Preliminary Multiphysics Modeling of Electric High-Voltage Cable of Offshore Wind-Farms
Open Access
Abstract
During manufacture, handling, transportation, installation and operation, mechanical overstress can affect the electrical and thermal properties of the conductor. As the wires in general are made of copper, which is a very plastically deforming material, these stresses will gradually generate plastic deformations of the copper until the wires start to fail. The objective of this article is to study, by numerical modeling (using Comsol and Abaqus), the impact of damage mechanisms on the electrical and thermal properties of a submarine cable phase. The influence of plasticity and gradual copper wire failure on the physical behavior (electric and thermal) of the phase was assessed. The heat differences between a healthy conductor vs. a damaged one (either deformed plastically and/or with failed wires) derived from the numerical model may be an accurate indicator of the level of damage of wires, thus furthering advanced warning before being obliged to stop the exploitation because a mandatory heavy maintenance of the cables must be scheduled. Note that this can also be achieved by using an optical fiber as a sensor for structural health monitoring. This study will then make it possible to evaluate the impact of the modification of the resistance on the thermal behavior of the cable. All of these simulations will be carried out on one phase of a 36 kV 120 mm² copper submarine cable. Colloquially these are called “copper cables”, meaning cables with Cu conductors (120 mm2 is the smallest conductor cross-section for array cables, which are usually 3-phase cables).Keywords
Funding Information
- Project Flow-Cam (MarTERA EraNet)
This publication has 13 references indexed in Scilit:
- Numerical Simulation of Aging by Water-Trees of XPLE Insulator Used in a Single Hi-Voltage Phase of Smart Composite Power Cables for Offshore FarmsEnergies, 2022
- Numerical Simulation for Void Coalescence (Water Treeing) in XLPE Insulation of Submarine Composite Power CablesEnergies, 2020
- Numerical simulation of a resistant structural bonding in wind-turbine blade through the use of composite cord stitchingComposites Part B: Engineering, 2019
- On-Coupling Mechanical, Electrical and Thermal Behavior of Submarine Power PhasesEnergies, 2019
- A review of partial discharge detection, diagnosis techniques in high voltage power cables2018
- Fiber Optic Sensor Embedment Study for Multi-Parameter Strain SensingSensors, 2017
- Mechanical modeling of metallic strands subjected to tension, torsion and bendingInternational Journal of Solids and Structures, 2016
- Nonuniform Distribution of Conductivity Resulting From the Stress Exerted on a Stranded Cable During the Manufacturing ProcessIEEE Transactions on Industry Applications, 2016
- Analyse des solides déformables par la méthode des éléments finisEuropean Journal of Computational Mechanics, 2007
- A thermo-mechanical study on the electrical resistance of aluminum wire conductorsMicroelectronics Reliability, 2002