K. Leo Dev Wins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
K. Leo Dev Wins has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Ebenezer Jacob Dhas Darwin Selvi
Division of Mechanical Engineering, Karunya Institute of Technology and Sciences, Coimbatore, India
11 shared publications B. Anuja Beatrice
Department of Computer Applications, Sri Krishna Arts and Science College, Coimbatore, India
4 shared publications- A. S. Varadarajan
Professor, Principal, Nehru College of Engineering and ResearchCentre,Thrissur,Kerala, India
3 shared publications - Anil Raj
Christ University
3 shared publications Pradeep George
Department of Mechanical Engineering and Energy, De Montfort University, Dubai, UAE
3 shared publicationsS. Ramani
School of Engineering, Avinashilingam Institute for Home Science and Higher Education for Women, Coimbatore, India
2 shared publications
Latest Publications
- 21 March 2026
- Published by Springer Nature in Interactions
- Vol. 247 (1) , 85
Mathematical model development for cutting temperature of AMS 5659- 15-5 PH stainless steel in milling operation using response surface methodology
- 21 March 2026
- Published by Springer Nature in Interactions
- Vol. 247 (1) , 85
Mathematical model development for cutting temperature of AMS 5659- 15-5 PH stainless steel in milling operation using response surface methodology
- 14 August 2024
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 55 (9) , 1276-1282
Effect of tungsten carbide and titanium dioxide particles on the properties of aluminium alloy 5052 hybrid composites
Aerospace and automotive industries, among others, utilize reinforced aluminium metal matrix composite materials extensively. Aluminium alloy 5052 matrix was reinforced with tungsten carbide and titanium dioxide particulate reinforcements by varying their weight fractions, to fabricate the hybrid composites. The melt‐stir casting route was used to process the materials, and their characteristics were determined by measuring Vickers microhardness, tensile strength and peak elongation. The cost‐effectiveness and productivity of the melt‐stir casting route led to its selection. Investigations were carried out to assess how reinforcement particles were mixed into the aluminium alloy matrix using scanning electron microscopy and energy‐dispersive x‐ray analysis. The microstructure of aluminium alloy 5052 showed a distinct homogenous structural integrity. Adding tungsten carbide and titanium dioxide particles to aluminium alloy 5052 led to a 6.57 % rise in the Vickers microhardness value. The tensile strength of the hybrid composites made of aluminium, tungsten carbide, and titanium dioxide increased by as much as 8.7 %. The findings demonstrated that all of the hybrid composites failed due to particle fracture and ductile fracture in the case of the as‐cast aluminium alloy 5052.
- 14 August 2024
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 55 (9) , 1276-1282
Effect of tungsten carbide and titanium dioxide particles on the properties of aluminium alloy 5052 hybrid composites
Aerospace and automotive industries, among others, utilize reinforced aluminium metal matrix composite materials extensively. Aluminium alloy 5052 matrix was reinforced with tungsten carbide and titanium dioxide particulate reinforcements by varying their weight fractions, to fabricate the hybrid composites. The melt‐stir casting route was used to process the materials, and their characteristics were determined by measuring Vickers microhardness, tensile strength and peak elongation. The cost‐effectiveness and productivity of the melt‐stir casting route led to its selection. Investigations were carried out to assess how reinforcement particles were mixed into the aluminium alloy matrix using scanning electron microscopy and energy‐dispersive x‐ray analysis. The microstructure of aluminium alloy 5052 showed a distinct homogenous structural integrity. Adding tungsten carbide and titanium dioxide particles to aluminium alloy 5052 led to a 6.57 % rise in the Vickers microhardness value. The tensile strength of the hybrid composites made of aluminium, tungsten carbide, and titanium dioxide increased by as much as 8.7 %. The findings demonstrated that all of the hybrid composites failed due to particle fracture and ductile fracture in the case of the as‐cast aluminium alloy 5052.
- 1 June 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (2) , 025559
Synergistic effect of niobium carbide and titanium nanoparticles on the mechanical and microstructural properties of Al-Zn-Mg-Cu alloy hybrid composites
In this study, an Al-Zn-Mg-Cu alloy matrix serves as the matrix material, with Niobium Carbide (NbC) and Titanium (Ti) nanoparticles acting as reinforcements to enhance composite strength. Incorporating nano-structured reinforcements significantly enhance both strength and toughness, surpassing micro-sized counterparts. To prevent nanoparticle agglomeration during manufacturing, we employ vigorous stirring via the stir casting technique to ensure uniform dispersion within the composite matrix. SEM analysis confirms uniform dispersion of NbC and Ti nanoparticles within the matrix. Experimentally, the composite exhibits exceptional tensile strength, with sample B achieving the highest load of 5500 N, correlated with an optimal NbC percentage of 5 wt% and Ti percentage of 2 wt%. However, increasing NbC percentage from 5 wt% to 10 wt% results in decreased ductility and tensile strength for composite C. Similar trends are observed in bending strength, with composite B exhibiting the highest load at 9023.8 N, surpassing samples C and D. Microhardness results demonstrate an increase with NbC content, peaking at 230 HV, but declining to 185 HV with reduced NbC and Ti concentrations. Charpy impact tests reveal a consistent rise in impact energy from samples B to D, attributed to the escalating proportion of NbC relative to Ti. Overall, meticulous material selection and processing optimization are essential for developing high-performance metal matrix composites with enhanced mechanical properties.
- 1 June 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (2) , 025559
Synergistic effect of niobium carbide and titanium nanoparticles on the mechanical and microstructural properties of Al-Zn-Mg-Cu alloy hybrid composites
In this study, an Al-Zn-Mg-Cu alloy matrix serves as the matrix material, with Niobium Carbide (NbC) and Titanium (Ti) nanoparticles acting as reinforcements to enhance composite strength. Incorporating nano-structured reinforcements significantly enhance both strength and toughness, surpassing micro-sized counterparts. To prevent nanoparticle agglomeration during manufacturing, we employ vigorous stirring via the stir casting technique to ensure uniform dispersion within the composite matrix. SEM analysis confirms uniform dispersion of NbC and Ti nanoparticles within the matrix. Experimentally, the composite exhibits exceptional tensile strength, with sample B achieving the highest load of 5500 N, correlated with an optimal NbC percentage of 5 wt% and Ti percentage of 2 wt%. However, increasing NbC percentage from 5 wt% to 10 wt% results in decreased ductility and tensile strength for composite C. Similar trends are observed in bending strength, with composite B exhibiting the highest load at 9023.8 N, surpassing samples C and D. Microhardness results demonstrate an increase with NbC content, peaking at 230 HV, but declining to 185 HV with reduced NbC and Ti concentrations. Charpy impact tests reveal a consistent rise in impact energy from samples B to D, attributed to the escalating proportion of NbC relative to Ti. Overall, meticulous material selection and processing optimization are essential for developing high-performance metal matrix composites with enhanced mechanical properties.
- 4 January 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (1) , 015022
Effect of temperature, geometric parameters, and surface conditions on fluid mixing in a vertical port static mixer
This study comprehensively investigates how elevated temperature and surface roughness affect vertical liquid jet mixing in a multi-port nozzle, using both experimental and computational methods. It explores various geometrical parameters and precise nozzle positioning. Experiments, conducted across different temperature and surface roughness conditions, involve adjusting convergent nozzle angles, driving nozzle distance from the throat, and insert presence. Conductivity probes, turbidity meters, and pH meters quantify fluid mixing under diverse conditions. Optimal mixing conditions for vertical flow secondary fluid inlets are determined, along with corresponding mixing efficiencies for each port. Computational fluid dynamics (CFD) simulations with ANSYS Fluent R2 2001 confirm that the highest mixing efficiency of nearly 98% is achieved with an elevated temperature of 50 °C, a rough-surfaced convergent nozzle, a helical insert, and a 45 mm driving nozzle distance, when all vertical ports are open simultaneously. These findings advance understanding of optimizing vertical-flow mixing in multi-port static mixers under varying conditions.
- 4 January 2024
- Published by IOP Publishing in Engineering Research Express
- Vol. 6 (1) , 015022
Effect of temperature, geometric parameters, and surface conditions on fluid mixing in a vertical port static mixer
This study comprehensively investigates how elevated temperature and surface roughness affect vertical liquid jet mixing in a multi-port nozzle, using both experimental and computational methods. It explores various geometrical parameters and precise nozzle positioning. Experiments, conducted across different temperature and surface roughness conditions, involve adjusting convergent nozzle angles, driving nozzle distance from the throat, and insert presence. Conductivity probes, turbidity meters, and pH meters quantify fluid mixing under diverse conditions. Optimal mixing conditions for vertical flow secondary fluid inlets are determined, along with corresponding mixing efficiencies for each port. Computational fluid dynamics (CFD) simulations with ANSYS Fluent R2 2001 confirm that the highest mixing efficiency of nearly 98% is achieved with an elevated temperature of 50 °C, a rough-surfaced convergent nozzle, a helical insert, and a 45 mm driving nozzle distance, when all vertical ports are open simultaneously. These findings advance understanding of optimizing vertical-flow mixing in multi-port static mixers under varying conditions.
- 28 December 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 54 (12) , 1537-1541
Empirical modeling of profile roughness parameters during end milling of aluminium alloy 5052/tungsten carbide/graphite hybrid composite
This study presents an empirical modeling approach to reveal the effect of end milling parameters on the profile roughness parameters. Aluminium hybrid composite was melt‐stir die cast into the required work material, setting a predetermined weight fraction of reinforcements. The experimental design was adopted using the Taguchi meta‐heuristic algorithm for the selection of the levels of the end milling parameters. The profile roughness parameters namely arithmetic average roughness (Ra), root mean square roughness (Rq), and mean roughness depth (Rz) were considered as output responses, which were measured using stylus type surface roughness tester. Non‐linear second‐order empirical models were formulated and from them, the profile response parameters were predicted with 95 % accuracy. The results revealed that the depth of cut and spindle speed are contributing 54.22 % and 38.6 % respectively among the selected input parameters on the cumulative output.
- 28 December 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
- Vol. 54 (12) , 1537-1541
Empirical modeling of profile roughness parameters during end milling of aluminium alloy 5052/tungsten carbide/graphite hybrid composite
This study presents an empirical modeling approach to reveal the effect of end milling parameters on the profile roughness parameters. Aluminium hybrid composite was melt‐stir die cast into the required work material, setting a predetermined weight fraction of reinforcements. The experimental design was adopted using the Taguchi meta‐heuristic algorithm for the selection of the levels of the end milling parameters. The profile roughness parameters namely arithmetic average roughness (Ra), root mean square roughness (Rq), and mean roughness depth (Rz) were considered as output responses, which were measured using stylus type surface roughness tester. Non‐linear second‐order empirical models were formulated and from them, the profile response parameters were predicted with 95 % accuracy. The results revealed that the depth of cut and spindle speed are contributing 54.22 % and 38.6 % respectively among the selected input parameters on the cumulative output.
- 15 February 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
Effect of carbide ceramics and coke on the properties of dispersion strengthened aluminium‐silicon7‐magnesium hybrid composites
In this study, aluminium‐silicon7‐magnesium alloy was reinforced with carbide ceramics (silicon carbide and boron carbide) and coke microparticles. The composite samples (S1, S2, and S3) with 4 %, 8 %, and 12 % by weight of silicon carbide and boron carbide microparticles and 8 % by weight of coke micro particles respectively, were prepared through the ultrasonic assisted melt‐stir casting route. It was observed from the literature that only a few research works reported the cumulative effect of adding these micro‐particulate reinforcements within aluminium‐silicon7‐magnesium alloy. The microstructural evaluation revealed uniform dispersion of particulate reinforcements. Area energy dispersive x‐ray spectroscopy scan results proved the presence of the reinforcement particles as heterogeneous phases at distinct zones. The samples undergone tensile tests failed under the brittle fracture mode. The ultimate tensile strength of the composites improved by about 27.4 %, the % elongation improved by about 6.8 %, and Vickers microhardness dropped 1.9 % to the maximum. Dimples were observed in the fracture morphology analysis and it was mainly due to the mixed ductility of the sample S2. An abrasive wear mechanism was observed in the worn‐out sample S2. The wear rate decreased significantly with an increase in weight fraction of the reinforcements. Aluminium‐silicon7‐magnesium alloy was reinforced with carbide ceramics and coke micro particles and their properties were investigated in this study. There was a significant improvement in mechanical properties with the addition of the reinforcement materials, within the matrix. Wear rate decreased significantly with increase in weight fraction of the carbide ceramics and coke particles
- 15 February 2023
- Published by Wiley in Materialwissenschaft und Werkstofftechnik
Effect of carbide ceramics and coke on the properties of dispersion strengthened aluminium‐silicon7‐magnesium hybrid composites
In this study, aluminium‐silicon7‐magnesium alloy was reinforced with carbide ceramics (silicon carbide and boron carbide) and coke microparticles. The composite samples (S1, S2, and S3) with 4 %, 8 %, and 12 % by weight of silicon carbide and boron carbide microparticles and 8 % by weight of coke micro particles respectively, were prepared through the ultrasonic assisted melt‐stir casting route. It was observed from the literature that only a few research works reported the cumulative effect of adding these micro‐particulate reinforcements within aluminium‐silicon7‐magnesium alloy. The microstructural evaluation revealed uniform dispersion of particulate reinforcements. Area energy dispersive x‐ray spectroscopy scan results proved the presence of the reinforcement particles as heterogeneous phases at distinct zones. The samples undergone tensile tests failed under the brittle fracture mode. The ultimate tensile strength of the composites improved by about 27.4 %, the % elongation improved by about 6.8 %, and Vickers microhardness dropped 1.9 % to the maximum. Dimples were observed in the fracture morphology analysis and it was mainly due to the mixed ductility of the sample S2. An abrasive wear mechanism was observed in the worn‐out sample S2. The wear rate decreased significantly with an increase in weight fraction of the reinforcements. Aluminium‐silicon7‐magnesium alloy was reinforced with carbide ceramics and coke micro particles and their properties were investigated in this study. There was a significant improvement in mechanical properties with the addition of the reinforcement materials, within the matrix. Wear rate decreased significantly with increase in weight fraction of the carbide ceramics and coke particles
- 7 February 2022
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- Vol. 21 (04) , 711-726
Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials During Milling Operation
Duplex and super duplex materials have properties of both austenite and martensitic steels. Properties like hardness and toughness are very high for duplex grades, and it is difficult to machine. In this study, machining performance of DSS 2205 and SDSS 2507 was estimated during dry milling operation using CNC milling machine. The impact of feed rate, spindle speed and depth of cut on cutting force and surface roughness was estimated using 16 run experiments. Four levels of spindle speeds ranging from 1400 to 5600[ ]rpm, feed rate ranging from 50 to 200[ ]mm/min and depth of cut ranging from 0.35 to 1.40[ ]mm were considered for the experiment. Contour plots generated using Minitab 18 revealed that level of spindle speed, feed rate and depth of cut should be maintained at lower levels for achieving minimum cutting force. In order to achieve minimum surface roughness, lower levels of feed rate with moderate speed and lower depth of cut are to be preferred for both materials. While analyzing cutting force and surface roughness values, it was found that machinability of DSS 2205 was better than SDSS 2507 due to lower wt.% of chromium, molybdenum and nickel in DSS 2205 compared to SDSS 2507 material.
- 7 February 2022
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- Vol. 21 (04) , 711-726
Effect of Machining Parameters on Cutting Performance of DSS 2205 and SDSS 2507 Materials During Milling Operation
Duplex and super duplex materials have properties of both austenite and martensitic steels. Properties like hardness and toughness are very high for duplex grades, and it is difficult to machine. In this study, machining performance of DSS 2205 and SDSS 2507 was estimated during dry milling operation using CNC milling machine. The impact of feed rate, spindle speed and depth of cut on cutting force and surface roughness was estimated using 16 run experiments. Four levels of spindle speeds ranging from 1400 to 5600[ ]rpm, feed rate ranging from 50 to 200[ ]mm/min and depth of cut ranging from 0.35 to 1.40[ ]mm were considered for the experiment. Contour plots generated using Minitab 18 revealed that level of spindle speed, feed rate and depth of cut should be maintained at lower levels for achieving minimum cutting force. In order to achieve minimum surface roughness, lower levels of feed rate with moderate speed and lower depth of cut are to be preferred for both materials. While analyzing cutting force and surface roughness values, it was found that machinability of DSS 2205 was better than SDSS 2507 due to lower wt.% of chromium, molybdenum and nickel in DSS 2205 compared to SDSS 2507 material.
- 23 June 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 46 (12) , 12045-12063
Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM)
- 23 June 2021
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 46 (12) , 12045-12063
Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM)
- 20 May 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 6614-6617
Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials
- 20 May 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 6614-6617
Effect of machining parameters on cutting force during dry milling of 2205 DSS and 2507 SDSS materials