Effect of temperature, geometric parameters, and surface conditions on fluid mixing in a vertical port static mixer
- 4 January 2024
- journal article
- research article
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (1) , 015022
Abstract
This study comprehensively investigates how elevated temperature and surface roughness affect vertical liquid jet mixing in a multi-port nozzle, using both experimental and computational methods. It explores various geometrical parameters and precise nozzle positioning. Experiments, conducted across different temperature and surface roughness conditions, involve adjusting convergent nozzle angles, driving nozzle distance from the throat, and insert presence. Conductivity probes, turbidity meters, and pH meters quantify fluid mixing under diverse conditions. Optimal mixing conditions for vertical flow secondary fluid inlets are determined, along with corresponding mixing efficiencies for each port. Computational fluid dynamics (CFD) simulations with ANSYS Fluent R2 2001 confirm that the highest mixing efficiency of nearly 98% is achieved with an elevated temperature of 50 °C, a rough-surfaced convergent nozzle, a helical insert, and a 45 mm driving nozzle distance, when all vertical ports are open simultaneously. These findings advance understanding of optimizing vertical-flow mixing in multi-port static mixers under varying conditions.Keywords
This publication has 22 references indexed in Scilit:
- Viscoelastic flow asymmetries in a helical static mixer and their impact on mixing performanceJournal of Non-Newtonian Fluid Mechanics, 2023
- Enhanced of fluids mixing and heat transfer in a novel SSK static mixer Organic Rankine Cycle direct contact heat exchangerApplied Thermal Engineering, 2022
- Experimental and numerical investigation of turbulent flow and heat transfer characteristics in the Komax static mixerInternational Journal of Heat and Mass Transfer, 2022
- A new correlation for single-phase pressure loss through SMV static mixers at high Reynolds numbersChemical Engineering and Processing - Process Intensification, 2022
- A population balance model for the prediction of breakage of emulsion droplets in SMX+ static mixersChemical Engineering Journal, 2019
- Simulation of granular mixing in a static mixer by the discrete element methodPowder Technology, 2019
- Mixing performance in Split-And-Recombine Milli-Static Mixers—A numerical analysisChemical Engineering Research and Design, 2019
- Aerating static mixers prevent foulingJournal of Membrane Science, 2019
- Effects of internal geometry modifications on the dispersive and distributive mixing in static mixersChemical Engineering and Processing - Process Intensification, 2017
- On the performance of static mixers: A quantitative comparisonProgress in Polymer Science, 2012