KLKe Liu

Ke Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ke Liu has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characteristic pollutants risk assessment of modified manganese residue utilization in sintered product

    by Chao-Qiang Wang, Ke Liu, De-Ming Huang, Qi-Cong Huang, Pei-Xin Wang, Xu-Dong Mei, Shu-Chun Li

    The resource disposal of electrolytic manganese residue can effectively solve the problem of environmental pollution caused by it, among which the problem of heavy metal pollution is the most prominent. In this study, a new type of eco-friendly brick mixed with electrolytic manganese residue was designed. The influence of the content of electrolytic manganese residue on its macroscopic properties, microscopic properties, and leaching characteristics was analyzed by test methods such as compressive strength test, radioactivity test, XRF, XRD, FTIR, and ICP test of bricks. The results showed that the manganese content in the EMR leachate was 8120 mg/L, which exceeded the Chinese standard. The leaching experiment of ordinary aqueous solution of sintered bricks mixed with 20% EMR showed that the content of heavy metals was far lower than the Chinese national standard. There was no non-carcinogenic risk of heavy metals in the strong acid leaching solution of sintered bricks mixed with 20% EMR. Only the carcinogenic risk values of Cr for adults and children were 4.21 × 10−4 and 9.82 × 10−4 respectively, both exceeding the USEPA limit, but the application scene of sintered bricks was difficult to achieve strong acidity, so it was judged that it had no carcinogenic risk to the human body. Characteristic heavy metals such as Mn, Cr, and As existed stably in sintered bricks through substitution and encapsulation. In addition, the compressive strength and radioactivity of EMR sintered bricks met the requirements of the Chinese national standard “Fired Ordinary Bricks.” This product can be used as national standard MU20 grade brick. This study provided an efficient method for the safe and environmentally friendly disposal of EMR in a sustainable control system.


  • Open Access

    Research Status and Environmental Protection Disposal of Recycled Electrolytic Manganese Residue

    by Ke Liu, Chao-Qiang Wang, De-Ming Huang, Qi-Cong Huang, Pei-Xin Wang, Xu-Dong Mei, Yu Chen, Shu-Chun Li, Kai Wu

    Electrolytic manganese residue (EMR) is a common industrial solid waste. The ammonia and manganese components contained in it will pollute the soil environment and have potential risks to human health. Under the premise of investigating the production of electrolytic manganese slag and conventional processes, it is found that the traditional harmless treatment methods of electrolytic manganese slag are still mainly lime solidification, cement solidification, and fly ash solidification, and the resource utilization directions such as cement, concrete, non-sintered bricks, road bases, etc. are mainly used. But, EMR contains ammonia nitrogen, and manganese (prone to leaching) that difficult to meeting environmental protection requirements by using general cement cementitious material solidification. Therefore, this study focused on manufacturing new eco-friendly bricks with EMR using calcination process. Specifically, the physical performance and environmental characterization of the sintered bricks were investigated. Furthermore, the sintering behavior and crystallization of all bricks containing EMR were studied using XRD, FT-IR, and SEM. The results showed the EMR leaching solution contained 1256 mg/L and 8120 mg/L of ammonia nitrogen and manganese, respectively, both of them exceeds Chinese standards (GB 8978-1996). Because of EMR is rich in Fe2O3 and K2O, it greatly promotes particle rearrangement and transfer in the EMR system, reducing the sintering temperature. The compressive strength, leaching performance and radioactivity of sintered bricks with EMR all met the state standard requirement for "sintered common bricks" (GB/T 5101-2017) and (GB 8978). The product can be used as bricks of MU20 grade of Chinese standard. The study provides an effective method for the safe and environmentally friendly disposal of EMR.

  • Property of concrete made of recycled shale gas drilling cuttings

    by Chao-Qiang Wang, Ke Liu, De-Ming Huang

    Exploration and development of shale gas generate a lot of water-based drilling cuttings (WDC), which can then be used in concrete engineering. This work studied mix ratio optimization, mechanical properties, leaching characteristics and the microstructure of the WDC concrete. The results showed that the pH and COD values of these WDC were slightly above 9.0 and 60, respectively. All other indices satisfied the first grade standard of Chinese standard GB8978. On the other hand, a moderate amount of WDC can be improved concrete properties, especially its workability and compressive strength. When the water-binder ratio is 0.52 and the sand ratio is 41%, we can obtain C25 strength grade and 130 ~ 140 mm slump grade concrete by adding high efficiency water reducing agent and fly ash. XRD and SEM analysis showed that the silica and aluminum oxide in WDC reacted with calcium hydroxide to form secondary hydration products: C–S–H gel and ettringite, which are conducive to the formation of concrete strength and solidified the heavy metals and other contaminants. EDX analysis found it is known that the hydration products in WDC concrete can bind metal elements well. The environmental leaching test shows that the recycled WDC added to concrete products as aggregate and admixture is very environmentally friendly and sustainable.