The Wear Properties of TiC/Al-Based Composite Coating Applied by Laser Cladding
Open Access
Abstract
Aluminum powders with different concentrations of TiC ceramic particles were applied to an AZ31B magnesium alloy by laser cladding. Due to differences in coefficients of thermal expansion, the distribution of TiC ceramic particles in the cladding layer was not uniform. The results show that the degree of TiC ceramic particle agglomeration in the cladding layer increases with increasing TiC content. The phases of cladding metal mainly consisted of Al, γ-Al12Mg17, β-Al3Mg2, and TiC. The γ-Al12Mg17 phase mainly distributed to the bottom of the cladding layer, and the β-Al3Mg2 phase distributed to the middle and surface areas. The existence of the γ-Al12Mg17 phase enhanced the hardness of the fusion zone. The microhardness of the cladding layer increased with increasing TiC ceramic particle content. An appropriate TiC content improved the wear resistance of the cladding layer. When the TiC content was excessive, the agglomeration behavior of TiC ceramic particles strongly affected the wear resistance of the coatings.Keywords
Funding Information
- Natural Science Foundation of Tianjin Municipal Science and Technology Commission (18JCQNJC04100)
- National Key R&D Program of China (2018YFB1107900)
- National Natural Science Foundation of China (51575383)
This publication has 20 references indexed in Scilit:
- Refining effect of TiC on primary M7C3 in hypereutectic Fe Cr C harden-surface welding coating: Experimental research and first-principles calculationJournal of Alloys and Compounds, 2017
- Geometrical and microstructural characteristics of the TIG-CMT hybrid welding in 6061 aluminum alloy claddingJournal of Materials Processing Technology, 2017
- Role of Laser Cladding Parameters in Composite Coating (Al-SiC) on Aluminum AlloyJournal of Thermal Spray Technology, 2016
- DEVELOPMENT OF LASER SURFACE TECHNOLOGIES FOR ANTI-CORROSION ON MAGNESIUM ALLOYS: A REVIEWSurface Review and Letters, 2016
- A Novel Method for Resistance Plug Welding of 7075 Aluminum AlloyMaterials and Manufacturing Processes, 2016
- Laser cladding of a Mg based Mg–Gd–Y–Zr alloy with Al–Si powdersApplied Surface Science, 2016
- Analysis and optimization of process parameters in Al–SiCp laser claddingOptics and Lasers in Engineering, 2016
- Effect of Thermal Frequency on AA6061 Aluminum Alloy Double Pulsed Gas Metal Arc WeldingMaterials and Manufacturing Processes, 2015
- Investigations of laser clad, thermal sprayed and laser remelted AlSi20-coatings on magnesium alloy AZ31B under constant and cycling thermal loadSurface and Coatings Technology, 2014
- Retardation of surface corrosion of biodegradable magnesium-based materials by aluminum ion implantationApplied Surface Science, 2012