YZYu Zhang

Yu Zhang

*This is an algorithmically generated author record based on publicly available information.

Yu Zhang has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Optimization of Spray-Guided Spark Assistance for Cold Idle Operation in a Heavy-Duty Gasoline Compression Ignition Engine

    by Le Zhao, Yu Zhang, Yuanjiang Pei, Anqi Zhang, Muhsin M. Ameen

    This article describes the results of a response surface model (RSM)-based numerical optimization campaign for spray-guided spark assistance at cold operations in a heavy-duty gasoline compression ignition (GCI) engine. On the basis of an earlier work on spark-assisted GCI cold combustion, a space-filling design of experiments (DoE) method was first undertaken to investigate a multitude of hardware design variables and engine operating parameters. The main design variables included the number of injector nozzles, fuel split quantities and injection timings, and spark timing. The objective variables were engine combustion efficiency (ŋc), maximum pressure rise rate (MPRR), and engine-out nitrogen oxide (NOx) emissions. A total of 150 design candidates were automatically generated using the Sobol sequence method provided by the commercial software package, CAESES. Then, closed-cycle computational fluid dynamic (CFD) spark-assisted GCI simulations under cold idling operations were performed. The outcomes from the CFD-DoE design campaign were utilized to construct high-fidelity RSMs that allowed for further design optimization of the spark plug- and fuel injector-related design variables, along with fuel injection strategy parameters. A merit function with respect to objective variables was formulated with an appropriate weight assignment on each objective variable. Finally, the best design candidate was identified from the RSM-based optimization process and further validated in the CFD analysis. The best design candidate showed the potential to significantly improve combustion efficiency (ŋc > 90%) over the baseline at cold idle while satisfying MPRR and NOx emissions constraints (MPRR < 5 bar/CAD and NOx < 4.5 g/kWh).


  • Open Access

    Variable Valve Strategy Evaluation for Low-Load Operation in a Heavy-Duty Gasoline Compression Ignition Engine

    by Praveen Kumar, Yu Zhang

    By harnessing gasoline’s low reactivity for partially premixed combustion promotion, gasoline compression ignition (GCI) combustion shows the potential to produce markedly improved NOx-soot trade-off with high fuel efficiency compared to conventional diesel combustion. However, at low-load conditions, gasoline’s low reactivity poses challenges to attaining robust combustion with low unburned hydrocarbons (UHC) and carbon monoxide (CO) emissions. Increasing the in-cylinder charge temperature by using variable valve actuation (VVA) can be an effective means to address these challenges. In this numerical investigation, VVA strategies, including (1) early exhaust valve opening (EEVO), (2) positive valve overlap (PVO), and (3) exhaust rebreathe (ExReb), were investigated at 1375 RPM and 2 bar brake mean effective pressure in a heavy-duty GCI engine using a market-based gasoline with a research octane number (RON) of 93. The total residual gas level was kept over 50% to achieve an engine-out NOx target of below 1.5 g/kWh. For a complete engine system analysis, one-dimensional (1-D) system-level modeling and three-dimensional (3-D) computational fluid dynamics (CFD) analysis were close-coupled in this study. Performance of the VVA strategies was compared in terms of in-cylinder charge and exhaust gas temperatures increase versus brake-specific fuel consumption (BSFC). The EEVO strategy demonstrated in-cylinder charge and exhaust temperature increase up to 130 and 180 K, respectively. For similar in-cylinder charge temperature gains, the ExReb strategy demonstrated 11% to 18% lower BSFC compared to the EEVO strategy. This benefit primarily originated from a more efficient gas-exchange process. The PVO strategy, due to the valve–piston contact constraint, required excessive exhaust back-pressure valve (BPV) throttling for hot residuals trapping, thereby incurring higher BSFC compared to ExReb. In addition, the ExReb strategy demonstrated the highest potential for exhaust temperature increase (up to 673 K) among the three strategies. This was achieved by ExReb’s maximum air-fuel ratio reduction from high internal residuals mass and BPV throttling. Finally, the ExReb profile was optimized in terms of the peak lift, the duration, and the location for maximizing the fuel-efficiency potential of the strategy.


  • Open Access

    An Experimental and Computational Investigation of Tailor-Developed Combustion and Air-Handling System Concepts in a Heavy-Duty Gasoline Compression Ignition Engine

    by Yu Zhang, Praveen Kumar, Yuanjiang Pei, Michael Traver, Sriram Popuri

    This study investigates using tailor-developed combustion and air-handling system concepts to achieve high-efficiency, clean gasoline compression ignition (GCI) combustion, aimed at addressing a future heavy-duty ultralow NOx standard of 0.027 g/kWh at the vehicle tailpipe and the tightening CO2 limits around the world by combining GCI with a cost-effective engine aftertreatment system. The development activities were conducted based on a 15 L heavy-duty diesel engine. By taking an analysis-led design approach, a first-generation (Gen1) GCI engine concept was developed and tested, encompassing tailor-designed piston bowl geometry, fuel spray pattern, and swirl motion paired with a customized, fixed-geometry, two-stage turbocharging system and a high-pressure EGR loop with two-stage cooling. Across four key steady-state operating points, the Gen1 GCI concept demonstrated 85–95% lower smoke and 2–3% better diesel-equivalent gross indicated fuel consumption compared to the diesel baseline at 1 g/kWh engine-out NOx. By upgrading to a Gen2 air-handling concept that was composed of a prototype, single-stage, variable-geometry turbocharger and a less restrictive EGR loop, 1D system-level analysis predicted that the pumping mean effective pressure was reduced by 43–54% and the diesel-equivalent brake-specific fuel consumption was improved by 2–4%, thereby demonstrating the performance enhancement potential of refining the air-handling system.


  • Open Access

    CFD-Guided Evaluation of Spark-Assisted Gasoline Compression Ignition for Cold Idle Operation

    by Le Zhao, Yu Zhang, Yuanjiang Pei, Anqi Zhang, Muhsin M Ameen

    A closed-cycle, three-dimensional (3D) computational fluid dynamics (CFD) analysis campaign was conducted to evaluate the performance of using spark plugs to assist gasoline compression ignition (GCI) combustion during cold idle operations. A conventional spark plug using single-sided J-strap design was put at a location on the cylinder head to facilitate spray-guided spark assistance. Ignition was modeled with an L-type energy distribution to depict the breakdown and the arc-to-glow phases during the energy discharge process. Several key design parameters were investigated, including injector clocking, number of nozzle holes, spray inclusion angle, number of fuel injections, fuel split ratio, and fuel injection timings. The study emphasized the region around the spark gap, focusing on flame kernel formation and development and local equivalence ratio distribution. Flame kernel development and the ignition process were found to correlate strongly with the fuel stratification and the flow velocity near the spark gap. The analysis results showed that the flame kernel development followed the direction of the local flow field. In addition, the local fuel stratification notably influenced early-stage flame kernel development due to varying injection spray patterns and the fuel injection strategies. Among these design parameters, the number of nozzle holes and fuel injection timing had the most significant effects on the engine combustion performance.


  • Open Access

    Piston Bowl Geometry Effects on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine

    by Meng Tang, Yuanjiang Pei, Hengjie Guo, Yu Zhang, Roberto Torelli, Daniel Probst, Carsten F\Xfctterer, Michael Traver

    A design optimization campaign was conducted to search for improved combustion profiles that enhance gasoline compression ignition in a heavy-duty diesel engine with a geometric compression ratio of 17.3. Three-dimensional computational fluid dynamics simulations were employed using the software package CONVERGE. A large-scale design of experiments (DoE) approach was used for the

  • Open Access

    Numerical Evaluation of Spray-Guided Glow Plug Assistance on Gasoline Compression Ignition During Cold Idle Operation in a Heavy-Duty Diesel Engine

    by LE Zhao, Muhsin M Ameen, Yuanjiang Pei, Yu Zhang, Michael Traver, Praveen Kumar, Tom Tzanetakis

    *Starting compression ignition engines under cold conditions is extremely challenging, due to insufficient fuel vaporization, heavy wall impingement, and low ignitability of the fuel. For gasoline compression ignition (GCI) combustion strategies, which offer the potential for an enhanced NOx-PM tradeoff with diesel-like fuel efficiency, robust ignition and combustion in very cold


  • Open Access

    Impact of Geometric Compression Ratio and Variable Valve Actuation on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine

    by Yu Zhang, Praveen Kumar, Meng Tang, Yuanjiang Pei, Brock Merritt, Michael Traver, Sriram Popuri

    Gasoline compression ignition (GCI) is a promising powertrain solution to address the increasingly stringent regulation of oxides of nitrogen (NOx) and a new focus on greenhouse gases. This work was conducted in a Cummins ISX15 heavy-duty diesel engine. The test fuel was an ethanol-free gasoline with a research octane number (RON) of 93. In the experimental investigation, the

  • Open Access

    Numerical Investigation of Pre-Chamber Jet Combustion in a Light-Duty Gasoline Engine

    by Anqi Zhang, Xin Yu, Nayan Engineer, Yu Zhang, Yuanjiang Pei

    Division / Sponsors: Internal Combustion Engine Division (ICED)


  • Open Access

    Cavitation-Suppressing Orifice Design Applied to a Heavy-Duty Diesel Engine Injector Operating With Gasoline

    by Roberto Torelli, Yuanjiang Pei, Yu Zhang, Michael Traver, Sibendu Som

    *Measurements of fuel injectors via non-destructive X-ray techniques can provide unique insights about an injector’s internal surface. Using real measured geometry rather than nominal design geometry in computational fluid dynamics simulations can improve the accuracy of the numerical models dramatically. Recent work from the authors investigated the influence of the injector