Carlo Samori
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Carlo Samori has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Salvatore Levantino
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milan, Italy
101 shared publications - Andrea Leonardo Lacaita
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milan, Italy
86 shared publications - Andrea Bonfanti
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milano, Italy
26 shared publications - Luca Bertulessi
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milano, Italy
21 shared publications Dmytro Cherniak
Infineon Technologies AG, Villach, Austria
15 shared publications- Francesco Tesolin
Dipartimento di Elettronica, Informazione e Bioingegneria, Politecnico di Milano, Milan, Italy
11 shared publications
Latest Publications
- Open Access
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-17
A Low Jitter and Low Spur Fractional-N Digital PLL Based on a DTC Chopping Technique
This work presents a digital-to-time converter (DTC)-based fractional-N digital phase-locked loop (PLL) designed to achieve simultaneously low jitter and low spurs. We introduce a novel DTC chopping technique that effectively mitigates fractional spurs, which we identify as predominantly arising from even-order nonlinearity invariable-slope (VS) DTCs. The proposed technique suppresses such spurs by randomly alternating the DTC position between the reference and divider signal paths. In addition, it proves effective in reducing the DTC flicker noise contribution. To ensure robust operation across process, voltage, and temperature (PVT) spreads, the design incorporates several background adaptive digital algorithms. Fabricated in a 28-nm CMOS process, the synthesizer occupies an active area of 0.22 mm2 and consumes 16.7 mW. At a 9.275-GHz near-integer channel, the measured worst case in-band fractional spur remains below −63 dBc, and the integrated rms jitter under 80 fs, yielding a jitter-power figure of merit (FoM) of −249.8 dB.
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. PP (00189200) , 1-17
Open AccessA Low Jitter and Low Spur Fractional-N Digital PLL Based on a DTC Chopping Technique
This work presents a digital-to-time converter (DTC)-based fractional-N digital phase-locked loop (PLL) designed to achieve simultaneously low jitter and low spurs. We introduce a novel DTC chopping technique that effectively mitigates fractional spurs, which we identify as predominantly arising from even-order nonlinearity invariable-slope (VS) DTCs. The proposed technique suppresses such spurs by randomly alternating the DTC position between the reference and divider signal paths. In addition, it proves effective in reducing the DTC flicker noise contribution. To ensure robust operation across process, voltage, and temperature (PVT) spreads, the design incorporates several background adaptive digital algorithms. Fabricated in a 28-nm CMOS process, the synthesizer occupies an active area of 0.22 mm2 and consumes 16.7 mW. At a 9.275-GHz near-integer channel, the measured worst case in-band fractional spur remains below −63 dBc, and the integrated rms jitter under 80 fs, yielding a jitter-power figure of merit (FoM) of −249.8 dB.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A 20-MHz BW 12.3-ENOB Third-Order Noise-Shaping SAR ADC With Multi-Input Architecture and PVT-Robust Ratio-Based FIA
Noise-shaping successive approximation register (NS-SAR) ADCs combine high resolution with energy efficiency, but their performance degrades at bandwidths in the tens of MHz due to limited oversampling ratios (OSR) and adoption of low-order passive filters. This work introduces a $3{^{\text {rd}}}$ -order NS-SAR ADC that leverages a multi-input amplifier and a multi-input comparator, enabling independent optimization and flexible filter coefficient sizing. In addition, a ratio-based floating inverter amplifier ensures remarkable gain stability across process, voltage, and temperature (PVT) variations. Implemented in a 28-nm CMOS process, the prototype achieves 12.3-ENOB over a 20-MHz bandwidth while consuming 1.56 mW, resulting in a Schreier figure-of-merit (FoMS) of 177-dB with robust and consistent performance across PVT corners.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. PP (15498328) , 1-14
A 20-MHz BW 12.3-ENOB Third-Order Noise-Shaping SAR ADC With Multi-Input Architecture and PVT-Robust Ratio-Based FIA
Noise-shaping successive approximation register (NS-SAR) ADCs combine high resolution with energy efficiency, but their performance degrades at bandwidths in the tens of MHz due to limited oversampling ratios (OSR) and adoption of low-order passive filters. This work introduces a $3{^{\text {rd}}}$ -order NS-SAR ADC that leverages a multi-input amplifier and a multi-input comparator, enabling independent optimization and flexible filter coefficient sizing. In addition, a ratio-based floating inverter amplifier ensures remarkable gain stability across process, voltage, and temperature (PVT) variations. Implemented in a 28-nm CMOS process, the prototype achieves 12.3-ENOB over a 20-MHz bandwidth while consuming 1.56 mW, resulting in a Schreier figure-of-merit (FoMS) of 177-dB with robust and consistent performance across PVT corners.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4572-4586
A Low-Noise Digital PLL With an Adaptive Common-Mode Resonance Tuning Technique for Voltage-Biased Oscillators
This work presents a digital phase-locked loop (PLL) incorporating an adaptive common-mode (CM) resonance tuning technique applied to a voltage-biased digitally-controlled oscillator (DCO). The method leverages the principle that the sensitivity of the oscillator frequency to a dither signal injected into the gate voltage of the cross-coupled transistors diminishes to near zero when the CM resonance is optimally tuned for minimal phase noise (PN). By detecting and nullifying this sensitivity, the proposed technique automatically adjusts the CM resonance to its ideal value. This background operation is continuous across the entire tuning range. The concept was validated through a digital PLL prototype fabricated in a 28-nm CMOS process, which achieved a jitter of 45.9 fs, a power-versus-jitter figure-of-merit of −257 dB, and a PN of −146.6 dBc/Hz at 10-MHz offset from a 4.75-GHz carrier, all within an active area of 0.21 mm2 .
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (12) , 4572-4586
A Low-Noise Digital PLL With an Adaptive Common-Mode Resonance Tuning Technique for Voltage-Biased Oscillators
This work presents a digital phase-locked loop (PLL) incorporating an adaptive common-mode (CM) resonance tuning technique applied to a voltage-biased digitally-controlled oscillator (DCO). The method leverages the principle that the sensitivity of the oscillator frequency to a dither signal injected into the gate voltage of the cross-coupled transistors diminishes to near zero when the CM resonance is optimally tuned for minimal phase noise (PN). By detecting and nullifying this sensitivity, the proposed technique automatically adjusts the CM resonance to its ideal value. This background operation is continuous across the entire tuning range. The concept was validated through a digital PLL prototype fabricated in a 28-nm CMOS process, which achieved a jitter of 45.9 fs, a power-versus-jitter figure-of-merit of −257 dB, and a PN of −146.6 dBc/Hz at 10-MHz offset from a 4.75-GHz carrier, all within an active area of 0.21 mm2 .
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (12) , 1927-1931
An Analysis of Switch Thermal Noise in SAR Converters
This brief presents a comprehensive model of the thermal noise introduced by switches in Successive Approximation Register (SAR) Analog-to-Digital Converters (ADCs). This noise source may become relevant in low-speed SAR designs, where it can be mitigated by properly tuning the comparator bandwidth and sizing the capacitive Digital-to-Analog Converter (CDAC) switches. In Noise-Shaping SARs (NS-SARs), two contributions arise: one is injected during the conversion process, and the second is added during residue generation. The former is suppressed by the noise-shaping loop, while the latter is transferred directly to the output; however, it can be mitigated by properly sizing the amplifier bandwidth. Qualitative insights and design guidelines are provided.
- 16 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (12) , 1927-1931
An Analysis of Switch Thermal Noise in SAR Converters
This brief presents a comprehensive model of the thermal noise introduced by switches in Successive Approximation Register (SAR) Analog-to-Digital Converters (ADCs). This noise source may become relevant in low-speed SAR designs, where it can be mitigated by properly tuning the comparator bandwidth and sizing the capacitive Digital-to-Analog Converter (CDAC) switches. In Noise-Shaping SARs (NS-SARs), two contributions arise: one is injected during the conversion process, and the second is added during residue generation. The former is suppressed by the noise-shaping loop, while the latter is transferred directly to the output; however, it can be mitigated by properly sizing the amplifier bandwidth. Qualitative insights and design guidelines are provided.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (11) , 1680-1684
On the Application of the Principle of Energy Equipartition to Linear Time-Invariant RLC Networks
The energy equipartition principle, rooted in classical statistical mechanics, has been formerly tailored to predict the total integrated thermal noise in RLC circuits, assigning an average energy 1/2kT to every degree of freedom of the network. Although the implications of this result are primarily theoretical, it can still be used in some practical cases and as verification, based on first principles, of the noise estimate. In this brief, we show that the definition of degrees of freedom must be substantially revised to properly evaluate the total average thermal noise energy in RLC networks with multiple reactive components. By exploiting the state-space representation of a system and the property of controllability, we highlight the impact of network degeneracies such as capacitor-only cut-sets and inductor-only loops on the energy equipartition. As a key result, we show that a correct application of the principle of energy equipartition is achieved by assigning an average energy 1/2kT to each nonzero natural frequency of the RLC network. Some representative examples are illustrated that fully support our findings.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 72 (11) , 1680-1684
On the Application of the Principle of Energy Equipartition to Linear Time-Invariant RLC Networks
The energy equipartition principle, rooted in classical statistical mechanics, has been formerly tailored to predict the total integrated thermal noise in RLC circuits, assigning an average energy 1/2kT to every degree of freedom of the network. Although the implications of this result are primarily theoretical, it can still be used in some practical cases and as verification, based on first principles, of the noise estimate. In this brief, we show that the definition of degrees of freedom must be substantially revised to properly evaluate the total average thermal noise energy in RLC networks with multiple reactive components. By exploiting the state-space representation of a system and the property of controllability, we highlight the impact of network degeneracies such as capacitor-only cut-sets and inductor-only loops on the energy equipartition. As a key result, we show that a correct application of the principle of energy equipartition is achieved by assigning an average energy 1/2kT to each nonzero natural frequency of the RLC network. Some representative examples are illustrated that fully support our findings.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 331-342
A Low-Jitter Fractional- N Digital PLL With Spur Cancellation Based on a Multi-DTC Topology
This work presents a low-jitter and low-spur fractional-N digital phase-locked loop (PLL) with a multi-path topology, each path having its own digital-to-time converter (DTC) and phase detector (PD). We show that, by driving each DTC with properly shifted quantization error sequences and then combining the PD outputs, the dominant fractional spurs due to DTC non-linearity can be canceled out and a significant reduction in DTC jitter is obtained. A number of background adaptive digital algorithms are introduced to ensure a robust operation across PVT spreads. The implemented PLL prototype, fabricated in a 28 nm CMOS process, has an active area of 0.36 mm2 and dissipates 17.9 mW. At 9.25 GHz near-integer channels, the measured worst case fractional spur is below $-\textrm {60}$ dBc, with an rms jitter of 77.1 fs, leading to $-\textrm {249.7}$ dB jitter-power figure-of-merit.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 331-342
A Low-Jitter Fractional- N Digital PLL With Spur Cancellation Based on a Multi-DTC Topology
This work presents a low-jitter and low-spur fractional-N digital phase-locked loop (PLL) with a multi-path topology, each path having its own digital-to-time converter (DTC) and phase detector (PD). We show that, by driving each DTC with properly shifted quantization error sequences and then combining the PD outputs, the dominant fractional spurs due to DTC non-linearity can be canceled out and a significant reduction in DTC jitter is obtained. A number of background adaptive digital algorithms are introduced to ensure a robust operation across PVT spreads. The implemented PLL prototype, fabricated in a 28 nm CMOS process, has an active area of 0.36 mm2 and dissipates 17.9 mW. At 9.25 GHz near-integer channels, the measured worst case fractional spur is below $-\textrm {60}$ dBc, with an rms jitter of 77.1 fs, leading to $-\textrm {249.7}$ dB jitter-power figure-of-merit.
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (12) , 3915-3927
A 10-GHz Digital-PLL-Based Chirp Generator With Parabolic Non-Uniform Digital Predistortion for FMCW Radars
This article describes a 10-GHz chirp generator for frequency-modulated continuous-wave (FMCW) radars, that is based on a digital PLL (DPLL) with a two-point injection of the modulation signal. A new digital predistortion (DPD) algorithm is introduced that is specifically tailored to mitigate the impact of the nonlinear non-smooth tuning curve of a digitally controlled oscillator (DCO) optimized for a low phase noise. The algorithm estimates in the background a non-uniform piecewise parabolic (PWP) interpolation of the digital inverse of the DCO tuning curve, using an adaptive set of non-uniformly distributed breakpoints. The breakpoints are automatically placed at the corner points of the tuning characteristic. The chirp generator, implemented in a 28-nm CMOS process, dissipates 21 mW and generates sawtooth and triangular chirp frequency modulations with slope up to 680 MHz/ $\mu$ s and bandwidth up to 680 MHz, while keeping the rms frequency error below 150 kHz and the phase noise at 1-MHz offset at $-116.5$ dBc/Hz.
- 25 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 59 (12) , 3915-3927
A 10-GHz Digital-PLL-Based Chirp Generator With Parabolic Non-Uniform Digital Predistortion for FMCW Radars
This article describes a 10-GHz chirp generator for frequency-modulated continuous-wave (FMCW) radars, that is based on a digital PLL (DPLL) with a two-point injection of the modulation signal. A new digital predistortion (DPD) algorithm is introduced that is specifically tailored to mitigate the impact of the nonlinear non-smooth tuning curve of a digitally controlled oscillator (DCO) optimized for a low phase noise. The algorithm estimates in the background a non-uniform piecewise parabolic (PWP) interpolation of the digital inverse of the DCO tuning curve, using an adaptive set of non-uniformly distributed breakpoints. The breakpoints are automatically placed at the corner points of the tuning characteristic. The chirp generator, implemented in a 28-nm CMOS process, dissipates 21 mW and generates sawtooth and triangular chirp frequency modulations with slope up to 680 MHz/ $\mu$ s and bandwidth up to 680 MHz, while keeping the rms frequency error below 150 kHz and the phase noise at 1-MHz offset at $-116.5$ dBc/Hz.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (2) , 456-468
A 2-GS/s Time-Interleaved ADC With Embedded Background Calibrations and a Novel Reference Buffer for Reduced Inter-Channel Crosstalk
Time-interleaved (TI) analog-to-digital converters (ADCs) are an established architecture, but fundamental problems still exist that prevent replicating the performance of each sub-ADC to the overall TI ADC. This article presents different techniques to overcome the main challenges in implementing an interleaved converter: 1) driving the ADC with sufficient linearity and bandwidth; 2) avoiding the crosstalk through the reference voltage; and 3) mitigating the effect of inter-channel mismatches. The proposed techniques are applied to a 2 TI ADC implemented in a TSMC 28 bulk CMOS process consisting of eight 11bit 250 successive approximation register (SAR) ADCs. The prototype achieves a signal-to-noise plus distortion ratio (SNDR) and a spurious-free dynamic range (SFDR) of 57.3and 70.1, respectively. The SNDR degrades on average by only 1.76compared with the sub-ADCs, demonstrating the effectiveness of the proposed techniques. With a power consumption of 118.6, including input buffer, digital calibrations, and SAR ADCs, the TI ADC achieves a 99 Walden figure of merit (FoM) and a 156.6 Schreier FoM.
- 12 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 60 (2) , 456-468
A 2-GS/s Time-Interleaved ADC With Embedded Background Calibrations and a Novel Reference Buffer for Reduced Inter-Channel Crosstalk
Time-interleaved (TI) analog-to-digital converters (ADCs) are an established architecture, but fundamental problems still exist that prevent replicating the performance of each sub-ADC to the overall TI ADC. This article presents different techniques to overcome the main challenges in implementing an interleaved converter: 1) driving the ADC with sufficient linearity and bandwidth; 2) avoiding the crosstalk through the reference voltage; and 3) mitigating the effect of inter-channel mismatches. The proposed techniques are applied to a 2 TI ADC implemented in a TSMC 28 bulk CMOS process consisting of eight 11bit 250 successive approximation register (SAR) ADCs. The prototype achieves a signal-to-noise plus distortion ratio (SNDR) and a spurious-free dynamic range (SFDR) of 57.3and 70.1, respectively. The SNDR degrades on average by only 1.76compared with the sub-ADCs, demonstrating the effectiveness of the proposed techniques. With a power consumption of 118.6, including input buffer, digital calibrations, and SAR ADCs, the TI ADC achieves a 99 Walden figure of merit (FoM) and a 156.6 Schreier FoM.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (3) , 1551-1555
A 250-MS/s 9.9-ENOB 80.7 dB-SFDR Top-Plate Input SAR ADC With Charge Linearization
This paper presents a linearity enhancement method, named charge linearization technique (CLT), for top-plate input successive approximation register (SAR) data converters. The proposed CLT removes the linearity degradation due to the non-linear parasitic capacitance of the comparator. Consequently, the constraint on the size of the comparator is relieved. An 11-bit redundant SAR converter featuring the proposed linearization method has been designed and fabricated in a 28-nm CMOS process. The converter achieves a 61.3-dB signal-to-noise-and-distortion ratio (SNDR) and 80.7-dB spurious-free dynamic range (SFDR) while running at 250 MS/s and consuming 5.04 mW from a 0.9-V supply. The aforementioned techniquse enhances the SNDR and SFDR by up to 2.5 dB and 17.4 dB, respectively.
- 28 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 71 (3) , 1551-1555
A 250-MS/s 9.9-ENOB 80.7 dB-SFDR Top-Plate Input SAR ADC With Charge Linearization
This paper presents a linearity enhancement method, named charge linearization technique (CLT), for top-plate input successive approximation register (SAR) data converters. The proposed CLT removes the linearity degradation due to the non-linear parasitic capacitance of the comparator. Consequently, the constraint on the size of the comparator is relieved. An 11-bit redundant SAR converter featuring the proposed linearization method has been designed and fabricated in a 28-nm CMOS process. The converter achieves a 61.3-dB signal-to-noise-and-distortion ratio (SNDR) and 80.7-dB spurious-free dynamic range (SFDR) while running at 250 MS/s and consuming 5.04 mW from a 0.9-V supply. The aforementioned techniquse enhances the SNDR and SFDR by up to 2.5 dB and 17.4 dB, respectively.