Property of concrete made of recycled shale gas drilling cuttings
- 7 August 2021
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (2) , 2098-2106
Abstract
Exploration and development of shale gas generate a lot of water-based drilling cuttings (WDC), which can then be used in concrete engineering. This work studied mix ratio optimization, mechanical properties, leaching characteristics and the microstructure of the WDC concrete. The results showed that the pH and COD values of these WDC were slightly above 9.0 and 60, respectively. All other indices satisfied the first grade standard of Chinese standard GB8978. On the other hand, a moderate amount of WDC can be improved concrete properties, especially its workability and compressive strength. When the water-binder ratio is 0.52 and the sand ratio is 41%, we can obtain C25 strength grade and 130 ~ 140 mm slump grade concrete by adding high efficiency water reducing agent and fly ash. XRD and SEM analysis showed that the silica and aluminum oxide in WDC reacted with calcium hydroxide to form secondary hydration products: C–S–H gel and ettringite, which are conducive to the formation of concrete strength and solidified the heavy metals and other contaminants. EDX analysis found it is known that the hydration products in WDC concrete can bind metal elements well. The environmental leaching test shows that the recycled WDC added to concrete products as aggregate and admixture is very environmentally friendly and sustainable.Keywords
Funding Information
- Key Laboratory of Advanced Civil Engineering Materials (Tongji University), Ministry of Education (202103)
This publication has 19 references indexed in Scilit:
- Manufacture and performance of lightweight aggregate from waste drill cuttingsJournal of Cleaner Production, 2019
- Utilization of high-volume treated palm oil fuel ash to produce sustainable self-compacting concreteJournal of Cleaner Production, 2016
- Stabilisation/solidification and bioaugmentation treatment of petroleum drill cuttingsApplied Geochemistry, 2016
- Properties of cementitious material incorporating treated oil sands drill cuttings wasteConstruction and Building Materials, 2016
- Pilot tests of microbe-soil combined treatment of waste drilling sludgeNatural Gas Industry B, 2015
- Leaching assessment of concrete made of recycled coarse aggregate: Physical and environmental characterisation of aggregates and hardened concreteWaste Management, 2014
- Environmental impacts of produced water and drilling waste discharges from the Norwegian offshore petroleum industryMarine Environmental Research, 2013
- Cement–fly ash stabilisation/solidification of contaminated soil: Performance properties and initiation of operating envelopesApplied Geochemistry, 2013
- A review of the current options for the treatment and safe disposal of drill cuttingsWaste Management & Research: The Journal for a Sustainable Circular Economy, 2011
- Investigation of 4-year-old stabilised/solidified and accelerated carbonated contaminated soilJournal of Hazardous Materials, 2010