Multi-objective optimization of FSW variables on joint properties of AA5754 aluminum alloy using Taguchi approach and grey relational analysis
Open Access
- 15 January 2024
- journal article
- research article
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 130 (9-10) , 4235-4250
Abstract
Friction stir welding (FSW) processing of the joint is a technique to improve the quality of the weld. The present research employed the friction stir welding technique to butt-weld AA5754 plates, whereby the joints of every weld case were identified based on their tensile strength, hardness, and impact toughness. The plates were joined by varying the rotational speeds, welding speeds, and tool tilt angles. A multi-objective optimization Taguchi’s design of experiments approach and grey relational analysis (GRA) were used in this study to assess the combined effects of the process variables. The developed models are evaluated for sufficiency, and then the most significant parameters are determined using the analysis of variance (ANOVA). The results of the ANOVA showed that the rotational speed has a maximum contribution of 55.24%, 59%, and 46.27% in obtaining the optimal values of tensile strength, hardness, and impact toughness, respectively. It was found that formability and mechanical behaviors increased with increasing tilt angle for the tilt angle range examined in the current study. The two methods provide the same results, and the optimal conditions are a rotational speed of 1000 rpm, a welding speed of 60 mm/min, and a tilt angle of 2.5°. The optimal values for tensile strength, hardness, and impact toughness, respectively, were found to be 136 MPa, 85.25 HV, and 13 J. Significant implications for the welding industry may arise from the highly favorable outcomes in terms of microstructure and mechanical attributes.Keywords
All Related Versions
Funding Information
- Higher Technological Institute 10th of Ramadan
This publication has 59 references indexed in Scilit:
- Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weldTransactions of Nonferrous Metals Society of China, 2013
- Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi MethodJournal of Materials Engineering and Performance, 2013
- The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheetsMaterials & Design (1980-2015), 2012
- Predicting Grain Size and Tensile Strength of Friction Stir Welded Joints of AA7075-T6Aluminium AlloyMaterials and Manufacturing Processes, 2012
- Optimizing friction stir welding parameters to maximize tensile strength of AA2219 aluminum alloy jointsMetals and Materials International, 2009
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- The use of a grey-based Taguchi method for optimizing multi-response simulation problemsEngineering Optimization, 2008
- Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysisThe International Journal of Advanced Manufacturing Technology, 2005
- Microstructural studies of friction stir welds in 2024-T3 aluminumMaterials Science and Engineering: A, 2002
- Introduction to Quality Engineering: Designing Quality into Products and ProcessesTechnometrics, 1989