Effects of Hydride Morphology on Zr-2.5Nb Fracture Toughness
Authors:
- 1 January 1989
- book chapter
- Published by ASTM International
- p. 66-88
Abstract
The effects of hydride morphology on the axial fracture toughness of cold-worked Zr-2.5Nb pressure tube material have been determined between room temperature and 240°C. Tests were performed on small compact tension specimens machined from samples of material prepared with different morphologies and hydrogen concentrations. The morphologies were characterized by a parameter referrred to as the hydride continuity coefficient (HCC), which provides a measure of the extent to which hydrides are oriented in the axial-radial plane of the pressure tube. Hydrides in this orientation are known to be detrimental to the fracture properties of the tube. Fracture toughness was characterized by a J-R curve technique, from which it is possible to estimate the maximum stable size of a through-wall axial crack for typical reactor operating conditions. Material with HCC values greater than 0.5 exhibited low toughness from room temperature to 240°C, at which temperature there was an abrupt transition to an upper shelf toughness value. As HCC decreases, the transition to upper shelf toughness occurs more gradually and is complete at a lower temperature.Keywords
This publication has 12 references indexed in Scilit:
- The influence of hydride size and matrix strength on fracture initiation at hydrides in zirconium alloysMetallurgical Transactions A, 1988
- Determination of the Fracture Toughness of Irradiated Reactor Pressure Tubes Using Curved Compact Specimens1988
- Effect of Metallurgical Variables and Temperature on the Fracture Toughness of Zirconium Alloy Pressure Tubes1987
- Minimizing Hydride Cracking in Zirconium AlloysCanadian Metallurgical Quarterly, 1985
- Criteria for Fracture Initiation at Hydrides in Zirconium-2.5 Pct Niobium AlloyMetallurgical Transactions A, 1981
- Fracture toughness of zirconium hydride and its influence on the crack resistance of zirconium alloysJournal of Nuclear Materials, 1979
- An Elastic-Plastic R-Curve Description of Fracture in Zr-2.5Nb Pressure Tube Alloy1979
- Failure Stress Levels of Flaws in Pressurized Cylinders1973
- Hydrogen supercharging during thermal cycling of zirconiumJournal of Nuclear Materials, 1970
- Some observations on the deformation characteristics of bulk polycrystalline zirconium hydridesJournal of Materials Science, 1969