Sensitivity Analysis on Turbine Blade Temperature Distribution Using Conjugate Heat Transfer Simulation
- 20 September 2013
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 136 (1) , 011001
Abstract
Heat transfer parameters are the most critical variables affecting turbine blade life. Therefore, accurately predicting heat transfer parameters is essential. In this study, for precise prediction of the blade temperature distribution, a conjugate heat transfer procedure is used. This procedure involves three different physical aspects: flow and heat transfer in external domain and internal cooling passages and conduction within metal blade. For the external flow simulation and conduction within metal, three-dimensional solvers are used. However, three-dimensional modeling of blade cooling passages is time-consuming because of complex cooling passage geometries. Therefore, in the current work, a one-dimensional network method is used for the simulation of cooling passages. For validation of the numerical procedure, simulation results are compared with the available experimental data for a C3X vane. Results show good agreement against experimental data. The present paper investigates uncertainties of some parameters that affect turbine blade heat transfer, namely, (1) turbine inlet temperature and pressure, (2) upstream stator coolant mass flow rate and temperature, (3) rotor shroud heat transfer coefficient and fluid temperature over shroud, (4) rotor coolant inlet pressure and temperature (as a result of secondary air system), (5) blade metal thermal conductivity, and (6) blade coating thickness and thermal conductivity. Results show that turbine inlet temperature, pressure drop and temperature rise in the secondary air system (SAS) and coating parameters have significant effect on the blade temperature.Keywords
This publication has 8 references indexed in Scilit:
- Design and Optimization of the Internal Cooling Channels of a High Pressure Turbine Blade—Part I: MethodologyJournal of Turbomachinery, 2010
- Coupled Heat Transfer Simulation of a High-pressure Turbine Nozzle Guide VaneChinese Journal of Aeronautics, 2009
- Conjugate Heat Transfer Analysis of a Cooled Turbine Vane Using the V2F Turbulence ModelJournal of Turbomachinery, 2006
- Film Cooling Effectiveness and Heat Transfer on the Trailing Edge Cutback of Gas Turbine Airfoils With Various Internal Cooling DesignsJournal of Turbomachinery, 2005
- Distributed Porosity as a Control Parameter for Oxide Thermal Barriers Made by Physical Vapor DepositionJournal of the American Ceramic Society, 2001
- Discharge Coefficient of Turbine Cooling Holes: A ReviewJournal of Turbomachinery, 1998
- Material Property Evaluation of Thick Thermal Barrier Coating SystemsJournal of Engineering for Gas Turbines and Power, 1989
- Study of forced convective heat transfer in curved pipes (2nd report, turbulent region)International Journal of Heat and Mass Transfer, 1967