Yasunobu Mizutani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yasunobu Mizutani has a total of 129 co-authors. Here are the top co-authors by number of shared publications:
- Hirofumi Sumi
National Institute of Advanced Industrial Science and Technology
20 shared publications - Hiroyuki Shimada
Innovative Functional Materials Research Institute, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
20 shared publications - Yuki Yamaguchi
National Institute of Advanced Industrial Science and Technology
16 shared publications Kenji Ukai
Fundamental Research Department, Technical Research Institute, Toho Gas Co., Ltd
15 shared publications- Katsuhiro Nomura
National Institute of Advanced Industrial Science and Technology
10 shared publications Misuzu Yokoyama
Fundamental Research Department, Technical Research Institute, Toho Gas Co., Ltd
10 shared publications
Latest Publications
- 30 January 2026
- Published by Wiley in Energy Technology
- Vol. 14 (1)
Demonstration of High Durability of Co‐Free Cathode for Protonic Ceramic Fuel Cells in 3000 h Operation
For the practical application of protonic ceramic fuel cells (PCFCs), the development of highly durable PCFCs is essential, and long‐term operation of more than 1000 h must be demonstrated. In this study, a PCFC with a BaZr 0.8 Yb 0.2 O 3− δ (BZYb20) electrolyte, BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3– δ (BCZYYb) porous interlayer, and Co‐free La 0.65 Ca 0.35 FeO 3– δ (LCaF)‐BCZYYb composite cathode was fabricated. The fabricated PCFC exhibited good adhesion between each component. A long‐term durability test was performed on the fabricated PCFC upon constant current operation at 600°C. Initially, a slight voltage drop was observed in the first 500 h owing to an increase in the cathode polarization resistance. After that, the PCFC maintained a near‐constant voltage between 500 and 1000 h of operation. Upon 1000–3000 h of operation, a degradation rate of 0% kh −1 was achieved. No diffusion of all elements of the cathode into the BZYb20 electrolyte was observed by inserting of the BCZYYb interlayer. This study highlights the potential of Co‐free cathodes such as LCaF‐BCZYYb cathode in the fabrication of highly durable and stable PCFCs.
- 30 January 2026
- Published by Wiley in Energy Technology
- Vol. 14 (1)
Demonstration of High Durability of Co‐Free Cathode for Protonic Ceramic Fuel Cells in 3000 h Operation
For the practical application of protonic ceramic fuel cells (PCFCs), the development of highly durable PCFCs is essential, and long‐term operation of more than 1000 h must be demonstrated. In this study, a PCFC with a BaZr 0.8 Yb 0.2 O 3− δ (BZYb20) electrolyte, BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3– δ (BCZYYb) porous interlayer, and Co‐free La 0.65 Ca 0.35 FeO 3– δ (LCaF)‐BCZYYb composite cathode was fabricated. The fabricated PCFC exhibited good adhesion between each component. A long‐term durability test was performed on the fabricated PCFC upon constant current operation at 600°C. Initially, a slight voltage drop was observed in the first 500 h owing to an increase in the cathode polarization resistance. After that, the PCFC maintained a near‐constant voltage between 500 and 1000 h of operation. Upon 1000–3000 h of operation, a degradation rate of 0% kh −1 was achieved. No diffusion of all elements of the cathode into the BZYb20 electrolyte was observed by inserting of the BCZYYb interlayer. This study highlights the potential of Co‐free cathodes such as LCaF‐BCZYYb cathode in the fabrication of highly durable and stable PCFCs.
- 7 January 2026
- Published by Wiley in Fuel Cells
- Vol. 26 (1)
Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs.
- 7 January 2026
- Published by Wiley in Fuel Cells
- Vol. 26 (1)
Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs.
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 37874-37882
Enhanced proton conductivity in zirconium-rich perovskites via barium diffusion-assisted low-temperature sintering
BaCO 3 addition to NiO-BCZYYb4411 anode enables Ba diffusion-assisted sintering of BCZYYb4411 electrolytes at reduced temperatures (1200–1400 °C). Enhanced grain growth (∼10 μm) and many-fold conductivity improvement achieved.
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 37874-37882
Enhanced proton conductivity in zirconium-rich perovskites via barium diffusion-assisted low-temperature sintering
BaCO 3 addition to NiO-BCZYYb4411 anode enables Ba diffusion-assisted sintering of BCZYYb4411 electrolytes at reduced temperatures (1200–1400 °C). Enhanced grain growth (∼10 μm) and many-fold conductivity improvement achieved.
- Open Access
- 28 March 2025
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 93 (3) , 037006
Durability Improvement of Protonic Ceramic Fuel Cells by High Temperature Sintered Cobalt-Free (La,Ca)FeO3−δ Based Cathodes
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.
- 28 March 2025
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 93 (3) , 037006
Open AccessDurability Improvement of Protonic Ceramic Fuel Cells by High Temperature Sintered Cobalt-Free (La,Ca)FeO3−δ Based Cathodes
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3325
Theoretical Investigation on the Stability of Second Phase Formation in Ba(Zr, M)O3-Δ By Electrode Derived Ni and Co Elements
Ba(Zr,M)O3-δ is a perovskite-type oxide in which B-site is partially substituted by the dopant element M. It is expected to be applied as a solid electrolyte in proton-conducting ceramic fuel cells (PCFC). In recent years, there has been concern that the diffusion of Ni from the anode and Co from the cathode e into the solid electrolyte causes second phase formation, resulting in cell degradation. For example, depending on the type and amount of dopant, highly resistive phase, BaM 2NiO5, is reported to be precipitated [1]. Thus, understanding the precipitation conditions and precipitation mechanism of the second phase is essential to control cell degradation. Our previous studies have shown that the energetic stability of the precipitates is dominant in the formation of the precipitates by the anode-derived Ni. On the other hand, concerning the formation of cathode-derived Co precipitates, a complex oxide considered to be spinel precipitates at the grain boundary.However, not enough research has been done, and there is a possibility of other compounds precipitating as well, depending on conditions. In the present study, we referred to our previous experimental evaluation and performed first-principles calculations to theoretically examine the precipitation of the second phase associated with the solid solution of Ni and Co in Ba(Zr,M)O3. Anode-derived Ni reacts with dopant element M to form precipitates, and the formation tendency was found to be organized by the ionic radius of the dopant element M. Co from the cathode is thought to segregate with Ni at the grain boundary of the solid electrolyte, and this mechanism was investigated in terms of segregation energy and solid solution energy of Ni in spinel at the grain boundary. Furthermore, the formation energies of complex oxides involving Co for various M elements were evaluated by first-principles calculations to investigate the relative stability of the oxides under various equilibrium conditions organized by chemical potentials. The results suggest that BaCoO3 is stable in an oxidation atmosphere, and this trend was most pronounced for M=Yb. It is thought that BaCoO3 precipitation does not deplete dopants from the solid electrolyte matrix phase and is not likely to lead to degradation. At the conference, the detailed precipitation mechanism and the changes in the lattice constants of BaZrO3 due to the solid solution of different elements with respect to chemical expansion will be discussed. Acknowledgment This research result was obtained as a result of the commissioned work (Development of Ultra-High Efficiency Protonic Ceramic Fuel Cell Devices WP2, WP3, JPNP20003) of the New Energy and Industrial Technology Development Organization (NEDO). We would like to express our gratitude to all parties involved. Reference [1] T. Kuroha, Y. Niina, M. Shudo, G. Sakai, N.Matsunaga, T. Goto, K. Yamauchi, Y. Mikami, and Y. Okuyama, Optimum dopant of barium zirconate electrolyte for manufacturing of protonic ceramic fuel cells, Journal of power sources, 506 (15), 230134 (2021).
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3325
Theoretical Investigation on the Stability of Second Phase Formation in Ba(Zr, M)O3-Δ By Electrode Derived Ni and Co Elements
Ba(Zr,M)O3-δ is a perovskite-type oxide in which B-site is partially substituted by the dopant element M. It is expected to be applied as a solid electrolyte in proton-conducting ceramic fuel cells (PCFC). In recent years, there has been concern that the diffusion of Ni from the anode and Co from the cathode e into the solid electrolyte causes second phase formation, resulting in cell degradation. For example, depending on the type and amount of dopant, highly resistive phase, BaM 2NiO5, is reported to be precipitated [1]. Thus, understanding the precipitation conditions and precipitation mechanism of the second phase is essential to control cell degradation. Our previous studies have shown that the energetic stability of the precipitates is dominant in the formation of the precipitates by the anode-derived Ni. On the other hand, concerning the formation of cathode-derived Co precipitates, a complex oxide considered to be spinel precipitates at the grain boundary.However, not enough research has been done, and there is a possibility of other compounds precipitating as well, depending on conditions. In the present study, we referred to our previous experimental evaluation and performed first-principles calculations to theoretically examine the precipitation of the second phase associated with the solid solution of Ni and Co in Ba(Zr,M)O3. Anode-derived Ni reacts with dopant element M to form precipitates, and the formation tendency was found to be organized by the ionic radius of the dopant element M. Co from the cathode is thought to segregate with Ni at the grain boundary of the solid electrolyte, and this mechanism was investigated in terms of segregation energy and solid solution energy of Ni in spinel at the grain boundary. Furthermore, the formation energies of complex oxides involving Co for various M elements were evaluated by first-principles calculations to investigate the relative stability of the oxides under various equilibrium conditions organized by chemical potentials. The results suggest that BaCoO3 is stable in an oxidation atmosphere, and this trend was most pronounced for M=Yb. It is thought that BaCoO3 precipitation does not deplete dopants from the solid electrolyte matrix phase and is not likely to lead to degradation. At the conference, the detailed precipitation mechanism and the changes in the lattice constants of BaZrO3 due to the solid solution of different elements with respect to chemical expansion will be discussed. Acknowledgment This research result was obtained as a result of the commissioned work (Development of Ultra-High Efficiency Protonic Ceramic Fuel Cell Devices WP2, WP3, JPNP20003) of the New Energy and Industrial Technology Development Organization (NEDO). We would like to express our gratitude to all parties involved. Reference [1] T. Kuroha, Y. Niina, M. Shudo, G. Sakai, N.Matsunaga, T. Goto, K. Yamauchi, Y. Mikami, and Y. Okuyama, Optimum dopant of barium zirconate electrolyte for manufacturing of protonic ceramic fuel cells, Journal of power sources, 506 (15), 230134 (2021).
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3323
(Invited) Investigation of Co-Free Cathode Composited with Proton Conductors for Protonic Ceramic Fuel Cells with Yb-Doped BaZrO3 Electrolyte
Protonic ceramic fuel cells (PCFCs) are expected to gain significant advantage from the use of Co-free cathodes. This shift can lead to reduced manufacturing costs and enhance durability performance. In our previous study, the investigation compared the power generation characteristics of PCFCs with BaZr0.8Yb0.2O3-δ (BZYb) electrolytes utilizing cathodes composed of La0.6Sr0.4FeO3-δ (LSF) as a Co-free cathode material and La0.6Sr0.4CoO3-δ (LSC) or La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) as Co-containing cathode materials composited with BZYb. Consequently, the PCFC with an LSF-BZYb cathode exhibited lower performance compared to the PCFCs with LSC-BZYb and LSCF-BZYb cathodes due to the higher electrode polarization resistance. In this study, the challenges associated with achieving high-performance Co-free cathodes that can match the performance of Co-containing cathodes are presented, along with the mechanism to enhance performance. To improve performance, the use of La0.65Ca0.35FeO3-δ (LCaF), as a Co-free cathode, in addition to LSF, which has been reported to demonstrate high performance in SOFCs, was explored. Additionally, LCaF was composited with BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), known for its higher proton conductivity and easier sinterability than BZYb. When comparing the power generation characteristics of PCFCs with LCaF-BZYb and LSF-BZYb cathodes, the PCFC with LCaF-BZYb cathode exhibited higher ohmic and electrode polarization resistances. These results were attributed to weak adhesion between the electrolyte and cathode, resulting in lower performance than the PCFC with LSF-BZYb cathode. Furthermore, when comparing the power generation characteristic of the PCFC with a composite cathode of LCaF and BCZYYb with the LCaF-BZYb cathode, the ohmic and electrode polarization resistances were significantly lower. This improvement was attributed to the advanced sintering of BCZYYb and the connected percolation of the proton-conducting network. Consequently, the performance of the PCFC with the LCaF-BCZYYb cathode surpassed that of the LCaF-BZYb cathode and was comparable to Co-containing cathodes such as LSC-BCZYYb cathode. In conclusion, for Co-free cathodes in PCFCs, it is crucial to composite them with proton conductors possessing better sinterability, such as BCZYYb, to achieve higher performance. Acknowledgements: This work is based on the results obtained from a project (JPNP20003) commissioned by the New Energy and Industrial Technology Development Organization (NEDO), Japan.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3323
(Invited) Investigation of Co-Free Cathode Composited with Proton Conductors for Protonic Ceramic Fuel Cells with Yb-Doped BaZrO3 Electrolyte
Protonic ceramic fuel cells (PCFCs) are expected to gain significant advantage from the use of Co-free cathodes. This shift can lead to reduced manufacturing costs and enhance durability performance. In our previous study, the investigation compared the power generation characteristics of PCFCs with BaZr0.8Yb0.2O3-δ (BZYb) electrolytes utilizing cathodes composed of La0.6Sr0.4FeO3-δ (LSF) as a Co-free cathode material and La0.6Sr0.4CoO3-δ (LSC) or La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) as Co-containing cathode materials composited with BZYb. Consequently, the PCFC with an LSF-BZYb cathode exhibited lower performance compared to the PCFCs with LSC-BZYb and LSCF-BZYb cathodes due to the higher electrode polarization resistance. In this study, the challenges associated with achieving high-performance Co-free cathodes that can match the performance of Co-containing cathodes are presented, along with the mechanism to enhance performance. To improve performance, the use of La0.65Ca0.35FeO3-δ (LCaF), as a Co-free cathode, in addition to LSF, which has been reported to demonstrate high performance in SOFCs, was explored. Additionally, LCaF was composited with BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), known for its higher proton conductivity and easier sinterability than BZYb. When comparing the power generation characteristics of PCFCs with LCaF-BZYb and LSF-BZYb cathodes, the PCFC with LCaF-BZYb cathode exhibited higher ohmic and electrode polarization resistances. These results were attributed to weak adhesion between the electrolyte and cathode, resulting in lower performance than the PCFC with LSF-BZYb cathode. Furthermore, when comparing the power generation characteristic of the PCFC with a composite cathode of LCaF and BCZYYb with the LCaF-BZYb cathode, the ohmic and electrode polarization resistances were significantly lower. This improvement was attributed to the advanced sintering of BCZYYb and the connected percolation of the proton-conducting network. Consequently, the performance of the PCFC with the LCaF-BCZYYb cathode surpassed that of the LCaF-BZYb cathode and was comparable to Co-containing cathodes such as LSC-BCZYYb cathode. In conclusion, for Co-free cathodes in PCFCs, it is crucial to composite them with proton conductors possessing better sinterability, such as BCZYYb, to achieve higher performance. Acknowledgements: This work is based on the results obtained from a project (JPNP20003) commissioned by the New Energy and Industrial Technology Development Organization (NEDO), Japan.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3336
Influence of Minor Electronic Conduction in the Electrolyte on the Impedance Response of Proton Conducting Ceramic Fuel Cell Cathode
Proton conducting ceramic fuel cell (PCFC) is expected as a next generation fuel cell operating with high energy conversion efficiency at intermediate temperatures. In order to realize the practical application of PCFC, one of big challenges is to reduce the polarization resistance at the cathode [1]. So far, a various kinds of cathode materials have been examined. For investigating the electrode reaction of PCFC cathode, electrochemical impedance spectroscopy (EIS) is very often utilized. In most cases, the polarization resistance is evaluated from the EIS response by assuming the transport number of proton in the electrolyte as unity. However, typical PCFC electrolytes shows electron hole conduction in addition to protonic conduction, particularly under higher oxygen partial pressures and higher temperatures [2]. Thus the transport number of proton cannot be always regarded as unity even under fuel cell operation conditions [3]. The existence of such minor electronic conduction in the electrolyte may result in underestimation of the polarization resistance by conventional electrochemical analyses including EIS [4], although little attention has been paid to how significant electronic conduction in the electrolyte is to the electrochemical response. In this study, we tried to experimentally understand influence of minor electronic conduction in the electrolyte on the impedance response of PCFC cathode. For the purpose mentioned above, EIS measurements were applied to investigate the reaction at a porous Pt electrode on a typical proton-conducting electrolyte, BaZr0.8Yb0.2O3-δ (BZYb), as a model PCFC cathode. A three terminal electrochemical cell was prepared on the sintered electrolyte pellet with 1 mm of thickness. Porous Pt electrodes as a working electrode (WE) and a counter electrode (CE) were placed on both sides of the pellet by painting the Pt paste and firing them at 1273 K. A porous Pt electrode as a reference electrode (RE) was set on the lateral side of the pellet. EIS measurements (AC amplitude: 30 mV, frequency; 106 to 10-3 Hz) were carried out at 773-973 K under 2% humidified 10-4-1 bar O2 for the WE and 2% humidified 10-2-1 bar H2 or 10-4-1 bar O2 for the CE/RE. Typical impedance spectra obtained at 973 K under various p(O2) for WE and a fixed atmosphere for CE/RE is presented in Fig. 1. As seen in this figure, some characteristic responses were observed; (i) the shape of the Nyquist plots was not typical semi-circular and a linear rise in the high frequency region was seen, (ii) the frequency corresponding to the impedance response was much slower than that for a typical gas reaction at a Pt electrode, (iii) the impedance response, which may correspond to polarization resistance, was relatively smaller than that of a typical gas reaction at a Pt gas electrode, and (iv) the x-intercept of the Nyquist plot, which is generally interpreted as the ohmic resistance of the electrolyte, shifted toward higher resistance side as p(O2) decreased. Moreover, when EIS measurements were performed under a fixed atmosphere for WE and various p(H2) or p(H2) for CE/RE, the impedance response of WE became drastically smaller with increasing p(O2) or decreasing p(H2) despite not changing the atmosphere of WE. These characteristic EIS responses were all considered due to influence of minor electronic hole conduction associated with the change in oxygen nonstoichiometry of the electrolyte. For instance, the slow frequency response could be well explained by assuming the oxygen nonstoichiometry change of the electrolyte due to the electrode polarization. These results tell us that EIS measurements tend to underestimate the polarization resistance of PCFC cathode because of the influence of minor electronic conduction in the electrolyte, and, in most cases, the estimation of the polarization resistance by fitting the impedance spectra assuming a conventional simple R//C or R//CPE circuit is not appropriate. References [1] T. Onishi,. et al., J. Electrochem. Soc., 162(3), F250 (2015). [2] T. Kuroha, et al., J. Power Sources., 506, 230134 (2021). [3] T. Nakamura et al., J. Mater. Chem. A, 6, 15771 (2018). [4] D. Poetzsch, et al., J. Electrochem. Soc., 162 (9), F939-F950 (2015). Acknowledgments A part of this work was supported by New Energy and Industrial Technology Development Organization (NEDO), Japan. Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (48) , 3336
Influence of Minor Electronic Conduction in the Electrolyte on the Impedance Response of Proton Conducting Ceramic Fuel Cell Cathode
Proton conducting ceramic fuel cell (PCFC) is expected as a next generation fuel cell operating with high energy conversion efficiency at intermediate temperatures. In order to realize the practical application of PCFC, one of big challenges is to reduce the polarization resistance at the cathode [1]. So far, a various kinds of cathode materials have been examined. For investigating the electrode reaction of PCFC cathode, electrochemical impedance spectroscopy (EIS) is very often utilized. In most cases, the polarization resistance is evaluated from the EIS response by assuming the transport number of proton in the electrolyte as unity. However, typical PCFC electrolytes shows electron hole conduction in addition to protonic conduction, particularly under higher oxygen partial pressures and higher temperatures [2]. Thus the transport number of proton cannot be always regarded as unity even under fuel cell operation conditions [3]. The existence of such minor electronic conduction in the electrolyte may result in underestimation of the polarization resistance by conventional electrochemical analyses including EIS [4], although little attention has been paid to how significant electronic conduction in the electrolyte is to the electrochemical response. In this study, we tried to experimentally understand influence of minor electronic conduction in the electrolyte on the impedance response of PCFC cathode. For the purpose mentioned above, EIS measurements were applied to investigate the reaction at a porous Pt electrode on a typical proton-conducting electrolyte, BaZr0.8Yb0.2O3-δ (BZYb), as a model PCFC cathode. A three terminal electrochemical cell was prepared on the sintered electrolyte pellet with 1 mm of thickness. Porous Pt electrodes as a working electrode (WE) and a counter electrode (CE) were placed on both sides of the pellet by painting the Pt paste and firing them at 1273 K. A porous Pt electrode as a reference electrode (RE) was set on the lateral side of the pellet. EIS measurements (AC amplitude: 30 mV, frequency; 106 to 10-3 Hz) were carried out at 773-973 K under 2% humidified 10-4-1 bar O2 for the WE and 2% humidified 10-2-1 bar H2 or 10-4-1 bar O2 for the CE/RE. Typical impedance spectra obtained at 973 K under various p(O2) for WE and a fixed atmosphere for CE/RE is presented in Fig. 1. As seen in this figure, some characteristic responses were observed; (i) the shape of the Nyquist plots was not typical semi-circular and a linear rise in the high frequency region was seen, (ii) the frequency corresponding to the impedance response was much slower than that for a typical gas reaction at a Pt electrode, (iii) the impedance response, which may correspond to polarization resistance, was relatively smaller than that of a typical gas reaction at a Pt gas electrode, and (iv) the x-intercept of the Nyquist plot, which is generally interpreted as the ohmic resistance of the electrolyte, shifted toward higher resistance side as p(O2) decreased. Moreover, when EIS measurements were performed under a fixed atmosphere for WE and various p(H2) or p(H2) for CE/RE, the impedance response of WE became drastically smaller with increasing p(O2) or decreasing p(H2) despite not changing the atmosphere of WE. These characteristic EIS responses were all considered due to influence of minor electronic hole conduction associated with the change in oxygen nonstoichiometry of the electrolyte. For instance, the slow frequency response could be well explained by assuming the oxygen nonstoichiometry change of the electrolyte due to the electrode polarization. These results tell us that EIS measurements tend to underestimate the polarization resistance of PCFC cathode because of the influence of minor electronic conduction in the electrolyte, and, in most cases, the estimation of the polarization resistance by fitting the impedance spectra assuming a conventional simple R//C or R//CPE circuit is not appropriate. References [1] T. Onishi,. et al., J. Electrochem. Soc., 162(3), F250 (2015). [2] T. Kuroha, et al., J. Power Sources., 506, 230134 (2021). [3] T. Nakamura et al., J. Mater. Chem. A, 6, 15771 (2018). [4] D. Poetzsch, et al., J. Electrochem. Soc., 162 (9), F939-F950 (2015). Acknowledgments A part of this work was supported by New Energy and Industrial Technology Development Organization (NEDO), Japan. Figure 1
- Open Access
- 11 May 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (19) , 37260-37267
Machine learning optimization for a novel process of acid-base chemical densification of BaZrO3 ceramics
- 11 May 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (19) , 37260-37267
Open AccessMachine learning optimization for a novel process of acid-base chemical densification of BaZrO3 ceramics
- Open Access
- 5 March 2024
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 44 (10) , 5872-5884
Near-room-temperature fabrication of dense BaZrO3 ceramic via acid–base chemical densification
- 5 March 2024
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 44 (10) , 5872-5884
Open AccessNear-room-temperature fabrication of dense BaZrO3 ceramic via acid–base chemical densification
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (54) , 315
Evaluation of Hydrogen Ions Flowing through Protonic Ceramic Fuel Cell Using Ytterbium-Doped Barium Zirconate as Electrolyte
Protonic ceramic fuel cells (PCFCs) are clean power generation devices that do not emit carbon dioxide, and generate electricity when protons (hydrogen ions) pass from the fuel electrode through the electrolyte to form water vapor at the air electrode. As a fuel cell, PCFC is expected to be a highly efficient fuel cell because it can operate at medium to low temperatures of around 600°C and no fuel dilution occurs. However, proton-conducting ceramics can conduct not only protons but also a small amount of holes, which can cause electron leakage and lower the power generation efficiency. Therefore, it is very important to understand the ionic and hole conductivity in a fuel cell. To evaluate the electronic leakage of PCFC, the amount of proton current flowed in PCFC can be measured by an apparatus developed based on the electromotive force of an electrochemical cell using 10 mol% In-doped CaZrO3 (hydrogen sensor) and Y stabilized zirconia (oxygen sensor). Water vapor pressure on cathode was change when hydrogen ion passes thorough PCFC. The current of hydrogen ion can be determined by monitoring water vapor pressure. We measured the current of hydrogen flowing through protonic ceramic fuel cell using ytterbium-doped barium zirconate as electrolyte. Hydrogen ion and hole were found to leak at OCV at 700°C. Then electronic leakage was estimated form the current of hydrogen ion and external current. The electronic leakage was found to be suppressed with increasing electrolyte film thickness. On the other hand, no leakage of hydrogen and holes was observed at 500°C.
- 28 August 2023
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2023-01 (54) , 315
Evaluation of Hydrogen Ions Flowing through Protonic Ceramic Fuel Cell Using Ytterbium-Doped Barium Zirconate as Electrolyte
Protonic ceramic fuel cells (PCFCs) are clean power generation devices that do not emit carbon dioxide, and generate electricity when protons (hydrogen ions) pass from the fuel electrode through the electrolyte to form water vapor at the air electrode. As a fuel cell, PCFC is expected to be a highly efficient fuel cell because it can operate at medium to low temperatures of around 600°C and no fuel dilution occurs. However, proton-conducting ceramics can conduct not only protons but also a small amount of holes, which can cause electron leakage and lower the power generation efficiency. Therefore, it is very important to understand the ionic and hole conductivity in a fuel cell. To evaluate the electronic leakage of PCFC, the amount of proton current flowed in PCFC can be measured by an apparatus developed based on the electromotive force of an electrochemical cell using 10 mol% In-doped CaZrO3 (hydrogen sensor) and Y stabilized zirconia (oxygen sensor). Water vapor pressure on cathode was change when hydrogen ion passes thorough PCFC. The current of hydrogen ion can be determined by monitoring water vapor pressure. We measured the current of hydrogen flowing through protonic ceramic fuel cell using ytterbium-doped barium zirconate as electrolyte. Hydrogen ion and hole were found to leak at OCV at 700°C. Then electronic leakage was estimated form the current of hydrogen ion and external current. The electronic leakage was found to be suppressed with increasing electrolyte film thickness. On the other hand, no leakage of hydrogen and holes was observed at 500°C.