Significance of Annealing Twins in Laser Ultrasonic Measurements of Grain Size in High-Strength Low-Alloy Steels
Open Access
- 19 March 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (6) , 3901
Abstract
In this study, we demonstrate the significance of austenite annealing twin boundaries when calibrating laser ultrasonic measurements for gauging austenite grain size in situ during the thermomechanical processing of high-strength low-alloy steels. Simple calculations show how differences in twinning density can lead to errors in grain size measurements if twins are disregarded during calibration and the method is used for a broad range of steels. Conversely, when calibration is performed using alloys with a metastable austenite microstructure at room temperature, the same calibration is suitable for a broad range of HSLA steels, provided that annealing twins are taken into account. Since light optical microscopy does not allow the characterization of annealing twins in low-alloy steel, the verification of the laser ultrasonic results was conducted using the novel approach of comparing the twinned grain sizes obtained using the ultrasonic method in low-alloy steels with the austenite grain maps reconstructed from martensite orientation maps measured using electron backscatter diffraction. Finally, we show how differences in twinning density occur even for alloys with a roughly similar stacking fault energy, further highlighting the importance of annealing twins in the calibration of laser ultrasonic measurements for industrial use.Keywords
Funding Information
- VINNOVA (2018-03916, RFCS-2018-847296)
- Research Fund for Coal and Steel (2018-03916, RFCS-2018-847296)
This publication has 18 references indexed in Scilit:
- An advanced approach to reconstructing parent orientation maps in the case of approximate orientation relations: Application to steelsActa Materialia, 2012
- In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steelActa Materialia, 2012
- Laser ultrasonics for process control in the metal industryNondestructive Testing and Evaluation, 2011
- Mapping the parent austenite orientation reconstructed from the orientation of martensite by EBSD and its application to ausformed martensiteActa Materialia, 2010
- Thickness and grain size monitoring in seamless tube-making process using laser ultrasonicsNDT & E International, 2006
- Thermo-Calc & DICTRA, computational tools for materials scienceCalphad, 2002
- A new technique for the quantitative real-time monitoring of austenite grain growth in steelScripta Materialia, 2000
- Formation of annealing twins in f.c.c. crystalsActa Materialia, 1997
- Study of annealing twins in fcc metals and alloysMetallurgical Transactions A, 1990
- A general mechanism of martensitic nucleation: Part I. General concepts and the FCC → HCP transformationMetallurgical Transactions A, 1976