Optical sound pressure measurement using Fabry-pérot cavity for primary acoustic standards
Authors:
Preprint
- 11 September 2025
- preprint
- Published by Optica Publishing Group in Optica Open
Abstract
Optical sound pressure measurement is a promising technology to establish primary acoustic standards without reliance on specific types of microphones. We developed a precision optical sound pressure measurement system by combining a Fabry-pérot optical cavity, a phase-stabilized optical frequency comb, and a custom-made phasemeter. The optical cavity detects changes in the air’s refractive index induced by sound waves as changes in its resonance frequency. A continuous-wave laser frequency is stabilized at the resonance, and the frequency comb detects the changes in the laser frequency. The frequency changes are measured with high sensitivity and accuracy using a phasemeter that we developed. The sound pressures measured by this system agreed with the measurement value obtained using a reference microphone within 5% at sound pressure levels of 78 dB and 84 dB, within a frequency range of 100 Hz to 1 kHz. A systematic deviation of 2.6% was observed, with the optical system yielding higher values than the microphone. To identify the cause of this deviation, we performed vibration displacement measurements of the cavity mirrors and finite element analysis, which revealed that fluctuations in the optical path length due to insufficient fixation of the mirrors were responsible.Keywords
All Related Versions
- Published version: The Journal of the Acoustical Society of America, 158 (6), 4888.
This publication has 12 references indexed in Scilit:
- Precise sinusoidal signal extraction from noisy waveform in vibration calibrationMetrologia, 2022
- Low-noise optical measurement of sound using midfringe locked interferometer with differential detectionThe Journal of the Acoustical Society of America, 2021
- Gated photon correlation spectroscopy for acoustical particle velocity measurements in free-field conditionsThe Journal of the Acoustical Society of America, 2013
- Sound field reconstruction using acousto-optic tomographyThe Journal of the Acoustical Society of America, 2012
- Final technical report for key comparison CCAUV.A-K2Metrologia, 2009
- Long-term measurement of optical frequencies using a simple, robust and low-noise fiber based frequency combOptics Express, 2006
- Refractive index of air: new equations for the visible and near infraredApplied Optics, 1996
- The variation of the specific heat ratio and the speed of sound in air with temperature, pressure, humidity, and CO2 concentrationThe Journal of the Acoustical Society of America, 1993
- Laser phase and frequency stabilization using an optical resonatorApplied Physics B, 1983
- Laser beams and resonatorsProceedings of the IEEE, 1966