modular assembly platform, and a modular platform integrated with an Information and Mathematical Strengthening Optimization System (IMSOS). For each scenario, expert evaluation was conducted for the duration of nine key stages of the emergency recovery process, considering access to damaged structures, selection of support elements, execution of temporary reinforcement, and organization of deformation monitoring. The results of the comparative analysis demonstrated that the scenario involving the modular platform combined with IMSOS is the most effective in terms of minimizing the total project duration. The proposed approach allows engineers and project teams to quickly adapt organizational and technological decisions to emergency conditions, reduce the risk of delays, and ensure timely restoration of structural functionality.
- 1 August 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 79,p. 35-41
Open AccessESTIMATING THE DURATION OF SCENARIOS FOR ELIMINATING EMERGENCY DESTRUCTION OF BUILDING STRUCTURES USING THE PERT METHOD WITH THE USE OF AN INFORMATION AND MATHEMATICAL OPTIMIZATION SYSTEM
The article examines the application of the PERT method (Program Evaluation and Review Technique) for expert-based duration assessment in analyzing alternative scenarios for eliminating the consequences of emergency structural failures. The study focuses on selecting the optimal organizational and technological solution for restoring damaged critical infrastructure under conditions of time constraints, uncertainty, and limited initial information. The PERT method, based on three-point time estimates (optimistic, most likely, and pessimistic), enables modeling of the time boundaries for each stage of emergency recovery operations. The study proposes and analyzes four scenarios: the use of traditional scaffolding, a scissor lift, a modular assembly platform, and a modular platform integrated with an Information and Mathematical Strengthening Optimization System (IMSOS). For each scenario, expert evaluation was conducted for the duration of nine key stages of the emergency recovery process, considering access to damaged structures, selection of support elements, execution of temporary reinforcement, and organization of deformation monitoring. The results of the comparative analysis demonstrated that the scenario involving the modular platform combined with IMSOS is the most effective in terms of minimizing the total project duration. The proposed approach allows engineers and project teams to quickly adapt organizational and technological decisions to emergency conditions, reduce the risk of delays, and ensure timely restoration of structural functionality.
- Open Access
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 132-139
IMPLEMENTATION OF MODULES OF THE INFORMATION AND MATHEMATICAL SYSTEM FOR OPTIMIZATION OF REINFORCEMENT WITH THE INTEGRATION OF EXISTING DATABASES TO ACCELERATE THE ADOPTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS TO ELIMINATE THE CONSEQUENCES CAUSED
In order to eliminate contradictions between existing regulatory documents and regulated procedures for the operational elimination of the consequences of emergency destruction of prefabricated reinforced concrete frame structures of industrial buildings caused by influences not foreseen during design, by systematizing domestic and foreign experience in eliminating the consequences of accidents, which includes emergency rescue operations, temporary shoring, and decision-making on strengthening and restoring buildings, the article considers the universal modular structure of organizational and technological solutions created by the author, which describes the interconnected sequence of basic processes from object identification to the formation of a report with the optimal scenario for eliminating damage.At the same time, it is expected that the system will become a tool for software and technical support for a surveyor engineer, designer or project manager from the moment of initial recording of the accident to the decision on the final strengthening or restoration of the building.Using the system allows you to reduce the time for deciding and prevent minor errors due to the presence of verified databases for structural defects and methods for their restoration, which will significantly reduce the impact of the human factor. However, at the first stages, it is necessary to validate the solutions obtained from the system to check their reliability, and later to verify the facts issued from the supplemented databases by users. The system will help compile the results of the work of experts from various construction industries (designers, technical inspection experts, technologists, etc.) into one consolidated information extract to improve the perception of information by the customer, which will contribute to greater customer confidence in the proposed solutions due to their mandatory prior validation. The presented information and mathematical system should provide a single digital space for quick and informed decision-making at all stages of the elimination and localization of the development of destruction using separate operating modules, which allows you to supplement the system with new additional modules and, if necessary, change existing ones. The main task of users will be to fill in the databases.
- 26 February 2025
- Published by Building Production, State Enterprise 'V.Balytskyi Scientific Research Institute of Building Production (SE 'NDIBV') in Building production
- No. 78,p. 132-139
Open AccessIMPLEMENTATION OF MODULES OF THE INFORMATION AND MATHEMATICAL SYSTEM FOR OPTIMIZATION OF REINFORCEMENT WITH THE INTEGRATION OF EXISTING DATABASES TO ACCELERATE THE ADOPTION OF ORGANIZATIONAL AND TECHNOLOGICAL DECISIONS TO ELIMINATE THE CONSEQUENCES CAUSED
In order to eliminate contradictions between existing regulatory documents and regulated procedures for the operational elimination of the consequences of emergency destruction of prefabricated reinforced concrete frame structures of industrial buildings caused by influences not foreseen during design, by systematizing domestic and foreign experience in eliminating the consequences of accidents, which includes emergency rescue operations, temporary shoring, and decision-making on strengthening and restoring buildings, the article considers the universal modular structure of organizational and technological solutions created by the author, which describes the interconnected sequence of basic processes from object identification to the formation of a report with the optimal scenario for eliminating damage.At the same time, it is expected that the system will become a tool for software and technical support for a surveyor engineer, designer or project manager from the moment of initial recording of the accident to the decision on the final strengthening or restoration of the building.Using the system allows you to reduce the time for deciding and prevent minor errors due to the presence of verified databases for structural defects and methods for their restoration, which will significantly reduce the impact of the human factor. However, at the first stages, it is necessary to validate the solutions obtained from the system to check their reliability, and later to verify the facts issued from the supplemented databases by users. The system will help compile the results of the work of experts from various construction industries (designers, technical inspection experts, technologists, etc.) into one consolidated information extract to improve the perception of information by the customer, which will contribute to greater customer confidence in the proposed solutions due to their mandatory prior validation. The presented information and mathematical system should provide a single digital space for quick and informed decision-making at all stages of the elimination and localization of the development of destruction using separate operating modules, which allows you to supplement the system with new additional modules and, if necessary, change existing ones. The main task of users will be to fill in the databases.
- Open Access
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (54) , 380-394
Models and methods for assessing spatial parameters of investment projects and urban reconstruction programs
Modern processes of reconstruction of Ukrainian cities are taking place in conditions of significant socio-economic transformations caused by the consequences of war destruction, moral and physical deterioration of urban infrastructure, as well as the need to ensure balanced spatial development. In this regard, it is urgent to improve models and methods for assessing spatial parameters of investment projects and urban reconstruction programs that cover various types of objects - residential, public, industrial, religious buildings and structures. Existing methodological approaches are mostly focused on financial and economic assessment, while spatial, environmental, social and energy-efficient aspects remain fragmentarily taken into account or presented as auxiliary criteria. The need to improve such models lies in the transition from purely economic analysis to a comprehensive spatial and functional assessment based on the principles of sustainable development and digital transformation. A promising direction is the integration of information modeling (BIM, CIM) with geographic information technologies (GIS), which allows combining technical and economic indicators of investment projects with the parameters of the spatial organization of urban areas. Such digital models will contribute to a more accurate determination of the effectiveness of reconstruction measures, optimization of the use of territories, assessment of the impact of projects on social infrastructure and the environment. Further development of the evaluation methodology should include the use of multi-criteria decision-making methods (AHP, TOPSIS, SMART), methods of estimating the cost during the life cycle of buildings (LCC - Life Cycle Costing), as well as approaches to assessing energy efficiency, thermal modernization and cost management in the dynamics of the life cycle of the facility. It is also important to develop an integrated system of indicators that takes into account investment attractiveness, the level of social efficiency, spatial balance and compliance with strategic plans for the development of the city. Thus, improving models and methods for assessing spatial parameters of urban reconstruction investment projects creates the basis for improving the quality of management decisions, effective resource allocation, and the formation of a scientifically sound policy for the restoration and modernization of the urban environment based on the principles of sustainable development, digitalization, and energy efficiency.
- 29 November 2024
- Published by Kyiv National University of Construction and Architecture in WAYS TO IMPROVE CONSTRUCTION EFFICIENCY
- Vol. 2 (54) , 380-394
Open AccessModels and methods for assessing spatial parameters of investment projects and urban reconstruction programs
Modern processes of reconstruction of Ukrainian cities are taking place in conditions of significant socio-economic transformations caused by the consequences of war destruction, moral and physical deterioration of urban infrastructure, as well as the need to ensure balanced spatial development. In this regard, it is urgent to improve models and methods for assessing spatial parameters of investment projects and urban reconstruction programs that cover various types of objects - residential, public, industrial, religious buildings and structures. Existing methodological approaches are mostly focused on financial and economic assessment, while spatial, environmental, social and energy-efficient aspects remain fragmentarily taken into account or presented as auxiliary criteria. The need to improve such models lies in the transition from purely economic analysis to a comprehensive spatial and functional assessment based on the principles of sustainable development and digital transformation. A promising direction is the integration of information modeling (BIM, CIM) with geographic information technologies (GIS), which allows combining technical and economic indicators of investment projects with the parameters of the spatial organization of urban areas. Such digital models will contribute to a more accurate determination of the effectiveness of reconstruction measures, optimization of the use of territories, assessment of the impact of projects on social infrastructure and the environment. Further development of the evaluation methodology should include the use of multi-criteria decision-making methods (AHP, TOPSIS, SMART), methods of estimating the cost during the life cycle of buildings (LCC - Life Cycle Costing), as well as approaches to assessing energy efficiency, thermal modernization and cost management in the dynamics of the life cycle of the facility. It is also important to develop an integrated system of indicators that takes into account investment attractiveness, the level of social efficiency, spatial balance and compliance with strategic plans for the development of the city. Thus, improving models and methods for assessing spatial parameters of urban reconstruction investment projects creates the basis for improving the quality of management decisions, effective resource allocation, and the formation of a scientifically sound policy for the restoration and modernization of the urban environment based on the principles of sustainable development, digitalization, and energy efficiency.