Implementation of Integrated VCSEL-Based Optical Feedback Interferometry Microfluidic Sensor System with Polymer Microoptics
Authors:
- Yu ZhaoYZYu Zhao
- Qingyue LiQLQingyue Li
- Jean-Baptiste DoucetJDJean-Baptiste Doucet
- Pierre-François CalmonPCPierre-François Calmon
- Fabien MesnilgrenteFMFabien Mesnilgrente
- Benjamin ReigBRBenjamin Reig
- Clément TroncheCTClément Tronche
- Thierry CampsTCThierry Camps
- Julien PerchouxJPJulien Perchoux
- Véronique BardinalVBVéronique Bardinal
Open Access
- 13 December 2019
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 9 (24) , 5484
Abstract
Using the optical feedback interferometry (OFI) technique, we demonstrated a miniaturized and compact sensor system based on a dedicated optical source for flowmetry at the micro-scale. In the system, polymer microlenses were integrated directly on a VCSEL (vertical-cavity surface-emitting laser) chip and the microfluidic channel chip surface using polymer-based micro-fabrication technologies. In particular, at a post-process stage, we integrated a collimation lens on a VCSEL chip of small dimensions (200 µm × 200 µm × 150 µm). This process was enabled by the soft-printing of dry thick resist films and through direct laser writing technology. We performed flow rate measurements using this new compact system, with a conventional bulk glass lens configuration for system performance evaluation. A maximum 33 dB signal-to-noise ratio was achieved from this novel ultra-compact system. To our knowledge, this is the highest signal level achieved by existing OFI based flowmetry sensors.Keywords
Funding Information
- Agence Nationale de la Recherche (ANR-15-CE19-0012 DOCT-VCSEL)
This publication has 29 references indexed in Scilit:
- Flow profile measurement in microchannel using the optical feedback interferometry sensing techniqueMicrofluidics and Nanofluidics, 2012
- Fabrication of epoxy spherical microstructures by controlled drop-on-demand inkjet printingJournal of Micromechanics and Microengineering, 2012
- Hybrid polymer microlens arrays with high numerical apertures fabricated using simple ink-jet printing techniqueOptical Materials Express, 2011
- Review of cell and particle trapping in microfluidic systemsAnalytica Chimica Acta, 2009
- Review of laser speckle contrast techniques for visualizing tissue perfusionLasers in Medical Science, 2008
- Experimental and numerical study of droplets hydrodynamics in microchannelsAIChE Journal, 2006
- Size measurements of droplets and bubbles by advanced interferometric laser imaging techniqueMeasurement Science and Technology, 2002
- Microfluidics-a reviewJournal of Micromechanics and Microengineering, 1993
- Voltage change across the self-coupled semiconductor laserIEEE Journal of Quantum Electronics, 1981
- External optical feedback effects on semiconductor injection laser propertiesIEEE Journal of Quantum Electronics, 1980