The Effect of Engine Operating Conditions on Engine-out Particulate Matter from a Gasoline Direct-injection Engine during Cold-start.
- 10 September 2012
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This work investigates the effect of engine operating conditions and exhaust sampling conditions (i.e. dilution ratio) on engine-out, nano-scale, particulate matter emissions from a gasoline direct-injection engine during cold-start and warm-up transients. The engine used for this research was an in-line four cylinder, four stroke, wall-guided direct-injection, turbo-charged and inter-cooled 1.6 l gasoline engine. A fast-response particulate spectrometer for exhaust nano-particle measurement up to 1000 nm was utilized, along with a spark-plug mounted pressure transducer for combustion analysis. It was observed that the total particle count decreases during the cold-start transient, and has a distinct relationship with the engine body temperature. Tests have shown that the engine body temperature may be used as a control strategy for engine-out particulate emissions. This work has identified that up to 95 % of particles emitted during the cold-start transient are in the 5-23 nm size range. It is also evident that the dilution ratio of the exhaust sample has a significant effect on the particulate matter number and size distribution.Keywords
This publication has 22 references indexed in Scilit:
- Mechanisms of spray formation and combustion from a multi-hole injector with E85 and gasolineCombustion and Flame, 2010
- Mixture Preparation and Combustion Variability in a Spray-Guided DISI EngineSAE International Journal of Advances and Current Practices in Mobility, 2007
- Cold Start Particulate Emissions from a Second Generation DI Gasoline EngineSAE International Journal of Advances and Current Practices in Mobility, 2007
- Particulate Matter and Hydrocarbon Emissions Measurements: Comparing First and Second Generation DISI with PFI in Single Cylinder Optical EnginesSAE International Journal of Advances and Current Practices in Mobility, 2006
- Real-world performance of catalytic convertersProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2005
- Particulate Emissions from a Direct-Injection Spark-Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2005
- Fuel Volatility Effects on Mixture Preparation and Performance in a GDI Engine During Cold StartSAE International Journal of Advances and Current Practices in Mobility, 2001
- Fuel Distribution and Combustion Characteristics in a Direct-Injection, Spark-Ignited (DISI) Engine Under Stratified OperationSAE International Journal of Advances and Current Practices in Mobility, 2001
- Development of Advanced Emission-Control Technologies for Gasoline Direct-Injection EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- Reducing Cold-Start Emissions by Catalytic Converter Thermal ManagementSAE International Journal of Advances and Current Practices in Mobility, 1995