The Air Permeability and the Porosity of Polymer Materials Based on 3D-Printed Hybrid Non-Woven Needle-Punched Fabrics
Open Access
Abstract
The possibility of controlling the porosity and, as a result, the permeability of fibrous non-woven fabrics was studied. Modification of experimental samples was performed on equipment with adjustable heating and compression. It was found that the modification regimes affected the formation of the porous structure. We found that there was a relationship between the permeability coefficient and the porosity coefficient of the materials when the modification speed and temperature were varied. A model is proposed for predicting the permeability for modified material with a given porosity. As the result, a new hybrid composite material with reversible dynamic color characteristics that changed under the influence of ultraviolet and/or thermal exposure was produced. The developed technology consists of: manufacture of the non-woven needle-punched fabrics, surface structuring, material extrusion, additive manufacturing (FFF technology) and the stencil technique of ink-layer adding. In our investigation, we (a) obtained fibrous polymer materials with a porosity gradient in thickness, (b) determined the dependence of the material’s porosity coefficient on the speed and temperature of the modification and (c) developed a model for calculating the porosity coefficient of the materials with specified technological parameters.Keywords
Funding Information
- Ministry of Science and Higher Education of the Russian Federation (FZRR-2023-0003)
This publication has 36 references indexed in Scilit:
- Nonwoven fabrics developed from agriculture and industrial waste for acoustic and thermal applicationsCellulose, 2023
- Methods for Modeling and Predicting Deformation Modes of Functioning of Geotextile NonwovensFibre Chemistry, 2022
- Regulation of the Wettability of Nonwoven Cloth by Oxyfluorination to Improve its Impregnation by LatexFibre Chemistry, 2020
- Additive Manufacturing of Biomechanically Tailored Meshes for Compliant Wearable and Implantable DevicesAdvanced Functional Materials, 2019
- In-situ synthesis of silica aerogel in polyethylene terephthalate fibre nonwovens and their composite properties on acoustical absorption behaviorJournal of Porous Materials, 2017
- Unipolar Corona Discharge Effect on Filtering Capacity of Polypropylene Non-Woven FabricsFibre Chemistry, 2017
- Preparation of MWCNTs/CuPc/Ag modified conductive polyester fiber with chemical liquid depositionJournal of Materials Science: Materials in Electronics, 2015
- Processed Nonwoven Needlepunched Materials with Increased StrengthFibre Chemistry, 2015
- Influence of polymer type, composition, and interface on the structural and mechanical properties of core/sheath type bicomponent nonwoven fibersJournal of Materials Science, 2012
- Multiple surface structures in polyolefins formed by modification methodsJournal of Applied Polymer Science, 2005