Unbiased roughness measurements from low signal-to-noise ratio scanning electron microscope images
- 14 December 2022
- journal article
- research article
- Published by SPIE-Intl Soc Optical Eng in Journal of Micro/Nanopatterning, Materials, and Metrology
- Vol. 22 (02) , 021006-10
Abstract
BackgroundMeasuring and subtracting scanning electron microscope (SEM) noise from a biased measurement of roughness leads to an unbiased roughness measurement. This unbiasing procedure becomes harder as the noise in the image increases. For low image signal-to-noise ratio (SNR) (below about 2), unbiased roughness measurement becomes less reliable.AimIt is important to understand the mechanism for the sensitivity of unbiased roughness accuracy to linescan SNR to look for ways to improve unbiased roughness measurement for very noisy images.ApproachUsing a combination of mathematical analysis, simulations, and experimental data, the role of pixel size and pitch in the SNR sensitivity are explored.ResultsAll evidence points to the correlation of edge detection noise to true edge position as the cause of the errors in unbiased roughness measurement for very noisy images. For small pitch patterns, changes in feature edge position caused by feature roughness will cause changes to the linescan slope, which in turn changes the sensitivity of edge detection to SEM image noise.ConclusionsSmaller pixel sizes and larger feature sizes are less sensitive to the SNR effects described here. For any algorithm used to measure unbiased roughness, the impact of linescan SNR must be carefully assessed.Keywords
This publication has 13 references indexed in Scilit:
- Determining the ultimate resolution of scanning electron microscope-based unbiased roughness measurements. I. Simulating noiseJournal of Vacuum Science & Technology B, 2019
- Unbiased roughness measurements: subtracting out SEM effects, part 32019
- Unbiased roughness measurements: Subtracting out SEM effects, part 2Journal of Vacuum Science & Technology B, 2018
- Reducing roughness in extreme ultraviolet lithographyJournal of Micro/Nanolithography, MEMS, and MOEMS, 2018
- Unbiased roughness measurements: Subtracting out SEM effectsMicroelectronic Engineering, 2018
- Using the analytical linescan model for SEM metrology2017
- Improvements to the analytical linescan model for SEM metrology2016
- Analytical linescan model for SEM metrology2015
- Generating random rough edges, surfaces, and volumesApplied Optics, 2013
- Unbiased estimation of linewidth roughness2005