Numerical Study on the Influence of the Filling Angle on the Fluid Flow during the Ingot Side Teeming Process
Authors:
Open Access
- 15 May 2021
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 92 (10) , 2100102
Abstract
High turbulence at the liquid steel−mold flux interface results in mold flux entrapments, which can generate nonmetallic inclusions during the ingot‐casting process. Those nonmetallic inclusions are detrimental to the final steel quality. The teeming process during ingot casting is typically conducted using the uphill teeming method. The authors propose a novel alternative method using a side teeming process, which decreases turbulence at the free surface. To define the optimum operational conditions, a 3D mathematical model is developed to investigate the effect of the filling angle on the motion of the free surface and the resulting shear stresses during the teeming process. The investigated filling angles are 0°, 30°, 45°, 60°, and 90°. The present findings suggest that using the filling angle of 90° between the mold and the runner is an effective way of reducing the number of inclusions due to mold flux entrapments and refractory wear.Keywords
Funding Information
- China Scholarship Council
This publication has 33 references indexed in Scilit:
- Research on ingot casting of multicrystalline silicon miscellaneous materials for solar cellJournal of Physics: Conference Series, 2020
- Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingotsThe International Journal of Advanced Manufacturing Technology, 2020
- Characterization of inclusions in axle steel by ingot castingMetallurgical Research & Technology, 2019
- Melting, Remelting, and Casting for Clean SteelSteel Research International, 2016
- Erosion and corrosion of alumina refractory by ingot casting steelsJournal of the European Ceramic Society, 2016
- An Experimental and Numerical Study of Swirling Flow Generated by TurboSwirl in an Uphill Teeming Ingot Casting ProcessISIJ International, 2016
- Uphill Teeming Utilizing TurboSwirl to Control Flow Pattern in MoldSteel Research International, 2013
- A Numerical Study of Swirl Blade Effects in Uphill Teeming CastingISIJ International, 2010
- Effect of Nozzle Swirl Blade on Flow Pattern in Runner during Uphill TeemingISIJ International, 2006
- Effect of Entrance Nozzle Design on the Fluid Flow in an Ingot Mold during FillingISIJ International, 2004