Coupled Flow and Swirl-Distortion Characteristics of a Lateral Intake–Axial Fan Interaction
Open Access
Abstract
Lateral intakes generate distorted inflow and complex swirl structures upstream of axial fans. Steady and unsteady numerical simulations were performed to investigate the coupled flow field between a lateral intake and an axial-fan rotor. The local normalized axial mass-flux factor φ, together with swirl descriptors, was employed to characterize the flow structure. The results show that swirl distortion at the aerodynamic interface plane (AIP) exhibits distinct radial stratification and circumferential non-uniformity, and that these characteristics vary with operating conditions. The circumferential non-uniformity is associated with the lateral-intake inflow, whereas the pronounced near-tip variation is consistent with an increasing influence of rotor-related tip flow structures at lower flow rates. In the unsteady analysis, periodic fluctuations of φ, SD, and SI vary with spanwise and circumferential location and are strongest near the blade tip. A non-zero frequency component between the rotational frequency and blade-passing frequency is identified in φ, SD, and SI over the entire blade span rather than being confined to the tip region. It indicates that the component is likely associated with the interaction between the circumferentially non-uniform intake flow and the rotor motion. These findings provide a basis for further investigation of rotor aerodynamic loading under distorted inflow conditions.Keywords
This publication has 16 references indexed in Scilit:
- High Throughflow StreamVane Swirl Distortion Generators: Design and AnalysisJournal of Engineering for Gas Turbines and Power, 2023
- A study of fan-distortion interaction within the fan rotorProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020
- Effects of Stall Precursor-Suppressed Casing Treatment on a Low-Speed Compressor With Swirl DistortionJournal of Fluids Engineering, 2018
- Effects of Flow Loss and Inlet Distortions Caused by Radial Inlet on the Performance of Centrifugal Compressor Stage2015
- Integrated Test and Evaluation Techniques as Applied to an Inlet Swirl Investigation Using the F109 Gas Turbine Engine2008
- The Inlet Flow Structure of a Centrifugal Compressor Stage and Its Influence on the Compressor PerformanceJournal of Fluids Engineering, 2003
- The Influence of Transient Inlet Distortions on the Instability Inception of a Low-Pressure Compressor in a Turbofan EngineJournal of Turbomachinery, 2000
- Steady Performance Measurements of a Turbofan Engine With Inlet Distortions Containing Co- and Counterrotating Swirl From an Intake Diffuser for Hypersonic FlightJournal of Turbomachinery, 2000
- An Experimental and Computational Investigation of Flow in a Radial Inlet of an Industrial Pipeline Centrifugal CompressorJournal of Turbomachinery, 1996
- The Influence of Inlet Swirl Distortions on the Performance of a Jet Propulsion Two-Stage Axial CompressorJournal of Turbomachinery, 1991