Optimizing aeration rates via bio-methane potential test for enhanced biodrying efficiency of refuse-derived fuel-3
Open Access
- 5 August 2024
- journal article
- research article
- Published by Center of Biomass and Renewable Energy Scientia Academy in International Journal of Renewable Energy Development
- Vol. 13 (5) , 941-951
Abstract
Aeration forms a critical part of the biodrying of refuse-derived fuel-3 (RDF-3) and significantly affects the fuel’s energy potential. Understanding the organic content (OC) of RDF-3 is crucial for determining the optimal aeration strategy. In this study, we conducted a bio-methane potential (BMP) test to estimate the OC by observing the conversion of organic matter into methane (CH₄) and carbon dioxide (CO₂). The observation of BMP was conducted using anaerobic digestion approach where substrate and inoculum are important parameters considered for the success of this test. Various ratios substrate-to-inoculum (S/I) were explored to assess their impact on biogas production, our research involved testing four S/I ratios (0.25, 0.5, 1.0, and 1.5) focusing on identifying the optimal aeration strategy. Based on stoichiometric calculations, the sample’s biogas yield per gram volatile solid indicates RDF-3’s OC is 1.5%. This OC value played a role in establishing the appropriate aeration rate (AR) for the biodrying process, which was determined to be 0.6 m³/kg.day, indicating the action of effective microbial degradation processes. Ensuring the correct AR is vital for maximizing the energy potential of RDF-3. Implementing optimized aeration rates based on the BMP test in waste management practices can significantly improve RDF-3 biodrying efficiency. This approach enhances RDF quality, reduces moisture, increases calorific value, and minimizes greenhouse gas emissions, leading to more sustainable and efficient waste-to-energy conversion.Keywords
Funding Information
- The Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi (KMUTT), and the Center of Excellence on Energy Technology and Environment
This publication has 49 references indexed in Scilit:
- Enhancing biogas production through anaerobic co-digestion of thickened sewage sludge and rice strawAin Shams Engineering Journal, 2024
- Tool development for estimation of biomethane potential of different food waste for a sustainable bioeconomyBiomass and Bioenergy, 2024
- An environmental and economic assessment for biomethane injection and natural gas heavy goods vehiclesApplied Energy, 2024
- Improvement of energy recovery potential of wet-refuse-derived fuel through bio-drying processJournal of Material Cycles and Waste Management, 2022
- Factors affecting anaerobic digestion for biogas production: a review2022
- Quality improvement of mixed MSW drying using a pilot-scale solar greenhouse biodrying systemJournal of Material Cycles and Waste Management, 2021
- Assessment of Composition Changes, Stability Degree and the Potential of Biogas Formation of Sewage Sludge Composts During Maturation ProcessWaste and Biomass Valorization, 2019
- Alternative Fuels from Waste Products in Cement Industry2019
- Characterization of composted sewage sludge during the maturation process: a pilot scale studyEnvironmental Science and Pollution Research, 2018
- Biochemical methane potential (BMP) of food waste and primary sludge: Influence of inoculum pre-incubation and inoculum sourceBioresource Technology, 2012