Brushless DC motor drive with optimal fractional-order sliding-mode control based on a genetic algorithm
Open Access
- 2 March 2025
- journal article
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 2,p. 19-23
Abstract
Introduction. Brushless DC (BLDC) motor is a type of permanent magnet synchronous motor that operates without brushes employed in many applications owing to its efficiency and control in electric cars. One of the main reasons BLDC motors are better than brushed DC motors is that they employ an electronic commutation circuit instead of a mechanical one. The fractional order sliding mode controller (FOSMC) was used, which is characterized by high durability and is not affected by the disturbances that the motor is exposed to during operation, as well as overcoming the chattering phenomenon present in the conventional sliding mode controller (CSMC). The novelty of the proposed work consists of to use FOSMC by genetic algorithm (GA) to mitigate the chattering phenomena in sliding mode control (SMC) for optimal response for speed control and regeneration braking control in BLDC motor by using single stage by voltage source inverter and decrease energy use during motor starting. Purpose. Improvement FOSMC techniques for the regulation of BLDC motor’s driving control system. Methods. Employing the GA to optimize the parameters of FOSMC to mitigate the chattering phenomenon in SMC to regulate BLDC motor’s driving control system. Results. A comparison was made between two types of sliding controllers to obtain the best performance of the control system in speed control operations and motor braking operations, the FOSMC, through parameter optimization via the GA, surpasses the CSMC in achieving optimal performance in driving the BLDC motor. Practical value. FOSMC exhibits superiority over the CSMC, as indicated by the reduced integral time absolute error in motor speed tracking and regenerative brake control, with values of (0.028, 0.046, and 0.075) for the FOSMC, in contrast to (2.72, 1.56, and 0.17) for the CSMC, the overshoot for FOSMC is (0, 0, and 11.4), but for CSMC it is (60.4, 43.7, and 11.2). During braking mode for FOSMC, the power recovery from the motor to the battery was (1.96, 9, and 17.76), but in CSMC, it was (0.99, 4.49, and 11.98). Moreover, the braking length was expedited, and the battery’s initial power consumption diminished at the outset. References 32, tables 5, figures 6.Keywords
This publication has 31 references indexed in Scilit:
- Design of sliding mode controller with improved reaching law through self-learning strategy to mitigate the torque ripple in BLDC motor for electric vehiclesComputers and Electrical Engineering, 2024
- Performance optimisation of axial flux permanent magnet brushless DC motor for electric vehicle application with the genetic algorithm (GA) approachInternational Journal of Ambient Energy, 2024
- Overview of Sliding Mode Control Technology for Permanent Magnet Synchronous Motor SystemIEEE Access, 2024
- Assessment of Adaptive Self-Learning-Based BLDC Motor Energy Management Controller in Electric Vehicles Under Real-World Driving Conditions for Performance CharacteristicsIEEE Access, 2024
- Sliding Mode Controller Enchancement for Speed Control of BLDC Motor Based On Dragonfly Algoritm2023
- Critical Review on Torque Ripple Sources and Mitigation Control Strategies of BLDC Motors in Electric Vehicle ApplicationsIEEE Access, 2023
- Performance Study of Regenerative Braking of BLDC Motor targeting Electric Vehicle Applications2022
- A Review of BLDC Motor: State of Art, Advanced Control Techniques, and ApplicationsIEEE Access, 2022
- Comparative Study Between PI Speed Control and Sliding Mode Control of BLDC Motor2020
- Application of Fractional Order Sliding Mode Control for Speed Control of Permanent Magnet Synchronous MotorIEEE Access, 2019