A Wearable Electronic Device With an Air Curtain Shield and Two‐Stage Curved Electrostatic Precipitation Module for Personal Respirator Protection
Authors:
- Serim S. KwakSKSerim S. Kwak
- Kabin KangKKKabin Kang
- Gwangtaek LeeGLGwangtaek Lee
- Hak Joon KimHak Joon Kim
Open Access
- 1 January 2026
- journal article
- Published by Wiley in Indoor Air
- Vol. 2026 (1)
Abstract
Conventional face masks suffer from limitations such as high pressure drop, discomfort, and limited reusability. To address these issues, we developed a wearable respiratory protection device (WRPD) that combines an air curtain shield with a curved electrostatic precipitation (EP) module. The curved EP module showed a high fine particle (0.3 μ m) removal efficiency of 99.3 % ± 0.6 % at −3.5 kV and generated low levels of ozone below 0.24 ppb. However, the efficiency of the EP module decreased to 85.8 % ± 0.8 % when it was integrated into the WRPD. In the WRPD, the air curtain shield efficiently blocked airborne and droplet‐sized particles with 91.6 % ± 1.8 % efficiency at flow rates exceeding 241 L/min under 0.7 m/s particle intrusion but showed limited effectiveness for submicron particles. However, the full WRPD system with both the air curtain shield and curved EP module operating achieved 94.5% removal efficiency for submicron particles and 99.8 % ± 0.2 % for larger airborne and droplet‐sized particles. The air curtain shield not only prevented ambient air mixing but also enhanced the purity of the air delivered by the curved EP module by more than 10% compared to the WRPD operated using only the EP module.Keywords
Funding Information
- Korea Institute of Machinery and Materials (NK256A)
This publication has 63 references indexed in Scilit:
- Exploring the potential of a novel electrostatic precipitator as an alternative to air filters in air purifiersBuilding and Environment, 2025
- Personalized air curtain optimized to reduce fine particle exposure in industrial environments with different indoor airflow conditionsBuilding and Environment, 2024
- A study on the structure of garment-hood-embedded air curtain with fine dust protection functionBuilding and Environment, 2023
- Protection against inhalation of gaseous contaminants in industrial environments by a personalized air curtainBuilding and Environment, 2021
- Improvement of particle clean air delivery rate of an ion spray electrostatic air cleaner with zero-ozone based on diffusion chargingBuilding and Environment, 2020
- Development of a new portable air sampler based on electrostatic precipitationEnvironmental Science and Pollution Research, 2015
- Indoor environmental quality and pupil perception in Italian primary schoolsBuilding and Environment, 2012
- Size Analysis and Identification of Particles2012
- On dimensionless numbersChemical Engineering Research and Design, 2008
- 2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Health Care SettingsAmerican Journal of Infection Control, 2007