High-speed single-frame polarimeter for thermal radiation to measure the 3D geometry of hot metal surfaces
Open Access
- 5 July 2024
- journal article
- research article
- Published by Springer Nature in Applied Physics B
- Vol. 130 (8)
Abstract
The 3D geometry of the interaction zone in laser material processing is of major importance as it defines the absorption of the laser beam and may influence the hydrodynamics of the process. With the aim of measuring this geometry, which typically changes with frequencies in the order of 10 kHz, a single-frame polarimeter with acquisition rates of up to 75 kHz is presented in this work. It simultaneously records four images of the thermal process emission, through four linear polarizers with different orientations. The formulae required for the reconstruction of the 3D geometry from these images are derived and validated on an example of a heated steel sphere. The reconstructed geometry was found to be in good agreement with the examined sphere. An experimental example is also given of the application of this technology to geometry measurement of a highly dynamic laser cutting front at a framerate of 75 kHz.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (431336540)
- Universität Stuttgart
This publication has 10 references indexed in Scilit:
- Influence of laser beam oscillation on the cutting front geometry investigated by high-speed 3D-measurementsProcedia CIRP, 2022
- High-speed x-ray imaging of the melt flow during laser beam cutting2022
- Determination of the geometry of laser-cutting fronts with high spatial and temporal resolutionIOP Conference Series: Materials Science and Engineering, 2021
- Konkrete Mathematik (nicht nur) für Informatiker2018
- Real-time observation of laser cutting fronts by X-ray transmissionJournal of Materials Processing Technology, 2016
- Characterizing weld pool surfaces from polarization state of thermal emissionsOptics Letters, 2013
- Possible explanations for different surface quality in laser cutting with 1 and 10 μm beamsJournal of Laser Applications, 2011
- Utilisation of Thermal Radiation for Process MonitoringPhysics Procedia, 2011
- Review of passive imaging polarimetry for remote sensing applicationsApplied Optics, 2006
- Optical constants of transition metals: Ti, V, Cr, Mn, Fe, Co, Ni, and PdPhysical Review B, 1974