Effect of nucleating agents on the electrical properties of cross‐linked polyethylene under tensile stress
Open Access
- 22 December 2023
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in High Voltage
- Vol. 9 (2) , 429-439
Abstract
During the operation of high‐voltage cables, external stress and residual stress can affect the aggregated structure of insulating materials and lead to significant deterioration in their electrical performance. To investigate the evolution characteristics of the electrical properties of cross‐linked polyethylene (XLPE) under mechanical stress, this paper explains the relationship between the aggregated structure of XLPE and its electrical properties and proposes a method for improving insulation performance under mechanical stress. The results show that metallocene polyethylene used as a nucleating agent can promote crystallisation through heterogeneous nucleation and increase Young's modulus by non‐uniform nucleation, increasing crystallinity and reducing interplanar spacing, resulting in more complete crystal forms and reduced damage to the aggregated structure during the tensile process. After nucleating agent modification, the XLPE crystallisation becomes more uniform, and interfacial adhesion forces increase. The weakened interface damage process between the amorphous and crystalline regions under tensile stress effectively inhibits the process of molecular chain polarisation turning and reduces trap density. The modified XLPE crystal structure shows a tendency towards densification and enhanced molecular chain interactions, which can reduce the damage to the aggregated structure under tensile stress, while the reduced free volume inside the material and the shortened average free path of carriers can weaken the damage of high‐energy electrons to molecular chains, thereby inhibiting the process of electrical tree degradation. The results show that nucleating agents have great potential for maintaining the stable operation of XLPE cables under mechanical stress.Keywords
This publication has 43 references indexed in Scilit:
- A STEERED MOLECULAR DYNAMICS STUDY ON ELASTIC BEHAVIOR OF POLYETHYLENE CHAINSActa Polymerica Sinica, 2008
- Melting behavior and isothermal crystallization kinetics of polypropylene/metallocene‐catalyzed polyethylene elastomer blendsJournal of Applied Polymer Science, 2008
- Effect of ethylene ionomers on the properties of crosslinked polyethyleneJournal of Applied Polymer Science, 2006
- Modeling of Shape Memory Induction and Recovery in Heat‐Shrinkable PolymersMacromolecular Theory and Simulations, 2005
- Electrical properties and morphology of polyethylene produced with a novel catalystIEEE Transactions on Dielectrics and Electrical Insulation, 2004
- Structure and properties of polyamide 6 blends with low‐density polyethylene grafted by itaconic acid and with neutralized carboxyl groupsJournal of Applied Polymer Science, 2004
- Influence of post-manufacturing residual mechanical stress and crosslinking by-products on dielectric strength of HV extruded cablesIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- Dielectric breakdown of new type polymerized polyethylene using a single-site catalystIEEE Transactions on Dielectrics and Electrical Insulation, 1999
- Influence of internal mechanical stress and strain on electrical performance of polyethylene electrical treeing resistanceIEEE Transactions on Dielectrics and Electrical Insulation, 1996
- Treeing in mechanically strained h.v.-cable polymers using conducting polymer electrodesProceedings of the Institution of Electrical Engineers, 1974