Design and Fabrication of a 300 GHz Modified Sine Waveguide Traveling-Wave Tube Using a Nanocomputer Numerical Control Machine
- 29 May 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (7) , 2955-2962
Abstract
The sine waveguide slow-wave structure is a promising interaction circuit for traveling-wave tubes in the terahertz region because it possesses advantageous properties such as high transmission, easy fabrication, and elimination of the electron beam tunnel. These waveguides could be fabricated by nanocomputer numerical control (CNC) machining, a fabrication method capable of fabricating microscale components. In our study, we evaluate the practical feasibility of manufacturing 300-GHz sine waveguides with the ideal design, using nano-CNC machining. It is found that the ideal sine waveguide circuit must be modified, because of the limitations imposed by the actual tool size of the nano-CNC machine. Simulations of cold- and hot-tests of the circuit-including the electron beam effect-were conducted for both the ideal and the modified sine waveguide circuits. A modified sine waveguide was successfully machined using a nano-CNC machine with a 0.12-mm diameter tool tip. The S-parameters of the fabricated circuit were measured and compared to simulation data. A detailed analysis of the measured transmission loss was performed, and this loss was found to be attributable to a gap left by the assembly process between the two copper plates.Keywords
Funding Information
- Agency for Defense Development (UD150043RD)
This publication has 22 references indexed in Scilit:
- Nano-CNC Machining of Sub-THz Vacuum Electron DevicesIEEE Transactions on Electron Devices, 2016
- Microfabrication and cold testing of copper circuits for a 50-watt 220-GHz traveling wave tube2013
- Design and Realization Aspects of 1-THz Cascade Backward Wave Amplifier Based on Double Corrugated WaveguideIEEE Transactions on Electron Devices, 2013
- 0.22 THz wideband sheet electron beam traveling wave tube amplifier: Cold test measurements and beam wave interaction analysisPhysics of Plasmas, 2012
- Sine Waveguide for 0.22-THz Traveling-Wave TubeIEEE Electron Device Letters, 2011
- Nano CNC milling technology for terahertz vacuum electronic devices2011
- UV-LIGA microfabrication of 220 GHz sheet beam amplifier gratings with SU-8 photoresistsJournal of Micromechanics and Microengineering, 2010
- Terahertz vacuum electronic circuits fabricated by UV lithographic molding and deep reactive ion etchingApplied Physics Letters, 2009
- Microfabrication of millimeter wave vacuum electron devices by two-step deep-etch x-ray lithographyApplied Physics Letters, 2006
- Folded Waveguide Traveling-Wave Tube Sources for Terahertz RadiationIEEE Transactions on Plasma Science, 2004