Multi-objective optimization of FSW variables on joint properties of AA5754 aluminum alloy using Taguchi approach and grey relational analysis
Authors:
- Saleh SobhySSSaleh Sobhy
- Rehab E ElbadawiRERehab E Elbadawi
- Said ZoalfakarSZSaid Zoalfakar
Preprint
- 4 October 2023
- preprint
- Published by Springer Nature in Research Square
Abstract
The friction stir welding (FSW) process was applied to butt-weld AA5754 plates, and the joints of each weld case were identified by their tensile strength, hardness, and impact toughness. The combined effects of the process variables rotation speed, welding speed, and tilt angle have been evaluated in the present study using Taguchi's design of experiments approach and grey relational analysis (GRA). A multi-objective optimization approach (Taguchi method and GRA) was used to optimize and rank the process variables. The developed models are evaluated for sufficiency, and the most significant terms are found using the ANOVA approach. The results of the ANOVA showed that the rotational speed has a maximum contribution of 55.24%, 59%, and 46.27% in obtaining the optimal values of tensile strength, hardness, and impact toughness, respectively. Finding an optimal parameter that offers the maximum value of all replies requires the use of the GRA and Taguchi Technique by Similarity to Suitable Solution. The two methods provide the same results, and the optimal conditions are a rotational speed of 1000 rpm, a welding speed of 60 mm/min, and a tilt angle of 2.5 degrees. The optimal values for tensile strength, hardness, and impact toughness, respectively, were found to be 136 MPa, 85.25 HV, and 13 J.Keywords
All Related Versions
This publication has 43 references indexed in Scilit:
- Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weldTransactions of Nonferrous Metals Society of China, 2013
- Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi MethodJournal of Materials Engineering and Performance, 2013
- The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheetsMaterials & Design (1980-2015), 2012
- Impact of Interface Temperature over Flank Wear in Hard Turning Using Carbide InsertsProcedia Engineering, 2012
- Predicting Grain Size and Tensile Strength of Friction Stir Welded Joints of AA7075-T6Aluminium AlloyMaterials and Manufacturing Processes, 2012
- Optimizing friction stir welding parameters to maximize tensile strength of AA2219 aluminum alloy jointsMetals and Materials International, 2009
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- The use of a grey-based Taguchi method for optimizing multi-response simulation problemsEngineering Optimization, 2008
- Determination of optimum parameters for multi-performance characteristics in drilling by using grey relational analysisThe International Journal of Advanced Manufacturing Technology, 2005
- Microstructural studies of friction stir welds in 2024-T3 aluminumMaterials Science and Engineering: A, 2002