CFD-Guided Evaluation of Spark-Assisted Gasoline Compression Ignition for Cold Idle Operation
Open Access
- 26 November 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (23) , 13096
Abstract
A closed-cycle, three-dimensional (3D) computational fluid dynamics (CFD) analysis campaign was conducted to evaluate the performance of using spark plugs to assist gasoline compression ignition (GCI) combustion during cold idle operations. A conventional spark plug using single-sided J-strap design was put at a location on the cylinder head to facilitate spray-guided spark assistance. Ignition was modeled with an L-type energy distribution to depict the breakdown and the arc-to-glow phases during the energy discharge process. Several key design parameters were investigated, including injector clocking, number of nozzle holes, spray inclusion angle, number of fuel injections, fuel split ratio, and fuel injection timings. The study emphasized the region around the spark gap, focusing on flame kernel formation and development and local equivalence ratio distribution. Flame kernel development and the ignition process were found to correlate strongly with the fuel stratification and the flow velocity near the spark gap. The analysis results showed that the flame kernel development followed the direction of the local flow field. In addition, the local fuel stratification notably influenced early-stage flame kernel development due to varying injection spray patterns and the fuel injection strategies. Among these design parameters, the number of nozzle holes and fuel injection timing had the most significant effects on the engine combustion performance.Keywords
This publication has 32 references indexed in Scilit:
- Examining the role of flame topologies and in-cylinder flow fields on cyclic variability in spark-ignited engines using large-eddy simulationInternational Journal of Engine Research, 2017
- Gasoline Fuels Assessment for Delphi’s Second Generation Gasoline Direct-Injection Compression Ignition (GDCI) Multi-Cylinder EngineSAE International Journal of Engines, 2017
- Increasing the Load Range, Load-to-Boost Ratio, and Efficiency of Low-Temperature Gasoline Combustion (LTGC) EnginesSAE International Journal of Engines, 2017
- Large eddy simulation of a reacting spray flame with multiple realizations under compression ignition engine conditionsCombustion and Flame, 2015
- Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion enginesProgress in Energy and Combustion Science, 2015
- CFD Investigation on the Influence of In-Cylinder Mixture Distribution from Multiple Pilot Injections on Cold Idle Behaviour of a Light Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2014
- Exploring a Gasoline Compression Ignition (GCI) Engine ConceptSAE International Journal of Advances and Current Practices in Mobility, 2013
- Enhancement on a Skeletal Kinetic Model for Primary Reference Fuel Oxidation by Using a Semidecoupling MethodologyEnergy & Fuels, 2012
- HCCI experiments with toluene reference fuels modeled by a semidetailed chemical kinetic modelCombustion and Flame, 2008
- Experimental metrics for identifying origins of combustion variability during spark-assisted compression ignitionInternational Journal of Engine Research, 2008