Hiroyuki Shimada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hiroyuki Shimada has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Hirofumi Sumi
National Institute of Advanced Industrial Science and Technology
44 shared publications - Yuki Yamaguchi
National Institute of Advanced Industrial Science and Technology
29 shared publications - Yasunobu Mizutani
National Institute of Advanced Industrial Science and Technology
20 shared publications Toshiaki Yamaguchi
Inorganic Functional Materials Research Institute, Department of Materials and Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), 2266-98 Anagahora, Shimo-shidami, Moriyama-ku, Nagoya, Aichi, 463-8560, Japan
17 shared publicationsKatsuhiro Nomura
15 shared publications- Yoshinobu Fujishiro
National Institute of Advanced Industrial Science and Technology (AIST)
15 shared publications
Latest Publications
- 30 January 2026
- Published by Wiley in Energy Technology
- Vol. 14 (1)
Demonstration of High Durability of Co‐Free Cathode for Protonic Ceramic Fuel Cells in 3000 h Operation
For the practical application of protonic ceramic fuel cells (PCFCs), the development of highly durable PCFCs is essential, and long‐term operation of more than 1000 h must be demonstrated. In this study, a PCFC with a BaZr 0.8 Yb 0.2 O 3− δ (BZYb20) electrolyte, BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3– δ (BCZYYb) porous interlayer, and Co‐free La 0.65 Ca 0.35 FeO 3– δ (LCaF)‐BCZYYb composite cathode was fabricated. The fabricated PCFC exhibited good adhesion between each component. A long‐term durability test was performed on the fabricated PCFC upon constant current operation at 600°C. Initially, a slight voltage drop was observed in the first 500 h owing to an increase in the cathode polarization resistance. After that, the PCFC maintained a near‐constant voltage between 500 and 1000 h of operation. Upon 1000–3000 h of operation, a degradation rate of 0% kh −1 was achieved. No diffusion of all elements of the cathode into the BZYb20 electrolyte was observed by inserting of the BCZYYb interlayer. This study highlights the potential of Co‐free cathodes such as LCaF‐BCZYYb cathode in the fabrication of highly durable and stable PCFCs.
- 30 January 2026
- Published by Wiley in Energy Technology
- Vol. 14 (1)
Demonstration of High Durability of Co‐Free Cathode for Protonic Ceramic Fuel Cells in 3000 h Operation
For the practical application of protonic ceramic fuel cells (PCFCs), the development of highly durable PCFCs is essential, and long‐term operation of more than 1000 h must be demonstrated. In this study, a PCFC with a BaZr 0.8 Yb 0.2 O 3− δ (BZYb20) electrolyte, BaCe 0.7 Zr 0.1 Y 0.1 Yb 0.1 O 3– δ (BCZYYb) porous interlayer, and Co‐free La 0.65 Ca 0.35 FeO 3– δ (LCaF)‐BCZYYb composite cathode was fabricated. The fabricated PCFC exhibited good adhesion between each component. A long‐term durability test was performed on the fabricated PCFC upon constant current operation at 600°C. Initially, a slight voltage drop was observed in the first 500 h owing to an increase in the cathode polarization resistance. After that, the PCFC maintained a near‐constant voltage between 500 and 1000 h of operation. Upon 1000–3000 h of operation, a degradation rate of 0% kh −1 was achieved. No diffusion of all elements of the cathode into the BZYb20 electrolyte was observed by inserting of the BCZYYb interlayer. This study highlights the potential of Co‐free cathodes such as LCaF‐BCZYYb cathode in the fabrication of highly durable and stable PCFCs.
- 7 January 2026
- Published by Wiley in Fuel Cells
- Vol. 26 (1)
Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs.
- 7 January 2026
- Published by Wiley in Fuel Cells
- Vol. 26 (1)
Electrochemical Performance of Highly Oxygen‐Permeable Ba(Co,Fe,Y)O 3 ‐Based Cathodes in Protonic Ceramic Fuel Cells
Protonic ceramic fuel cells (PCFCs) have high energy conversion efficiencies and can be employed as next‐generation fuel cells. However, novel cathode materials with high electrochemical performances at low operating temperatures are required to practically apply PCFCs. BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3– δ (BCFZrY) is a promising material for PCFC cathodes owing to its low electrode polarization resistance ( R p ). Herein, instead of Zr doping, BaCo 0.4 Fe 0.4 A 0.1 Y 0.1 O 3– δ (BCF A Y) compounds, where A represents Ti, Mg, or Zn, were evaluated as PCFC cathode materials. BCF A Y ( A : Ti, Mg, or Zn) compounds have a higher oxygen permeability than BCFZrY. The electrochemical properties and power generation performance of the PCFCs with BCF A Y cathodes were measured and compared with those of PCFCs with BCFZrY cathodes. The PCFC with a BCFMgY cathode exhibited the lowest R p , leading to the highest power density, that is, 0.80 W cm −2 at 600°C. In addition, for all PCFCs with BCFY‐based cathodes, the reciprocal area‐specific resistances of R p and oxygen permeability fluxes of the cathode materials had an approximately proportional relationship. Therefore, it was confirmed that PCFC cathodes with a high oxygen permeability had a low cathode polarization resistance, which significantly enhanced the power generation performance of PCFCs.
- 25 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 661
Simultaneous electrolyte densification and anode porosity control in BZYb-based protonic ceramic fuel cells via BaCO3 addition
- 25 October 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 661
Simultaneous electrolyte densification and anode porosity control in BZYb-based protonic ceramic fuel cells via BaCO3 addition
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 37874-37882
Enhanced proton conductivity in zirconium-rich perovskites via barium diffusion-assisted low-temperature sintering
BaCO 3 addition to NiO-BCZYYb4411 anode enables Ba diffusion-assisted sintering of BCZYYb4411 electrolytes at reduced temperatures (1200–1400 °C). Enhanced grain growth (∼10 μm) and many-fold conductivity improvement achieved.
- 4 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (44) , 37874-37882
Enhanced proton conductivity in zirconium-rich perovskites via barium diffusion-assisted low-temperature sintering
BaCO 3 addition to NiO-BCZYYb4411 anode enables Ba diffusion-assisted sintering of BCZYYb4411 electrolytes at reduced temperatures (1200–1400 °C). Enhanced grain growth (∼10 μm) and many-fold conductivity improvement achieved.
- Open Access
- 2 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (28) , 40639-40649
High-Performance Protonic Ceramic Fuel Cell with Ytterbium-Doped Barium Zirconate: Reducing Cathode Polarization by Improving Electrolyte Surface Condition
Protonic ceramic fuel cells (PCFCs) have great potential to realize ultrahigh energy-conversion efficiency, but higher power density is required for future commercialization. The present work reports the effect of the electrolyte surface condition related to chemical composition such as stoichiometry and element distribution on cathode performance as a key for high-performance PCFCs. In our PCFCs, Ce-free Yb-doped BaZrO3 (BZYb20) electrolytes are prepared using two BZYb20 raw powder materials with different A/B ratios, i.e., Ba0.97Zr0.8Yb0.2O3-δ (Cell-97) and Ba0.99Zr0.8Yb0.2O3-δ (Cell-99). These PCFCs exhibit different element distributions on their BZYb20 electrolyte surfaces, namely, a heterogeneous element distribution with segregation of Yb2O3 for Cell-97 and a homogeneous distribution for Cell-99. The maximum power density of Cell-99 is higher than that of Cell-97 and reaches exceptionally high values, e.g., ∼1.3 W cm-2 at 600 °C and ∼0.7 W cm-2 at 500 °C, which are the highest attained for PCFCs with Ce-free BaZrO3-based electrolytes. The distribution of relaxation times and fitting analysis reveals that the cathode polarization resistance of Cell-99 is much lower than that of Cell-97 even when using the same cathode material. In conclusion, an optimal electrolyte surface condition significantly reduces cathode polarization resistance, leading to the achievement of high-performance PCFCs.
- 2 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (28) , 40639-40649
Open AccessHigh-Performance Protonic Ceramic Fuel Cell with Ytterbium-Doped Barium Zirconate: Reducing Cathode Polarization by Improving Electrolyte Surface Condition
Protonic ceramic fuel cells (PCFCs) have great potential to realize ultrahigh energy-conversion efficiency, but higher power density is required for future commercialization. The present work reports the effect of the electrolyte surface condition related to chemical composition such as stoichiometry and element distribution on cathode performance as a key for high-performance PCFCs. In our PCFCs, Ce-free Yb-doped BaZrO3 (BZYb20) electrolytes are prepared using two BZYb20 raw powder materials with different A/B ratios, i.e., Ba0.97Zr0.8Yb0.2O3-δ (Cell-97) and Ba0.99Zr0.8Yb0.2O3-δ (Cell-99). These PCFCs exhibit different element distributions on their BZYb20 electrolyte surfaces, namely, a heterogeneous element distribution with segregation of Yb2O3 for Cell-97 and a homogeneous distribution for Cell-99. The maximum power density of Cell-99 is higher than that of Cell-97 and reaches exceptionally high values, e.g., ∼1.3 W cm-2 at 600 °C and ∼0.7 W cm-2 at 500 °C, which are the highest attained for PCFCs with Ce-free BaZrO3-based electrolytes. The distribution of relaxation times and fitting analysis reveals that the cathode polarization resistance of Cell-99 is much lower than that of Cell-97 even when using the same cathode material. In conclusion, an optimal electrolyte surface condition significantly reduces cathode polarization resistance, leading to the achievement of high-performance PCFCs.
- 14 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 127, 286-294
Effect of noble metallic current collectors and contact layers on power density and polarization resistance of planar solid oxide fuel cells
- 14 April 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 127, 286-294
Effect of noble metallic current collectors and contact layers on power density and polarization resistance of planar solid oxide fuel cells
- Open Access
- 28 March 2025
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 93 (3) , 037006
Durability Improvement of Protonic Ceramic Fuel Cells by High Temperature Sintered Cobalt-Free (La,Ca)FeO3−δ Based Cathodes
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.
- 28 March 2025
- Published by The Electrochemical Society of Japan in Electrochemistry
- Vol. 93 (3) , 037006
Open AccessDurability Improvement of Protonic Ceramic Fuel Cells by High Temperature Sintered Cobalt-Free (La,Ca)FeO3−δ Based Cathodes
Access full-text academic articles: J-STAGE is an online platform for Japanese academic journals.
- Open Access
- 8 March 2025
- Published by Springer Nature in Communications Chemistry
- Vol. 8 (1) , 1-8
Oxygen reduction kinetics of high performance BaCo0.4Fe0.4M0.1Y0.1O3-δ (M = Mg, Zr) positrode for protonic ceramic fuel cells
Protonic ceramic fuel cells (PCFCs) should exhibit high performance at intermediate temperatures in the range of 400–600 °C. To reduce the operating temperature, more active air electrodes (positrodes) are needed. In the present work, BaCo0.4Fe0.4Mg0.1Y0.1O3-δ (BCFMY) is investigated as a positrode material for application in PCFCs as well as solid oxide fuel cells (SOFCs). For SOFCs, the polarization resistance ascribed to the oxygen reduction reaction is proportional to pO2−1/4 (pO2: oxygen partial pressure), suggesting that the rate-determining process is the charge transfer on the mixed ionic-electronic conductors. For PCFCs, this polarization resistance is proportional to pO2−1/2, suggesting that the rate-determining process is the oxygen dissociation. The total polarization resistance for the PCFCs using the BCFMY positrode is 0.066 Ωcm2 at 600 °C, lower than that using the BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) positrode. The higher oxygen nonstoichiometry of BCFMY promotes the oxygen dissociation process on the PCFC positrode surface.
- 8 March 2025
- Published by Springer Nature in Communications Chemistry
- Vol. 8 (1) , 1-8
Open AccessOxygen reduction kinetics of high performance BaCo0.4Fe0.4M0.1Y0.1O3-δ (M = Mg, Zr) positrode for protonic ceramic fuel cells
Protonic ceramic fuel cells (PCFCs) should exhibit high performance at intermediate temperatures in the range of 400–600 °C. To reduce the operating temperature, more active air electrodes (positrodes) are needed. In the present work, BaCo0.4Fe0.4Mg0.1Y0.1O3-δ (BCFMY) is investigated as a positrode material for application in PCFCs as well as solid oxide fuel cells (SOFCs). For SOFCs, the polarization resistance ascribed to the oxygen reduction reaction is proportional to pO2−1/4 (pO2: oxygen partial pressure), suggesting that the rate-determining process is the charge transfer on the mixed ionic-electronic conductors. For PCFCs, this polarization resistance is proportional to pO2−1/2, suggesting that the rate-determining process is the oxygen dissociation. The total polarization resistance for the PCFCs using the BCFMY positrode is 0.066 Ωcm2 at 600 °C, lower than that using the BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY) positrode. The higher oxygen nonstoichiometry of BCFMY promotes the oxygen dissociation process on the PCFC positrode surface.
- 10 January 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 631
Enhanced PCFC performance via anode additive BaCO3–Induced grain growth in BZYb electrolyte
- 10 January 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 631
Enhanced PCFC performance via anode additive BaCO3–Induced grain growth in BZYb electrolyte
- 3 December 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (50) , 34324-34332
Hydrogen-Assisted Mg Intercalation into 2H-TaS2
Intercalation reactions are highly dependent on the electronic and structural relationships between host and guest materials. It is difficult for divalent ions, such as Mg, to undergo intercalation reactions compared with monovalent cations. However, further development of synthetic techniques for controlling divalent ions is strongly demanded to advance applied chemistry and fundamental physics. In this study, the cointercalation of Mg and H into the transition-metal chalcogenide TaS2 was utilized to obtain bulk polycrystalline MgxHyTaS2. Introduced H can be extracted via postannealing at approximately 400 °C without altering the crystal structure. This study clarified the relationship between superconducting properties and electronic carrier density from the perspectives of calculations and experiments, along with the advantages of using hydride as a multivalent intercalation reaction.
- 3 December 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (50) , 34324-34332
Hydrogen-Assisted Mg Intercalation into 2H-TaS2
Intercalation reactions are highly dependent on the electronic and structural relationships between host and guest materials. It is difficult for divalent ions, such as Mg, to undergo intercalation reactions compared with monovalent cations. However, further development of synthetic techniques for controlling divalent ions is strongly demanded to advance applied chemistry and fundamental physics. In this study, the cointercalation of Mg and H into the transition-metal chalcogenide TaS2 was utilized to obtain bulk polycrystalline MgxHyTaS2. Introduced H can be extracted via postannealing at approximately 400 °C without altering the crystal structure. This study clarified the relationship between superconducting properties and electronic carrier density from the perspectives of calculations and experiments, along with the advantages of using hydride as a multivalent intercalation reaction.