A vertical four-stage low-speed research compressor: Design and experiments
- 1 November 2026
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Abstract
This paper describes a four-stage, vertical, low-speed research compressor (LSRC) at Shanghai Jiao Tong University (SJTU). The compressor has a casing diameter of 1.5 m and was designed following the Wisler similarity methodology to reproduce the aerodynamics of a rear stage of a modern civil high-pressure compressor. The vertical installation provides an axisymmetric baseline for controlled studies of non-axisymmetric tip clearance. The instrumentation combines interstage five-hole probe traverses, L-shaped probes for intra-passage flow surveys, and an 80-port flush-mounted Kulite array above all four rotor stages. Three experimental campaigns with nine test articles are reported, and repeat runs quantify the uncertainty of efficiency differences. In the first campaign, a single-variable test design isolates rotor and stator contributions to stage loss. In the second campaign, reshaping the stationary end wall of the stator hub cavity raises the design-point efficiency by 1.17 points at the same seal clearance, whereas reducing the seal clearance of the baseline cavity nearly threefold produces no resolved change. In the third campaign, a non-axisymmetric inlet guide vane stagger distribution and a second-harmonic tip clearance distribution on the first rotor reduce the design-point efficiency by 0.55 and 0.63 points, with no resolved change in stall margin. Casing pressure measurements show that the clearance pattern modulates the pressure trough beneath the tip leakage vortex at two cycles per revolution, with an amplitude eight times that of the baseline. These measurements establish the SJTU-LSRC as a multistage platform capable of resolving aerodynamic features that are difficult to isolate in high-speed rigs.Keywords
Funding Information
- National Natural Science Foundation of China (U2541277)
- National Natural Science Foundation of China (52376027)
- National Natural Science Foundation of China (92360308)
- National Science and Technology Major Project (2017-II-0004-0017)
This publication has 31 references indexed in Scilit:
- Optimization and experimental study of stationary endwall of stator labyrinth cavity in a low-speed research compressorAerospace Science and Technology, 2024
- The impact of second-harmonic tip clearance distributions caused by casing Ovalization and blade height variation in a large-scale compressor stageAerospace Science and Technology, 2024
- Overall Performance and Loss Analysis of a Low-Speed Research Compressor with Different Nonaxisymmetric Tip Clearance LayoutsJournal of Aerospace Engineering, 2023
- Effects of circumferentially non-uniform clearance on the spanwise flow characteristics in a transonic compressor rotorAerospace Science and Technology, 2023
- Flow characteristics on a 4-stage low-speed research compressor with a cantilevered statorAerospace Science and Technology, 2020
- Aerodynamic characterization of a transonic axial flow compressor stage – with asymmetric tip clearance effectsAerospace Science and Technology, 2018
- Three-dimensional compressor blading design improvements in low-speed model testingAerospace Science and Technology, 2017
- Numerical optimization for stator vane settings of multi-stage compressors based on neural networks and genetic algorithmsAerospace Science and Technology, 2016
- Impact of Geometric Variability on Axial Compressor PerformanceJournal of Turbomachinery, 2003
- Describing the uncertainties in experimental resultsExperimental Thermal and Fluid Science, 1988