An Analysis of Switch Thermal Noise in SAR Converters
- 16 October 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (12) , 1927-1931
Abstract
This brief presents a comprehensive model of the thermal noise introduced by switches in Successive Approximation Register (SAR) Analog-to-Digital Converters (ADCs). This noise source may become relevant in low-speed SAR designs, where it can be mitigated by properly tuning the comparator bandwidth and sizing the capacitive Digital-to-Analog Converter (CDAC) switches. In Noise-Shaping SARs (NS-SARs), two contributions arise: one is injected during the conversion process, and the second is added during residue generation. The former is suppressed by the noise-shaping loop, while the latter is transferred directly to the output; however, it can be mitigated by properly sizing the amplifier bandwidth. Qualitative insights and design guidelines are provided.Keywords
This publication has 18 references indexed in Scilit:
- A 20MHz-BW 12.3-ENOB NS SAR ADC with a 3rd-order Multi-Input Filter and a PVT-Robust Ratio-Based FIA2025
- A 13.8-ENOB Fully Dynamic Third-Order Noise-Shaping SAR ADC in a Single-Amplifier EF-CIFF Structure With Hardware-Reusing kT/C Noise CancellationIEEE Journal of Solid-State Circuits, 2021
- A 13-bit 0.005-mm2 40-MS/s SAR ADC With kT/C Noise CancellationIEEE Journal of Solid-State Circuits, 2020
- 9.4 A 4th-Order Cascaded-Noise-Shaping SAR ADC with 88dB SNDR Over 100kHz Bandwidth2020
- A 5-GS/s 158.6-mW 9.4-ENOB Passive-Sampling Time-Interleaved Three-Stage Pipelined-SAR ADC With Analog-Digital Corrections in 28-nm CMOSIEEE Journal of Solid-State Circuits, 2020
- 20.2 A 40MHz-BW 320MS/s Passive Noise-Shaping SAR ADC With Passive Signal-Residue Summation in 14nm FinFET2019
- An 11.0 bit ENOB, 9.8 fJ/conv.-step noise-shaping SAR ADC calibrated by least squares estimation2017
- 28.1 A 0.46mW 5MHz-BW 79.7dB-SNDR noise-shaping SAR ADC with dynamic-amplifier-based FIR-IIR filter2017
- A 10-bit Charge-Redistribution ADC Consuming 1.9 $\mu$W at 1 MS/sIEEE Journal of Solid-State Circuits, 2010
- An 820μW 9b 40MS/s Noise-Tolerant Dynamic-SAR ADC in 90nm Digital CMOS2008