Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
- 7 January 2026
- journal article
- Published by Wiley in Fuel Cells
- Vol. 26 (1)
Abstract
Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs.Keywords
This publication has 30 references indexed in Scilit:
- Effect of noble metallic current collectors and contact layers on power density and polarization resistance of planar solid oxide fuel cellsInternational Journal of Hydrogen Energy, 2025
- Performance enhancement of protonic ceramic fuel cells using a Co-free La0.65Ca0.35FeO3– cathode composited with perovskite Ba(Ce,Zr)O3–-based oxidesCeramics International, 2024
- Improved durability of protonic ceramic fuel cells with BaZr0.8Yb0.2O3– electrolyte by introducing porous BaZr0.1Ce0.7Y0.1Yb0.1O3– buffer interlayerCeramics International, 2023
- Ultra-elevated power density and high energy efficiency of protonic ceramic fuel cells: Numerical and experimental resultsEnergy Conversion and Management, 2023
- Effect of cobalt content on electrochemical performance for La0.6Sr0.4CoxFe1-xO3-δ and BaZr0.8Yb0.2O3-δ composite cathodes in protonic ceramic fuel cellsCeramics International, 2023
- Tailoring the oxygen permeability of BaCo0.4Fe0.4Y0.2- AO3- (x= 0, 0.1; A: Zr, Mg, Zn) cubic perovskiteCeramics International, 2022
- Composite cathodes for protonic ceramic fuel cells: Rationales and materialsComposites Part B: Engineering, 2022
- High performance tubular protonic ceramic fuel cells via highly-scalable extrusion processInternational Journal of Hydrogen Energy, 2021
- Electrokinetic Proton Transport in Triple (H+/O2−/e−) Conducting Oxides as a Key Descriptor for Highly Efficient Protonic Ceramic Fuel CellsAdvanced Science, 2021
- Numerical analysis of current efficiency distributions in a protonic ceramic fuel cell using Nernst-Planck-Poisson modelInternational Journal of Hydrogen Energy, 2020