Bonding Property of Middle Temperature Sn-Ag-Cu Solder Ball Joint of Ball Grid Array Package
Authors:
- Joo Young BaeJBJoo Young Bae
- Mi-Song KimMKMi-Song Kim
- Hye Min LeeHLHye Min Lee
- Seul Gi LeeSLSeul Gi Lee
- Young-Woo LeeYLYoung-Woo Lee
- Jeong Tak MoonJMJeong Tak Moon
- Won Sik HongWHWon Sik Hong
Open Access
- 31 October 2023
- journal article
- research article
- Published by The Korean Welding and Joining Society in Journal of Welding and Joining
- Vol. 41 (5) , 379-386
Abstract
Alloying effects of Nickel and Bismuth in SAC solder to achieve mechanical and microstructural evolution were investigated by comparing three different chemical composition of solders. Sn-3.0Ag-0.5Cu (SAC305) is the most commonly used for Pb-free solder and solder balls are based on Sn-Ag-Cu alloy composition. Compositions of solder balls were Sn-3.0Ag-0.5Cu (SAC305), Sn-1.2Ag-0.5Cu-0.05Ni (SAC1205N) and Sn-Ag-Cu-Ni-Bi based solder (SACNB). Organic solderability preservative (OSP) surface finished substrate, ball grid array (BGA) package arranged by 300 ㎛ diameter solder ball and Type 4 solder paste were used. Solder ball shear test of the BGA package was conducted before the reflow soldering. Board level package bonding process was carried out by hot air reflow soldering. Void content of the BGA solder joint was investigated after soldering. The microstructure evolution before and after thermal cycle test (TCT) was observed using scanning eletron microscopy (SEM) and energy dispersive spectroscopy (EDS). After TCT, intermetallic compound (IMC) refinement and solid solution strengthening effects of Bi element addition were observed in the solder matrix, and also any segregation of Bi element was not founded. Based on these result, it was found that the solder joint reliability of the middle and low temperature solder joints was improved.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (20018332)
This publication has 16 references indexed in Scilit:
- Microstructural Evolution in SAC305 and SAC-Bi Solders Subjected to Mechanical Cycling2018
- Solder Joint Fatigue Life of Flexible Impact Sensor Module for Automotive ElectronicsKorean Journal of Metals and Materials, 2017
- Effects of Board Design Variations on the Reliability of Lead-Free Solder JointsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2012
- Impact crack propagation through the dual-phased (Cu,Ni)6Sn5 layer in Sn–Ag–Cu/Ni solder jointsMaterials Letters, 2012
- Impact of Microstructure Evolution and Isothermal Aging on Sn-Ag-Cu Solder Interconnect Board-Level High-G Mechanical Shock Performance and Crack PropagationJournal of Electronic Materials, 2011
- Kinetics of intermetallic phase formation at the interface of Sn–Ag–Cu–X (X = Bi, In) solders with Cu substrateJournal of Alloys and Compounds, 2011
- Impact of Isothermal Aging on Long-Term Reliability of Fine-Pitch Ball Grid Array Packages with Sn-Ag-Cu Solder Interconnects: Surface Finish EffectsJournal of Electronic Materials, 2010
- Alloying effect of Ni, Co, and Sb in SAC solder for improved drop performance of chip scale packages with Cu OSP pad finish2006
- Lead-free Solder Joint Reliability – State of the Art and PerspectivesJournal of Microelectronics and Electronic Packaging, 2005
- Influence of Bi on microstructures evolution and mechanical properties in Sn–Ag–Cu lead-free solderJournal of Alloys and Compounds, 2004