Quantifying Electrochemical Degradation in Single-crystalline LiNi0.8Mn0.1Co0.1O2–Graphite pouch cells through Operando X-ray and Post-mortem Investigations
Authors:
- Ashok S. MenonAMAshok S. Menon
- Nickil ShahNSNickil Shah
- James A. GottJGJames A. Gott
- Eleni FiamegkouEFEleni Fiamegkou
- Matthew J. W. OgleyMOMatthew J. W. Ogley
- Galo J. Paez FajardoGFGalo J. Paez Fajardo
- Naoum VaenasNVNaoum Vaenas
- Ieuan EllisIEIeuan Ellis
- Nishitha RavichandranNRNishitha Ravichandran
- Peter CloetensPCPeter Cloetens
- Dmitry KarpovDKDmitry Karpov
- Jay WarnettJWJay Warnett
Preprint
- 7 December 2023
- preprint
- Published by American Chemical Society (ACS) in ChemRxiv
Abstract
Layered nickel-rich lithium transition metal oxides (LiNixMnyCo1−x−yO2; where x ≥ 0.8), with single-crystalline morphology, are promising future high-energy-density Li-ion battery cathodes due to their ability to mitigate particle-cracking-induced degradation. This is due to the absence of grain boundaries in these materials, which prevents the build-up of bulk crystallographic strain during electrochemical cycling. Compared to their polycrystalline counterparts, there is a need to study single-crystalline Ni-rich cathodes using operando X-ray methods in uncompromised machine-manufactured industry-like full cells to understand their bulk degradation mechanisms as a function of different electrochemical cycling protocols. This can help us identify factors to improve their long-term performance. Here, through in-house operando X-ray studies of pilot-line-built LiNi0.8Mn0.1Co0.1O2–Graphite A7 pouch cells, it is shown that their electrochemical capacity fade under harsh conditions (2.5–4.4 V and 40 °C for 100 cycles at C/3 rate) primarily stems from the high-voltage reconstruction of the cathode surface from a layered to a cubic (rock salt) phase that impedes Li+ kinetics and increases cell impedance. Post-mortem electron and X-ray microscopy show that these cathodes can withstand severe anisotropic structural changes and show no cracking when cycled under such conditions. Comparing these results to those from commercial Li-ion cells with surface-modified single-crystalline Ni-rich cathodes, it is identified that cathode surface passivation can mitigate this type of degradation and prolong cycle life. In addition to furthering our understanding of degradation in single-crystalline Ni-rich cathodes, this work also accentuates the need for practically relevant and reproducible fundamental investigations of Li-ion cells and presents a methodology for achieving this.Keywords
All Related Versions
This publication has 64 references indexed in Scilit:
- Oxygen hole formation controls stability in LiNiO2 cathodesJoule, 2023
- Quantifying Degradation Parameters of Single‐Crystalline Ni‐Rich Cathodes in Lithium‐Ion BatteriesAngewandte Chemie International Edition, 2023
- Critical Perspective on the Industry‐centred Engineering of Single‐Crystalline Ni‐rich CathodesChemnanomat, 2023
- Correlative electrochemical acoustic time-of-flight spectroscopy and X-ray imaging to monitor the performance of single-crystal and polycrystalline NMC811/Gr lithium-ion batteriesJournal of Power Sources, 2022
- A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion BatteriesAdvanced Energy Materials, 2021
- High frequency impedance characteristics of cylindrical lithium-ion cells: Physical-based modeling of cell state and cell design dependenciesJournal of Power Sources, 2021
- Identifying the Origins of Microstructural Defects Such as Cracking within Ni‐Rich NMC811 Cathode Particles for Lithium‐Ion BatteriesAdvanced Energy Materials, 2020
- Boosting Reaction Homogeneity in High‐Energy Lithium‐Ion Battery Cathode MaterialsAdvanced Materials, 2020
- Fatigue of LiNi0.8Co0.15Al0.05O2 in commercial Li ion batteriesJournal of Power Sources, 2015
- Distinction of impedance responses of Li-ion batteries for individual electrodes using symmetric cellsElectrochimica Acta, 2014