Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pius Erheyovwe Bubu has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Techno-Economic and Security-Constrained Expansion Planning of the 132-kV Western Uganda Transmission Network

    by Asiimwe Julius, Pius Erheyovwe Bubu, Elnazeer Ali Hamid Abdalla, Abdullahi Bala Kunya, Val Hyginus Udoka Eze, Mugisha Simon

    Background Rapid demand growth can expose developing transmission systems to corridor overload, voltage deterioration and contingency vulnerability before major reinforcement is completed. Methods We evaluated expansion of the 132-kV Western Uganda network using full AC power flow, multi-objective planning, N−1 contingency analysis, demand-growth stress testing and discounted economic assessment. Results At 184 MW and 75 MVAr base demand, the existing network lost 2.8767 MW and the Mutundwe–Kabulasoke corridor reached 131.67% loading. A two-circuit plan—Mbarara North–Masaka West and an additional Mutundwe–Kabulasoke circuit—costing USD 117.76 million reduced losses to 1.7261 MW, aggregate voltage deviation from 0.1908 to 0.0974 p.u., and maximum loading to 64.66%. Secure N−1 outcomes improved from 0/12 to 11/14, but two radial-islanding risks and one bulk-entry overload remained. The expanded network met voltage and thermal limits through 120% demand; thermal loading reached 111.7% at 130%. Loss-only discounted benefits produced negative net present value across the tested assumptions. Conclusions The results indicate that transmission reinforcement can improve technical performance and contingency security, while a complete investment appraisal also requires monetised reliability, resilience and transfer-capacity benefits.

  • Generation-gap-driven design and techno-economic simulation of a solar photovoltaic–hydropower hybrid system for seasonal supply support in Walungu, Democratic Republic of Congo

    by Kelechi John Ukagwu, Val Hyginus Udoka Eze, Aluma Malikopo Eric, Stephen Ndubuisi Nnamchi, Zaina Kalyankolo, Josephine Najjobyo, Bubu Pius Erheyovwe

  • Reproducibility-aware deep learning analysis of MHD boundary-layer flow and thermal transport in a representative Cu–Ga effective-medium model

    by Val Hyginus Udoka Eze, Bubu Pius Erheyovwe, Kelechi John Ukagwu, Milon Selvam Dennison, Obinna Onyebuchi Barah, Onep Samuel George, Ninsiima Emmanuel, Chikadibia Kalu Awa Uche, Elnazeer Ali Hamid Abdalla

  • Open Access

    Numerical investigation of the impact of neural stem cells on brain tumors

    by Pius Erheyovwe Bubu, Val Hyginus Udoka Eze, Kelechi John Ukagwu, Vidya Sankarapandian, Saidi Odoma, Awafung Emmanuel Adie, Nansamba Fridah Mirembe

    Malignant brain tumors, including glioblastoma and medulloblastoma, remain highly treatment-resistant. Neural stem cells (NSCs) are being investigated as tumor-tropic therapeutic vectors, but the temporal interaction between tumor and NSC populations requires quantitative characterization before model-based treatment hypotheses can be interpreted reliably. This study aimed to develop and numerically evaluate a reproducible 2-population model of tumor–NSC dynamics and to quantify the influence of NSC persistence and NSC-mediated tumor killing on simulated tumor burden. A normalized system of 2 coupled nonlinear ordinary differential equations was used: dT / dt = rT (1 − T ) − β T N and d N/ dt = αN(1 − N) − γ T N. The baseline simulation used r = 0.20000 day −1 , α = 0.05000 day −1 , β = 0.35000 day −1 , γ = 0.30000 day −1 , T 0 = 0.50000, and N 0 = 0.40000. Explicit Euler integration was performed with Δ t = 0.01 day over 20 days. A descriptive nonlinear regression fit, Fourier spectral analysis, 1-parameter sensitivity analyses, and joint α–β sensitivity analysis were applied to the simulated trajectory. In the baseline simulation, tumor density decreased from 0.5000 to a minimum of 0.4772 at day 2.59 (4.57% below the initial value) and subsequently increased to T 20 = 0.8273, while NSC density declined from 0.4000 to N 20 = 0.0247. The descriptive regression reproduced the simulated tumor trajectory with R 2 = 0.9973 and root mean square error = 0.00590. Increasing α from 0.05 to 0.10 day −1 reduced T 20 by 12.6% relative to baseline, and increasing β from 0.35 to 0.50 day −1 reduced T 20 by 19.9%. Jointly setting α = 0.10 and β = 0.50 day −1 yielded T 20 = 0.4427, 46.5% below the baseline terminal tumor density. The Fourier spectrum was dominated by the zero and low-frequency components, with no distinct oscillatory peak over the 20-day window. The model indicates that NSC persistence and NSC-mediated tumor killing materially influence terminal tumor burden, but the baseline parameterization produces only transient early suppression followed by tumor regrowth as the NSC population declines. The results are population-level, model-based estimates rather than tumor-type-specific clinical efficacy measures. Tumour-specific calibration, spatial migration, immune interactions, and experimental validation are required before translational conclusions can be drawn.

  • Open Access

    AI-assisted nonlinear dynamical modeling of neural stem cell-mediated brain tumor suppression

    by Val Hyginus Udoka Eze, Pius Erheyovwe Bubu, Kelechi John Ukagwu, Awafung Emmanuel Adie, Nansamba Fridah Mirembe, Okechukwu Paul-Chima Ugwu


  • Open Access

    As-built CAD and ANSYS structural–thermal validation of a locally fabricated anaerobic co-digester for institutional organic waste in Uganda

    by Mukasa Bumali, Pius Erheyovwe Bubu, Onep Samuel George

    Background Locally fabricated anaerobic digesters are commonly sized from biochemical yield assumptions without checking fabricated geometry, pressure resistance, insulation performance, or commissioning evidence. This study integrated waste assessment, as-built computer-aided design (CAD), finite-element analysis, and start-up monitoring of a stainless-steel anaerobic co-digester at Uganda Technical College Bushenyi. Methods Available food, fecal, and green-yard wastes were constrained to a C/N ratio of 25–30. The fabricated geometry was reconstructed in CAD. ANSYS Mechanical APDL evaluated shell response at 0.200 and 1.318 MPa, while an axisymmetric thermal model evaluated lateral heat loss through the double wall. Digester temperature, ambient temperature, and pH were monitored for 29 days; gas was screened once. Results Of 506.00 kg d-1 available waste, 350.32 kg d-1 met the C/N constraint. The corrected theoretical biogas potential was 33.44 m3 d-1; this was not a measured production rate. The as-built inner shell was 346 mm x 692 mm x 3 mm. At 0.200 MPa, ANSYS predicted 10.03 MPa equivalent stress and 0.0199 mm displacement. The thermal model predicted 16.68 W lateral holding loss at a 35 degrees C inner-wall boundary. The unheated prototype remained near ambient temperature, acidified before wood-ash addition, and produced non-igniting, oxygen-containing gas. Conclusions The fabricated vessel has a traceable preliminary structural and thermal basis, but commissioning did not demonstrate methane production or readiness for kitchen use. Controlled biomethane-potential testing, calibrated gas-volume and composition measurements, process-stability monitoring, and detailed pressure-vessel assessment are required before deployment.

  • Open Access

    Systemic Productivity Constraints in Decentralised Public Building Delivery: Evidence from District-level Projects in Uganda

    by Chikadibia Kalu Awa Uche, Paul Yohanna, Kelechi John Ukagwu, Obinna Onyebuchi Barah, Bubu Pius Erheyovwe, Valentine Hyginus Udoka Eze

    Background This study evaluates systemic productivity constraints within decentralized public building projects in Uganda, where infrastructure delivery often faces significant delays and cost overruns. The research aims to identifies, ranks, and evaluates these constraints while assessing the level of consensus among different construction professional groups regarding the primary drivers of productivity loss. Method A mixed-methods research design was employed, integrating quantitative data from a survey of 105 construction professionals (including engineers, architects, and project managers) with qualitative insights from site observations and key-informant interviews. Data analysis utilized the Relative Importance Index (RII) to rank 32 identified productivity factors and Spearman’s rank correlation to determine the degree of inter-professional agreement on these rankings. Results The findings reveal that “Delay in payments” (RII = 0.857) is the most critical constraint affecting productivity, followed by “Inadequate site management and supervision” (RII = 0.841) and “Lack of competent staff” (RII = 0.834). High Spearman’s correlation coefficients (ranging from 0.818 to 0.891) indicate a strong consensus across professional groups, suggesting that productivity bottlenecks are systemic and institutional rather than isolated to specific technical disciplines. Conclusion The study concludes that productivity in decentralized project delivery is primarily hindered by cross-cutting administrative and management deficiencies. Addressing these constraints requires streamlined payment certification processes and the strengthening of supervisory capacity at the district level. These results provide a diagnostic framework for policy makers to implement targeted institutional reforms to improve the efficiency of routine public building programs.

  • Open Access

    Enhanced Sensitivity Dual-Channel D-Shaped Photonic Crystal Fibre Surface Plasmon Resonance Sensor for High-Precision Biochemical Detection

    by K.J. Ukagwu, Pius E. Bubu, Val Eze

    This study presents the design and numerical evaluation of a high-sensitivity, dual-channel D-shaped photonic crystal fibre (PCF) sensor based on surface plasmon resonance (SPR) for advanced biochemical sensing applications. The proposed configuration uses a side-polished D-shaped geometry with a thin gold (Au) plasmonic layer to enhance evanescent-field interaction with the surrounding analyte. Compared with conventional single-channel designs, the dual-channel architecture enables differential sensing, thereby improving detection reliability and resilience to environmental perturbations. A full-vector finite element method (FEM) with perfectly matched layer (PML) boundary conditions is used to investigate modal properties, confinement loss characteristics, and resonance behaviour. The sensor exhibits a maximum wavelength sensitivity of approximately 12,500 nm/RIU over a refractive index range of 1.33–1.40, with strong linearity and a high figure of merit (FOM). Detailed parametric analysis shows that key structural parameters, including air-hole diameter, pitch, and gold layer thickness, play a critical role in optimising plasmonic coupling and overall sensor performance. The results indicate that the proposed dual-channel D-shaped PCF-SPR sensor outperforms conventional configurations in sensitivity, spectral resolution, and operational stability. These attributes make the device a promising candidate for real-time applications in biomedical diagnostics, environmental monitoring, and chemical sensing.

  • Open Access

    Transient thermal-hydraulic modelling of a solar thermal reactor for water disinfection

    by Joseph Malisaba, Obinna Onyebuchi Barah, Pius Erheyovwe Bubu, Omer Eisa Babiker, Onep Samuel George

  • Open Access

    Hybrid Thermodynamic and Machine Learning Optimization of Plate Heat Exchanger Performance for Brewery Cooling Systems in Uganda

    by Byamanywoha Edgar, Val Hyginus Udoka Eze, Saadelnour Abdueljabbar Adam, Sanusi Yinka, Bubu Pius Erheyovwe

    Background Efficient thermal management in brewing is critical for product quality, energy efficiency, and sustainability. At Nile Breweries Limited, Mbarara, Uganda, the Plate Heat Exchanger (PHE) cooling system has faced persistent challenges in achieving the target wort outlet temperature of 283 K (10 °C) or lower. Understanding and optimizing the thermodynamic and operational performance of this system is essential, particularly in resource-constrained Sub-Saharan production environments. Methods An integrated optimization framework was developed by combining thermodynamic modeling, empirical diagnostics, and machine learning. Over 50 production batches were monitored using a high-resolution (1 Hz) dataset to assess short-term performance, while a longer dataset of 480 batches was analyzed for fouling trends. Statistical regression, LMTD analysis, and correlation tests were applied to evaluate thermal relationships, and a feedforward Artificial Neural Network (ANN) was trained on seven operational parameters in MATLAB/Simulink to enable predictive control. Results Only 14.60% of production batches achieved the cooling target (95% CI: 11.2%–18.7%). Regression analysis showed a significant positive association between wort mass flow rate and outlet temperature (slope = 1.24 K/(kg/s), p < 0.001, R 2 = 0.42), and a negative correlation with heat exchanger effectiveness (slope = –0.0037 per kg/s, p = 0.012, adjusted R 2 = 0.28). LMTD decreased with increasing wort flow (slope = –0.42 K/(kg/s), p = 0.002, R 2 = 0.36), revealing a throughput–efficiency trade-off. Water flow rate improvements diminished beyond 12.1 kg/s, showing no significant effect on effectiveness (p = 0.18) or LMTD (p = 0.15). Fouling analysis indicated a gradual decline in mass-corrected effectiveness across 480 batches (slope = –0.00001 per batch, p < 0.001, R 2 = 0.22), while wort pH exerted a minor negative effect on effectiveness (r = –0.1645). The ANN demonstrated strong predictive accuracy (R 2 = 0.8762, MSE = 0.0578, MAE = 0.0938), with residuals confirming minimal bias. Optimization identified optimal operating ranges of 16–17 kg/s for water flow and <16.5 kg/s for wort flow. Conclusions The study highlights a significant performance shortfall in the brewery’s cooling system, driven primarily by throughput–efficiency trade-offs, diminishing thermal returns, and progressive fouling. By integrating classical thermodynamic analysis with machine learning, the research demonstrates a robust and scalable framework for enhancing energy efficiency and adaptive process control in brewing and other energy-intensive industries. This work advances the application of intelligent thermal management strategies in Sub-Saharan industrial contexts, with future research recommended in real-time fouling detection, economic optimization of flow control, and hybrid predictive modeling for dynamic production environments.