Effect of Sn Content in a CuSnZn Metal Precursor on Formation of MoSe2 Film during Selenization in Se+SnSe Vapor
Open Access
Abstract
The preparation of Cu2ZnSnSe4 (CZTSe) thin films by the selenization of an electrodeposited copper–tin–zinc (CuSnZn) precursor with various Sn contents in low-pressure Se+SnSex vapor was studied. Scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) measurements revealed that the Sn content of the precursor that is used in selenization in a low-pressure Se+SnSex vapor atmosphere only slightly affects the elemental composition of the formed CZTSe films. However, the Sn content of the precursor significantly affects the grain size and surface morphology of CZTSe films. A metal precursor with a very Sn-poor composition produces CZTSe films with large grains and a rough surface, while a metal precursor with a very Sn-rich composition procures CZTSe films with small grains and a compact surface. X-ray diffraction (XRD) and SEM revealed that the metal precursor with a Sn-rich composition can grow a thicker MoSe2 thin film at CZTSe/Mo interface than one with a Sn-poor composition, possibly because excess Sn in the precursor may catalyze the formation of MoSe2 thin film. A CZTSe solar cell with an efficiency of 7.94%was realized by using an electrodeposited metal precursor with a Sn/Cu ratio of 0.5 in selenization in a low-pressure Se+SnSex vapor.Keywords
This publication has 31 references indexed in Scilit:
- Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursorsDiscover Nano, 2014
- On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contactApplied Physics Letters, 2013
- A Detrimental Reaction at the Molybdenum Back Contact in Cu2ZnSn(S,Se)4 Thin-Film Solar CellsJournal of the American Chemical Society, 2012
- Chemical Insights into the Instability of Cu2ZnSnS4 Films during AnnealingChemistry of Materials, 2011
- Earth‐Abundant Element Photovoltaics Directly from Soluble Precursors with High Yield Using a Non‐Toxic SolventAdvanced Energy Materials, 2011
- The path towards a high-performance solution-processed kesterite solar cellSolar Energy Materials and Solar Cells, 2011
- The Consequences of Kesterite Equilibria for Efficient Solar CellsJournal of the American Chemical Society, 2011
- Cu2ZnSnS4 thin film solar cells from electroplated precursors: Novel low-cost perspectiveThin Solid Films, 2009
- Phase equilibria in the Cu2SnSe3–SnSe2–ZnSe systemJournal of Alloys and Compounds, 2003
- CuIn(Ga)Se2-based devices via a novel absorber formation processSolar Energy Materials and Solar Cells, 2000