Microballoon Wall Thickness Effects on Properties of Syntactic Foams
Authors:
- 1 November 2004
- journal article
- research article
- Published by SAGE Publications in Journal of Cellular Plastics
- Vol. 40 (6) , 461-480
Abstract
A novel approach for changing the density of syntactic foams, while keeping the microballoon (hollow particles) volume fraction constant, is adopted in this work. This is achieved by selecting microballoons of the same size but with different wall thickness. Five types of microballoons are selected to fabricate syntactic foams. All the types of microballoons have about 40 mm mean particle sizes, but different wall thicknesses. This approach allows to maintain the same volume fractions of constituents and interfacial area while changing the density of syntactic foams. The fabricated syntactic foams are tested for their compressive properties in accordance to the ASTM D 695-96 standard. The results of the experimental investigation show a strong dependence of the compressive properties and the fracture characteristics of syntactic foams on the microballoon wall thickness. Shear cracking followed by cracking under secondary tensile stresses has been observed as the fracture mode. The present approach is found to be more effective than changing the microballoon volume fraction to change the syntactic foam density as it considerably increases the strength to the weight ratio.Keywords
This publication has 22 references indexed in Scilit:
- Processing and compressive strengths of syntactic foams with and without fibrous reinforcementsJournal of Applied Polymer Science, 2001
- Manufacture, characterisation and application of cellular metals and metal foamsProgress in Materials Science, 2001
- Experimental characterization and numerical simulations of a syntactic-foam/glass-fibre composite sandwichComposites Science and Technology, 2000
- Is Random Close Packing of Spheres Well Defined?Physical Review Letters, 2000
- An analysis of the effect of the diameters of glass microspheres on the mechanical behavior of glass-microsphere/epoxy-matrix compositesComposites Science and Technology, 1999
- Correlation of Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams With and Without FibersMaterials Characterization, 1999
- Effective Elastic Constants of Particulate Composites with Inhomogeneous InterphasesJournal of Composite Materials, 1998
- A predictive model for the mechanical behavior of particulate composites. Part II: Comparison of model predictions to literature dataPolymer Engineering & Science, 1993
- A predictive model for the mechanical behavior of particulate composites. Part I: Model derivationPolymer Engineering & Science, 1993
- The Influence of the Adhesion Bond between Matrix and Filler on the Tensile Strength of Particulate-Filled PolymersJournal of Reinforced Plastics and Composites, 1992