Dry Cold Forging of Pure Titanium Wire to Thin Plate with Use of β-SiC Coating Dies
Open Access
Abstract
Dense β-SiC coating with 3C-structure was utilized as a dry cold forging punch and core-die. Pure titanium T328H wires of industrial grade II were employed as a work material. No adhesion or galling of metallic titanium was detected on the contact interface between this β-SiC die and titanium work, even after this continuous forging process, up to a reduction in thickness by 70%. SEM (Scanning Electron Microscopy) and EDX (Electron Dispersive X-ray spectroscopy) were utilized to analyze this contact interface. A very thin titanium oxide layer was in situ formed in the radial direction from the center of the contact interface. Isolated carbon from β-SiC agglomerated and distributed in dots at the center of the initial contact interface. Raman spectroscopy was utilized, yielding the discovery that this carbon is unbound as a free carbon or not bound in SiC or TiC and that intermediate titanium oxides are formed with TiO2 as a tribofilm.Keywords
This publication has 11 references indexed in Scilit:
- Galling phenomena in metal formingFriction, 2020
- Thick β-SiC CVD-Coated SiC Die System for Dry Cold Forging of MetalsCrystals, 2020
- SiC-Coated SiC Die for Galling-Free Forging of Pure TitaniumMATERIALS TRANSACTIONS, 2020
- Application of response surface methodology to establish friction model of upset forgingAdvances in Mechanical Engineering, 2018
- Tribo-characterization of silicon doped and nano-structured DLC coatings by metal forming simulatorsManufacturing Letters, 2014
- Biomedical applications of titanium and its alloysJOM, 2008
- Application of Raman spectroscopy to characterization of carbon-based materialsTANSO, 2007
- Self-lubrication mechanism via the in situ formed lubricious oxide tribofilmWear, 2005
- Tribology of dry deep-drawing of various metal sheets with use of ceramics toolsSurface and Coatings Technology, 2004
- Self-lubrication of nitride ceramic coating by the chlorine ion implantationSurface and Coatings Technology, 2004