As-built CAD and ANSYS structural–thermal validation of a locally fabricated anaerobic co-digester for institutional organic waste in Uganda
Open Access
- 15 September 2026
- journal article
- Published by F1000 Research Ltd in F1000Research
- Vol. 15, 1541
Abstract
Background Locally fabricated anaerobic digesters are commonly sized from biochemical yield assumptions without checking fabricated geometry, pressure resistance, insulation performance, or commissioning evidence. This study integrated waste assessment, as-built computer-aided design (CAD), finite-element analysis, and start-up monitoring of a stainless-steel anaerobic co-digester at Uganda Technical College Bushenyi. Methods Available food, fecal, and green-yard wastes were constrained to a C/N ratio of 25–30. The fabricated geometry was reconstructed in CAD. ANSYS Mechanical APDL evaluated shell response at 0.200 and 1.318 MPa, while an axisymmetric thermal model evaluated lateral heat loss through the double wall. Digester temperature, ambient temperature, and pH were monitored for 29 days; gas was screened once. Results Of 506.00 kg d-1 available waste, 350.32 kg d-1 met the C/N constraint. The corrected theoretical biogas potential was 33.44 m3 d-1; this was not a measured production rate. The as-built inner shell was 346 mm x 692 mm x 3 mm. At 0.200 MPa, ANSYS predicted 10.03 MPa equivalent stress and 0.0199 mm displacement. The thermal model predicted 16.68 W lateral holding loss at a 35 degrees C inner-wall boundary. The unheated prototype remained near ambient temperature, acidified before wood-ash addition, and produced non-igniting, oxygen-containing gas. Conclusions The fabricated vessel has a traceable preliminary structural and thermal basis, but commissioning did not demonstrate methane production or readiness for kitchen use. Controlled biomethane-potential testing, calibrated gas-volume and composition measurements, process-stability monitoring, and detailed pressure-vessel assessment are required before deployment.Keywords
This publication has 10 references indexed in Scilit:
- A comprehensive study on anaerobic digestion of organic solid waste: A review on configurations, operating parameters, techno-economic analysis and current trendsBiotechnology Notes, 2024
- Experimental evaluation of fresh human feces biogas and compost potential: Evidence for circular economy from waste streams in EthiopiaHeliyon, 2023
- Advances in Computational Fluid Dynamics modeling of anaerobic digestion process for renewable energy production: A reviewCleaner Waste Systems, 2023
- Evaluation of hydraulic mixing performance in a full-scale anaerobic digester with an external liquid recirculation system using CFD and experimental validationChemical Engineering Science, 2022
- Assessment of the energy needs for cooking local food in Uganda: A strategy for sizing thermal energy storage with cooker systemEnergy for Sustainable Development, 2022
- An analysis of bio-digester substrate heating methods: A reviewRenewable and Sustainable Energy Reviews, 2021
- Investigation of hydrodynamics in high solid anaerobic digestion by particle image velocimetry and computational fluid dynamics: Role of mixing on flow field and dead zone reductionBioresource Technology, 2021
- Performance evaluation of anaerobic digestion technology for energy recovery from organic fraction of municipal solid waste: A reviewEnergy, 2020
- Biochemical Methane Potential (BMP) Assay Method for Anaerobic Digestion ResearchWater, 2019
- Methane Production of Full-Scale Anaerobic Digestion Plants Calculated from Substrate’s Biomethane Potentials Compares Well with the One Measured On-SiteFrontiers in Energy Research, 2017